Intrinsic optical-fiber sensor for nerve agent sensing

A novel chemical-sensing technique to detect the nerve agent sarin stimulant dimethylmethylphosphonate (DMMP) is presented. This technique uses a combination of doped polypyrrole as an active chemical material coated on an optical fiber to form an intrinsic fiber-optic sensor. Sensitivity of up to 26 ppm of DMMP with response time of a few seconds is demonstrated. Influence of three different dopants, i.e., 1,5 naphthalene disulphonic acid, anthraquinone 2 sulphonic acid, and hydrochloric acid is investigated for sensor response and sensitivity. Two polymer processing techniques, i.e., in situ deposition and monomer vapor phase deposition is investigated for optimal polypyrrole morphology for DMMP sensitivity. The influence of substrate nature, i.e., hydrophilic and hydrophobic, on sensor sensitivity is studied. Organophosphate specific binding sites have been created in polypyrrole structure using Cu/sup 2+/ ions to enhance DMMP response. The selectivity issue is addressed by testing the sensor in the presence of other gases like ammonia, water vapor, and acetone which influence the electronic properties of polypyrrole.

[1]  Robert Arthur Lieberman,et al.  Recent progress in intrinsic fiber optic chemical sensing , 1991, Other Conferences.

[2]  K. Potje-Kamloth,et al.  Insulator—semiconductor composite polyoxyphenylene—polypyrrole: electrochemical synthesis, characterization and chemical sensing properties , 1998 .

[3]  Arthur J. Epstein,et al.  Secondary doping in polyaniline , 1995 .

[4]  Daewon Sohn,et al.  Fabrication and characterization of conductive polypyrrole thin film prepared by in situ vapor-phase polymerization , 2003 .

[5]  G. Collins,et al.  Conductive polymer-coated fabrics for chemical sensing , 1996 .

[6]  Jianming Yuan,et al.  Fiber optic chemical sensors using a modified conducting polymer cladding , 2001, SPIE Optics East.

[7]  A. MacDiarmid,et al.  Fiber Optic Sensors and Smart Fabrics , 2000 .

[8]  Yoshihito Osada,et al.  Polymer sensors and actuators , 2000 .

[9]  R. Lieberman.  Recent progress in intrinsic fiber-optic chemical sensing II , 1993 .

[10]  Mahmoud A. El-Sherif,et al.  Analysis on Spatial Intensity Modulation for Fiber-optic Sensor Applications , 1996 .

[11]  N. Munro.  Toxicity of the Organophosphate Chemical Warfare Agents GA, GB, and VX: Implications for Public Protection. , 1994, Environmental health perspectives.

[12]  K. Potje-Kamloth.  Chemical Gas Sensors Based on Organic Semiconductor Polypyrrole , 2002 .

[13]  A. MacDiarmid,et al.  Critical dependency of the conductivity of polypyrrole and polyaniline films on the hydrophobicity/hydrophilicity of the substrate surface , 1999 .

[14]  Alan G. MacDiarmid,et al.  In-situ deposited thin films of polypyrrole: conformational changes induced by variation of dopant and substrate surface , 1997 .

[15]  Jiri Janata,et al.  Conducting polymers in electronic chemical sensors , 2003, Nature materials.

[16]  A. Epstein,et al.  'Synthetic metals': a novel role for organic polymers , 1989, Images of the Twenty-First Century. Proceedings of the Annual International Engineering in Medicine and Biology Society,.

[17]  A. El Hadri,et al.  Study of the action of gases on a polypyrrole film , 1990 .

[18]  Anuvat Sirivat,et al.  Electrical conductivity response of polypyrrole to acetone vapor: effect of dopant anions and interaction mechanisms , 2004 .

[19]  Antonio J. Ricco,et al.  Selective surface acoustic wave-based organophosphonate chemical sensor employing a self-assembled composite monolayer: A new paradigm for sensor design , 1992 .

[20]  Jing Liu,et al.  Polypyrrole doped with 1,5-naphthalenedisulfonic acid , 2001 .