Influence of micro-rolling on the strength and ductility of plasma-arc additively manufactured Ti-6Al-4V alloys

[1]  Gaofeng Liu,et al.  Ti-6Al-4V alloy strengthening via instantaneous phase transformation induced by electropulsing , 2021, Journal of Alloys and Compounds.

[2]  R. Khatirkar,et al.  A Review of Microstructure and Texture Evolution during Plastic Deformation and Heat Treatment of β-Ti alloys , 2021, Journal of Alloys and Compounds.

[3]  Jinzhong Lu,et al.  Achieving high strength and ductility in selective laser melting Ti-6Al-4V alloy by laser shock peening , 2021, Journal of Alloys and Compounds.

[4]  Xinghua Yu,et al.  A review on wire and arc additive manufacturing of titanium alloy , 2021 .

[5]  Guilan Wang,et al.  Towards superior fatigue crack growth resistance of TC4-DT alloy by in-situ rolled wire-arc additive manufacturing , 2021, Journal of Materials Research and Technology.

[6]  X. Zhan,et al.  Microstructure and texture evolution of Ti–6Al–4V alloy T-joint fabricated by dual laser beam bilateral synchronous welding , 2021, Materials Science and Engineering: A.

[7]  C. Shen,et al.  Fabrication of γ-TiAl intermetallic alloy using the twin-wire plasma arc additive manufacturing process: Microstructure evolution and mechanical properties , 2021 .

[8]  Xiaoyan Zeng,et al.  Grain boundary discontinuity and performance improvement mechanism of wire arc additive manufactured Ti–6Al–4V , 2021, Journal of Alloys and Compounds.

[9]  M. R. Alkahari,et al.  Review on effect of heat input for wire arc additive manufacturing process , 2021 .

[10]  Chong Wang,et al.  The effect of wire size on high deposition rate wire and plasma arc additive manufacture of Ti-6Al-4V , 2021 .

[11]  A. K. Syed,et al.  The role of microstructure and local crystallographic orientation near porosity defects on the high cycle fatigue life of an additive manufactured Ti-6Al-4V , 2020, Materials Characterization.

[12]  Binshi Xu,et al.  Enhanced strength and ductility in thin Ti-6Al-4V alloy components by alternating the thermal cycle strategy during plasma arc additive manufacturing , 2019, Materials Science and Engineering: A.

[13]  J. Watts,et al.  The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319 , 2018, Journal of Materials Processing Technology.

[14]  Xin Lin,et al.  Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V , 2018, Journal of Alloys and Compounds.

[15]  N. Tsuji,et al.  Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy , 2018, Materials Science and Engineering: A.

[16]  T. Tancogne-Dejean,et al.  Heterogeneous random medium plasticity and fracture model of additively-manufactured Ti-6A1-4V , 2018 .

[17]  Chenglei Diao,et al.  Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing , 2018, International Journal of Heat and Mass Transfer.

[18]  Xin Lin,et al.  Achieving superior ductility for laser solid formed extra low interstitial Ti-6Al-4V titanium alloy through equiaxial alpha microstructure , 2018 .

[19]  Paul A. Colegrove,et al.  Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement , 2018 .

[20]  Shu Beng Tor,et al.  Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review , 2018 .

[21]  Daniel P. Satko,et al.  Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2Nb , 2017 .

[22]  Jun Wei,et al.  Effects of Processing Parameters on Surface Roughness of Additive Manufactured Ti-6Al-4V via Electron Beam Melting , 2017, Materials.

[23]  Zhe Sun,et al.  Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment. , 2017, Journal of the mechanical behavior of biomedical materials.

[24]  Zhigang Li,et al.  Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing , 2016 .

[25]  L. Murr,et al.  Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting , 2016 .

[26]  Nam Phan,et al.  Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research , 2016 .

[27]  P. Colegrove,et al.  Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components , 2015, Metallurgical and Materials Transactions A.

[28]  Zengxi Pan,et al.  The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding , 2015 .

[29]  Todd Palmer,et al.  Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing , 2015 .

[30]  N. Shamsaei,et al.  Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V , 2015 .

[31]  Philip B. Prangnell,et al.  Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting , 2013 .

[32]  Guilan Wang,et al.  Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling , 2013 .

[33]  Christoph Leyens,et al.  Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM) , 2012 .

[34]  M. A. Rao,et al.  State of art on wire feed additive manufacturing of Ti-6Al-4V alloy , 2020 .

[35]  K. Hagihara,et al.  Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting , 2017 .