The Development and Engineering Application of a Fiber Reinforced Hybrid Matrix Composite for Structural Retrofitting and Damage Mitigation
暂无分享,去创建一个
[1] Gang-Len Chang,et al. Overheight Vehicle Collisions with Highway Bridges , 2004 .
[2] J. N. Ashton,et al. Measurement and theoretical modelling of the damping properties of a uni-directional glass/epoxy composite , 1996 .
[3] Holger Svensson,et al. Protection of bridge piers against ship collision , 2009 .
[4] Hiroshi Mutsuyoshi,et al. Structural behavior of hybrid FRP composite I-beam , 2010 .
[5] L. Tong,et al. Experimental study of retrofitted reinforced concrete shear wall and concrete-encased steel girders using a new CarbonFlex composite for damage stabilization , 2013 .
[6] E. Barbero. Introduction to Composite Materials Design , 1998 .
[7] Bharat Bhushan,et al. Nanomechanical characterisation of solid surfaces and thin films , 2003 .
[8] M. Toyoda,et al. Control of mechanical properties in structural steel welds by numerical simulation of coupling among temperature, microstructure, and macro-mechanics , 2004 .
[9] Anand Asundi,et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review , 2009 .
[10] P. Theocaris. Experimental evaluation of the plastic zones for steady mode-III crack growth , 1987 .
[11] C. Lomnitz,et al. The San Salvador earthquake of May 3, 1965 , 1966 .
[12] J. L. Stanford,et al. Rubber-toughened polyurethane network and composite materials , 1987 .
[13] John W. Gillespie,et al. Characterization of the vibration damping loss factor of glass and graphite fiber composites , 1991 .
[14] Lateral ReinforcementFor High-Strength Concrete Columns. Lateral Reinforcement For High-Strength Concrete Columns , 1985 .
[15] S. Chaturvedi,et al. The influence of fiber length and fiber orientation on damping and stiffness of polymer composite materials , 1986 .
[16] S.S.J. Moy,et al. STRESS ANALYSIS OF STEEL BEAMS REINFORCED WITH A BONDED CFRP PLATE , 2004 .
[17] B. D. Agarwal,et al. Analysis and Performance of Fiber Composites , 1980 .
[18] Robert Plunkett,et al. Dynamic Mechanical Behavior of Fiber-Reinforced Composites: Measurement and Analysis , 1976 .
[19] C. Bakis,et al. Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete applications , 2001 .
[20] C. Chamis,et al. Tailoring of composite links for optimal damped elasto-dynamic performance , 1989 .
[21] F. Ren,et al. Rehabilitation of notch damaged steel beams using a carbon fiber reinforced hybrid polymeric-matrix composite , 2013 .
[22] N. Jalili,et al. Passive vibration damping enhancement using carbon nanotube-epoxy reinforced composites , 2005 .
[23] Yail J. Kim,et al. Interaction between CFRP-repair and initial damage of wide-flange steel beams subjected to three-point bending , 2011 .
[24] George Fernandez,et al. Performance of hurricane shutters under impact by roof tiles , 2010 .
[25] Fidelis R Mashiri,et al. A comparative study on fatigue behaviour of steel beams retrofitted with welding, pultruded CFRP plates and wet layup CFRP sheets , 2012 .
[26] O. Hoffman. The Brittle Strength of Orthotropic Materials , 1967 .
[27] Study of Stress Intensity Factor of a Cracked Steel Plate with a Single-Side CFRP Composite Patching , 2010 .
[28] X. Zhao,et al. State-of-the-art review on FRP strengthened steel structures , 2007 .
[29] R. Gibson,et al. Random and Impulse Techniques for Measurement of Damping in Composite Materials , 1984 .
[30] T. Khraishi,et al. Analytical Solutions for Crack Tip Plastic Zone Shape Using the Von Mises and Tresca Yield Criteria: Effects of Crack Mode and Stress Condition , 2004 .
[31] T. Attard,et al. Analytical Models and Guidelines for the Ductility Enhancement of Circular Reinforced Concrete Single-Column Bents Using Fiber-Reinforced Polymers , 2011 .
[32] A. F. Liu,et al. Mechanics and Mechanisms of Fracture: An Introduction , 2005 .
[33] S. El-Tawil,et al. STRENGTH AND DUCTILITY OF CONCRETE ENCASED COMPOSITE COLUMNS , 1999 .
[34] W. Peters,et al. Digital Imaging Techniques In Experimental Stress Analysis , 1982 .
[35] Mo Shing Cheung,et al. Seismic Strengthening and Repair of Reinforced Concrete Shear Walls , 2000 .
[36] Robert D. Adams,et al. Effect of Fibre Orientation and Laminate Geometry on the Dynamic Properties of CFRP , 1973 .
[37] Zhishen Wu,et al. Experimental Study on the Fatigue Behavior of Steel Beams Strengthened with Different Fiber-Reinforced Composite Plates , 2012 .
[38] O. Buyukozturk,et al. FAILURE BEHAVIOR OF PRECRACKED CONCRETE BEAMS RETROFITTED WITH FRP , 1998 .
[39] Pierino Lestuzzi,et al. Static cyclic tests on lightly reinforced concrete shear walls , 2005 .
[40] Mitsuyoshi Akiyama,et al. Ductility Evaluation of Concrete-Encased Steel Bridge Piers Subjected to Lateral Cyclic Loading , 2011 .
[41] John S. Villarrubia,et al. Nanoindentation of polymers: an overview , 2001 .
[42] W. Gersch,et al. Estimation of power spectra with finite-order autoregressive models , 1973 .
[43] J. Srawley,et al. Stress-Intensity Factors for Three-Point Bend Specimens by Boundary Collocation , 1965 .
[44] Michael N. Fardis,et al. Concrete encased in fiberglass reinforced plastic , 1981 .
[45] X. Gu,et al. Rapid Strengthening of Masonry Structures Cracked in Earthquakes Using Fiber Composite Materials , 2012 .
[47] Stephen W. Tsai,et al. A General Theory of Strength for Anisotropic Materials , 1971 .
[48] Zvi Hashin,et al. The Elastic Moduli of Heterogeneous Materials , 1962 .
[49] Abílio M. P. De Jesus,et al. Analysis of solid wood beams strengthened with CFRP laminates of distinct lengths , 2012 .
[50] Achintya Haldar,et al. Bridge fatigue damage evaluation and updating using non-destructive inspections , 1996 .
[51] Oguzhan Bayrak,et al. Seismic performance of full-scale reinforced concrete columns , 2008 .
[52] Kishor C. Mehta,et al. Knowledge-Based System for Wind Damage to Buildings , 1994 .
[53] B. Paul. PREDICTION OF ELASTIC CONSTANTS OF MULTI-PHASE MATERIALS , 1959 .
[54] John F. Hall,et al. The role of damping in seismic isolation , 1999 .
[55] Gregory G. Deierlein,et al. Fracture Toughness Demands in Welded Beam-Column Moment Connections , 2000 .
[56] Phalguni Mukhopadhyaya,et al. Interface Shear Stress: A New Design Criterion for Plate Debonding , 2001 .
[57] W. H. Peters,et al. Application of an optimized digital correlation method to planar deformation analysis , 1986, Image Vis. Comput..
[58] Jun Ma,et al. Tribological properties of epoxy/polyurea composite , 2009 .
[59] William G. Byers,et al. FATIGUE RELIABILITY REASSESSMENT APPLICATIONS: STATE-OF-THE-ART PAPER , 1997 .
[60] Nirav Shah,et al. The vulnerability of residential window glass to lightweight windborne debris , 2010 .
[61] Dennis R. Mertz,et al. REHABILITATION OF STEEL BRIDGE GIRDERS THROUGH THE APPLICATION OF ADVANCED COMPOSITE MATERIALS , 1996 .
[62] Surendra P. Shah,et al. Constitutive Model for Biaxial Cyclic Loading of Concrete , 1986 .
[63] Michael D. Kotsovos,et al. Behavior of Reinforced Concrete Structural Walls: Strength, Deformation Characteristics, and Failure Mechanism , 1990 .
[64] V. Raizer,et al. NATURAL DISASTERS AND STRUCTURAL SURVIVABILITY , 2009 .
[65] Singiresu S. Rao. Vibration of Continuous Systems , 2019 .
[66] Kishor C. Mehta,et al. Wind Damage Observations and Implications , 1979 .
[67] D. Palermo,et al. Modeling of RC Shear Walls Retrofitted with Steel Plates or FRP Sheets , 2012 .
[68] R. Hewitt,et al. The Dynamic Properties of Unidirectional Carbon and Glass Fiber Reinforced Plastics in Torsion and Flexure , 1969 .
[69] Qingming Li,et al. Local impact effects of hard missiles on concrete targets , 2005 .
[70] J. C. Halpin,et al. Effects of Environmental Factors on Composite Materials. , 1969 .
[71] E. Evans,et al. Dynamic strength of molecular adhesion bonds. , 1997, Biophysical journal.
[72] Jon K. Ayscue. Hurricane damage to residential structures : risk and mitigation , 1996 .
[73] R. El-Hacha,et al. Anchorage System to Prestress FRP Laminates for Flexural Strengthening of Steel-Concrete Composite Girders , 2013 .
[74] J. Berthelot,et al. Damping analysis of unidirectional glass and Kevlar fibre composites , 2004 .
[75] G. Pharr,et al. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .
[76] Rajan Sen,et al. Strengthening steel bridge sections using CFRP laminates , 2001 .
[77] Thomas L. Attard,et al. Tornado-borne debris impact performance of an innovative storm safe room system protected by a carbon fiber reinforced hybrid polymeric-matrix composite , 2014 .
[78] J. E. Minor,et al. Windborne debris and the building envelope , 1994 .
[79] Scott T Smith,et al. Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review , 2003 .
[80] Stephanie L. Walkup,et al. Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02) , 2005 .
[81] R. P. Kennedy. A review of procedures for the analysis and design of concrete structures to resist missile impact effects , 1976 .
[82] Hamid Saadatmanesh,et al. Fatigue Strength of Steel Girders Strengthened with Carbon Fiber Reinforced Polymer Patch , 2003 .
[83] Gary R. Consolazio,et al. Probability of Collapse Expression for Bridges Subject to Barge Collision , 2013 .
[84] Hongbing Lu,et al. Nonlinearly Viscoelastic Nanoindentation of PMMA Under a Spherical Tip , 2013 .
[85] J. Tsai,et al. Enhancing Fracture Toughness of Glass/Epoxy Composites by Using Rubber Particles Together with Silica Nanoparticles , 2009 .
[86] Yunfeng Zhang,et al. Active Interaction Control of Tall Buildings Subjected to Near-Field Ground Motions , 2002 .
[87] T. Shimogo. Vibration Damping , 1994, Active and Passive Vibration Damping.
[88] Yail J. Kim,et al. CFRP Repair of Steel Beams with Various Initial Crack Configurations , 2011 .
[89] A. Y. Elghazouli,et al. A simplified crack model for weld fracture in steel moment connections , 2002 .
[90] Christoph Czaderski,et al. Debonding failure modes of flexural FRP-strengthened RC beams , 2008 .
[91] Sher Ali Mirza,et al. COMPARATIVE STRENGTH ANALYSES OF CONCRETE-ENCASED STEEL COMPOSITE COLUMNS , 2004 .
[92] Jang-Kyo Kim,et al. Vibration damping characteristics of carbon fiber-reinforced composites containing multi-walled carbon nanotubes , 2011 .
[93] T. Attard,et al. Post-yield material nonlinearity: Optimal homogeneous shear-frame sections and hysteretic behavior , 2005 .
[94] J. Teng,et al. Shear Capacity of Fiber-Reinforced Polymer-Strengthened Reinforced Concrete Beams: Fiber Reinforced Polymer Rupture , 2003 .
[95] H. Saadatmanesh,et al. REPAIR OF EARTHQUAKE-DAMAGED RC COLUMNS WITH FRP WRAPS , 1997 .
[96] W. F. Ranson,et al. Applications of digital-image-correlation techniques to experimental mechanics , 1985 .
[97] R. García,et al. Structural Property Improvements Through Hybridized Composites , 1987 .
[98] A. Yee. Modifying Matrix Materials for Tougher Composites , 1987 .
[99] S. Ali Mirza,et al. Flexural Stiffness of Composite Columns Subjected to Major Axis Bending , 1999 .
[100] U. Ramamurty,et al. Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene , 2009, Nanotechnology.
[101] G. G. Corbett,et al. Impact loading of plates and shells by free-flying projectiles: A review , 1996 .
[102] Robert Kliger,et al. Performance of steel beams strengthened with CFRP laminate – Part 1: Laboratory tests , 2010 .
[103] D. S. Parker,et al. Toughening mechanisms in core-shell rubber modified polycarbonate , 1990 .
[104] John R. Rice,et al. Contained plastic deformation near cracks and notches under longitudinal shear , 1966 .
[105] William D. Callister,et al. Materials Science and Engineering: An Introduction , 1985 .
[106] Kent A. Harries,et al. PREDICTIVE RESPONSE OF NOTCHED STEEL BEAMS REPAIRED WITH CFRP STRIPS INCLUDING BOND-SLIP BEHAVIOR , 2012 .
[107] J. Milne,et al. Non-Hookean Behaviour of Strong Carbon Fibres , 1968, Nature.
[108] The strength of pitch-based carbon fibre at high temperature , 1991, Journal of Materials Science.
[109] D. Lunn. FRP Anchorage Systems for Infill Masonry Structures , 2011 .
[110] Oral Büyüköztürk,et al. A fracture-based model for FRP debonding in strengthened beams , 2009 .
[111] Bing Li,et al. Tests on Seismically Damaged Reinforced Concrete Structural Walls Repaired Using Fiber-Reinforced Polymers , 2010 .
[112] Hongyu Zhou,et al. Rehabilitation and strength sustainability of fatigue damaged concrete–encased steel flexural members using a newly developed polymeric carbon–fiber composite , 2013 .
[113] George Z. Voyiadjis,et al. Mechanics of Composite Materials with MATLAB , 2005 .
[114] T. L. Attard,et al. Seismic FRP retrofit of circular single-column bents using a ductility wrap envelope to alter failure modes , 2011 .
[115] John W. Hutchinson,et al. Crack tip fields in strain gradient plasticity , 1996 .
[116] A. Machida,et al. Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review , 2002 .
[117] P. Wolf,et al. AN IMPROVED METHOD OF DIGITAL IMAGE CORRELATION , 1975 .
[118] Wenchao Song,et al. Behavior of Honeycomb FRP Sandwich Structure under Combined Effects of Service Load and Low Temperatures , 2011 .
[119] James M. Ricles,et al. Seismic Performance of Steel‐Encased Composite Columns , 1994 .
[120] O. Rabinovitch,et al. Damping and Viscoelastic Dynamic Response of RC Flexural Members Strengthened with Adhesively Bonded Composite Materials , 2007 .
[121] Antonio Nanni,et al. Composite Strengthening Technologies: Field Evaluation and Monitoring of Five Reinforced Concrete Bridges , 2006 .
[122] H. Saadatmanesh,et al. Design Guidelines for Flexural Strengthening of RC Beams with FRP Plates , 1998 .
[123] S. Shtrikman,et al. A variational approach to the theory of the elastic behaviour of multiphase materials , 1963 .
[124] Hamid Saadatmanesh,et al. Repair of damaged steel-concrete composite girders using carbon fiber-reinforced polymer sheets , 2003 .