Improving the Quality and Productivity of Molded Parts with a New Design of Conformal Cooling Channels for the Injection Molding Process

In materials processing, quality and productivity are notably important and must be controlled for each product type produced. In the injection molding process, quality is measured as the extent of warpage of molded parts and productivity is measured in terms of the molding cycle time. This paper presents a new design of milled grooved square shape (MGSS) conformal cooling channels, which provide more uniformity in cooling with a larger effective cooling surface area compared to circular and other types of cooling channels with a similar cross-section. This study examined the warpage of molded parts, and the cooling time, which affected the molding cycle time. A case study involving a front panel housing was performed, and the performance design of the MGSS conformal cooling channels was compared to that of conventional straight-drilled cooling channels by simulation using Autodesk Moldflow Insight 2013 and validated experimentally. The result of MGSS conformal cooling channels is in a good agreement with the result of simulation. The MGSS conformal cooling channels reduced the warpage in both x and y directions by 14% to 54% and improved the cooling time by 65% compared to straight-drilled cooling channels.

[1]  Y. Lam,et al.  A hybrid of mode-pursuing sampling method and genetic algorithm for minimization of injection molding warpage , 2010 .

[2]  Constantin Chassapis,et al.  Optimal cooling system design for multi-cavity injection molding , 1997 .

[3]  Guoqun Zhao,et al.  Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm , 2009 .

[4]  Hae-Sim Park,et al.  Design of conformal cooling channels for an automotive part , 2009 .

[5]  Lars-Erik Rännar,et al.  Efficient cooling with tool inserts manufactured by electron beam melting , 2007 .

[6]  Dong-Gyu Ahn,et al.  Manufacture of an injection mould with rapid and uniform cooling characteristics for the fan parts using a DMT process , 2010 .

[7]  Optimum cooling system design of a free-form injection mold using an abductive network , 2002 .

[8]  Mirigul Altan,et al.  Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods , 2010 .

[9]  D. E. Dimla,et al.  Design and optimisation of conformal cooling channels in injection moulding tools , 2005 .

[10]  Azlan Mohd Zain,et al.  Potential of conformal cooling channels in rapid heat cycle molding: A review , 2014 .

[11]  A. Mateus,et al.  Studies of rapid soft tooling with conformal cooling channels for plastic injection moulding , 2003 .

[12]  Zone-Ching Lin,et al.  Design of the cooling channels in nonrectangular plastic flat injection mold , 2002 .

[13]  Huamin Zhou,et al.  An acceleration method for the BEM-based cooling simulation of injection molding , 2009 .

[14]  Noboru Kikuchi,et al.  Closed loop direct metal deposition : art to part , 2000 .

[15]  Yuehua Gao,et al.  Surrogate-based process optimization for reducing warpage in injection molding , 2009 .

[16]  Andrew Y. C. Nee,et al.  Design and FEM analysis of the milled groove insert method for cooling of plastic injection moulds , 2004 .

[17]  H. Qiao.  A systematic computer-aided approach to cooling system optimal design in plastic injection molding , 2006 .

[18]  Cédric Le Bot,et al.  3D study of cooling system effect on the heat transfer during polymer injection molding , 2010 .

[19]  Ahmad Majdi Abdul Rani,et al.  Comparative Thermal Analysis of Circular and Profiled Cooling Channels for Injection Mold Tools , 2011 .

[20]  Babur Ozcelik,et al.  Warpage and structural analysis of thin shell plastic in the plastic injection molding , 2009 .

[21]  A. Sulong,et al.  Analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the Taguchi method , 2012 .

[22]  H. Qiao.  Transient mold cooling analysis using BEM with the time-dependent fundamental solution , 2005 .

[23]  M. Cima,et al.  Production of injection molding tooling with conformal cooling channels using the three dimensional printing process , 2000 .

[24]  Kang Tai,et al.  An evolutionary approach for cooling system optimization in plastic injection moulding , 2004 .

[25]  Hong-Seok Park,et al.  Optimization of conformal cooling channels with array of baffles for plastic injection mold , 2010 .

[26]  Huamin Zhou,et al.  Mold cooling simulation of the pressing process in TV panel production , 2005, Simul. Model. Pract. Theory.

[27]  Siavash Gheshmi,et al.  Optimization of injection molding process parameters using sequential simplex algorithm , 2011 .

[28]  Jay Shoemaker,et al.  Moldflow Design Guide: A Resource for Plastics Engineers , 2006 .

[29]  Seong Jin Park,et al.  Optimal cooling system design for the injection molding process , 1998 .

[30]  Natti S. Rao,et al.  Optimization of Cooling Systems in Injection Molds by an Easily Applicable Analytical Model , 2002 .

[31]  Azlan Mohd Zain,et al.  Milled Groove Square Shape Conformal Cooling Channels in Injection Molding Process , 2013 .

[32]  Hong-Seok Park,et al.  Design of U-shape milled groove conformal cooling channels for plastic injection mold , 2011 .