论文信息 - Fluid-pressure-assisted deep drawing

Fluid-pressure-assisted deep drawing

Abstract A technique for drawing cups being tested presently uses a hydraulic pressure to apply peripheral push on the flange, apply pressure in the die cavity to provide frictional support at the cup wall and provide excellent lubrication at the die radius. The blank holding force is provided separately. In this process displacement of the punch, the blank holder force and the counter pressure are controlled individually. A theoretical analysis and experimental results from the above hydraulic-pressure-assisted deep drawing process are presented in this paper.

S. Thiruvarudchelvan | Ming Jen Tan | M. Tan | S. Thiruvarudchelvan

[1] S. Thiruvarudchelvan,et al. Erratum to “Investigations into the hydraulic-pressure augmented deep drawing process” [J. Mater. Proc. Technol. 105 (1/2) (2000) 161–175] , 2001 .

[2] S. Thiruvarudchelvan. A NOVEL HYDRAULIC-PRESSURE AUGMENTED DEEP-DRAWING PROCESS FOR HIGH DRAW RATIOS , 1995 .

[3] Takeo Nakagawa,et al. Reverse Deep Drawing with Hydraulic Counter Pressure Using the Peripheral Pushing Effect , 1986 .

[4] A. A. Betser,et al. Hydroforming Process for Uniform Wall Thickness Products , 1977 .

[5] S. Yossifon,et al. On the Permissible Fluid-Pressure Path in Hydroforming Deep Drawing Processes—Analysis of Failures and Experiments , 1988 .

[6] S. Thiruvarudchelvan,et al. A note on fluid-pressure-assisted deep drawing processes , 2006 .

[7] Takeo Nakagawa,et al. Counter-Pressure Deep Drawing and its Application in the Forming of Automobile Parts , 1990 .