Threshold temperature optical fibre sensors

Abstract This paper presents a new approach to manufacture a threshold temperature sensor based on a biconical optical fibre taper. The presented sensor employs the influence of variable state of concentration of some isotropic materials like wax or paraffin. Application of the above- mentioned materials is an attempt to prove that there is a possibility to obtain a low-cost, repeatable and smart sensor working as an in-line element. Optical fibre taper was obtained from a standard single mode fibre (SMF28®) by using a low pressure gas burner technique. The diameter of the manufactured tapers was 6.0 ± 0.5 μm with the length of elongation equal to 30.50 ± 0.16 mm. The applied technology allowed to produce tapers with the losses of 0.183 ± 0.015 dB. Application of materials with different temperature transition points made it possible to obtain the threshold work at the temperatures connected directly with their conversion temperature. External materials at the temperatures above their melting points do not influence the propagation losses. For each of them two types of the protection area and position of the optical fibre taper were applied.

[1]  Nan Wu,et al.  Tapered Optical Fiber Sensor for Label-Free Detection of Biomolecules , 2011, Sensors.

[2]  Kok-Sing Lim,et al.  Microfiber loop resonator based temperature sensor , 2011 .

[3]  T. Birks,et al.  Shape of fiber tapers , 1992 .

[4]  B. Eggleton,et al.  Tapered photonic crystal fibers. , 2004, Optics express.

[5]  Jose Luis Santos,et al.  Analysis of Phase Interrogated SPR Fiber Optic Sensors With Bimetallic Layers , 2014, IEEE Sensors Journal.

[6]  P. Russell,et al.  Photonic Crystal Fibers , 2003, Science.

[7]  L. R. Jaroszewicz,et al.  Influence of tapering process on changes of optical fiber refractive index distribution along a structure , 2010 .

[8]  Magdy T. Zaky,et al.  Separation of different paraffin wax grades using two comparative deoiling techniques , 2007 .

[9]  Tingyun Wang,et al.  Special optical fiber for temperature sensing based on cladding-mode resonance. , 2008, Optics express.

[10]  Joel Villatoro,et al.  Fast detection of hydrogen with nano fiber tapers coated with ultra thin palladium layers. , 2005, Optics express.

[11]  J. E. Midwinter,et al.  Optical fibre telecommunications: Edited by S.E. Miller, and A.G. Chynoweth Published by Academic Press, 1979, pp 705, £28.20 , 1980 .

[12]  H. Arof,et al.  Fabrication and Applications of Microfiber , 2012 .

[13]  W. Peng,et al.  Tapered fiber optic surface plasmon resonance sensor for analyses of vapor and liquid phases. , 2005, Optics letters.

[14]  M. Mansuripur,et al.  Biconical Fiber Taper Sensors , 2006, IEEE Photonics Technology Letters.

[15]  Tingyun Wang,et al.  Single-mode tapered optical fiber for temperature sensor based on multimode interference , 2011, 2011 Asia Communications and Photonics Conference and Exhibition (ACP).

[16]  P. Russell,et al.  Endlessly single-mode photonic crystal fiber. , 1997, Optics letters.

[17]  A. Kersey,et al.  Fiber-optic Bragg-grating differential-temperature sensor , 1992, IEEE Photonics Technology Letters.

[18]  K. Okamoto.  Wave theory of optical waveguides , 2006 .

[19]  M. Murawski,et al.  Low-Loss Patch Cords by Effective Splicing of Various Photonic Crystal Fibers With Standard Single Mode Fiber , 2011, Journal of Lightwave Technology.