Specifications for CD control on current technology nodes have become very tight, especially for the gate level. Therefore all systematic errors during the patterning process should be corrected. For a long time, CD variations induced by any change in the local periodicity have been successfully addressed through model or/and rule based corrections. However, if long-range effects (stray light, etch, and mask writing process...) are often monitored, they are seldom taken into account in OPC flows. For the purpose of our study, a test mask has been designed to measure these latter effects separating the contributions of three different process steps (mask writing, exposure and etch). The resulting induced CD errors for several patterns are compared to the allowed error budget. Then, a methodology, usable in standard OPC flows, is proposed to calculate the required correction for any feature in any layout. The accuracy of the method will be demonstrated through experimental results.