Permanent Magnets and Machines

[1]  M. A. Jabbar,et al.  Choice of parameters in the hybrid permanent-magnet synchronous motor , 1979 .

[2]  J.F. Gieras,et al.  Analytical approach to cogging torque calculation of PM brushless motors , 2004, IEEE Transactions on Industry Applications.

[3]  B. Adkins,et al.  The permanent-magnet synchronous motor , 1962 .

[4]  James R. Woodbury.  The Design of Brushless DC Motor Systems , 1974, IEEE Transactions on Industrial Electronics and Control Instrumentation.

[5]  Timothy J. E. Miller,et al.  Analytical and numerical computation of air-gap magnetic fields in brushless motors with surface permanent magnets , 2000 .

[6]  S. Pekarek,et al.  Investigation of Force Generation in a Permanent Magnet Synchronous Machine , 2007, IEEE Transactions on Energy Conversion.

[7]  M. A. Jabbar,et al.  High-field self-starting permanent-magnet synchronous motor , 1981 .

[8]  Gordon R. Slemon.  On the design of high-performance surface-mounted PM motors , 1994 .

[9]  G. Slemon,et al.  A Method of Reducing Ripple Torque in a Permanent Magnet Motor without Skewing , 1992, Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation.

[10]  M. Jufer,et al.  Permanent-magnet synchronous motors: a comprehensive approach to cogging torque suppression , 1993 .

[11]  T.J.E. Miller.  Design of PM synchronous and brushless DC motors , 1993, Proceedings of IECON '93 - 19th Annual Conference of IEEE Industrial Electronics.

[12]  Chunting Mi,et al.  Minimization of iron losses of permanent magnet synchronous machines , 2005 .

[13]  Timothy J. E. Miller.  Brushless permanent-magnet motor drives , 1988 .

[14]  N. Demerdash,et al.  Special Losses in Rotors of Electronically Commutated Brushless DC Motors Induced by Non-Uniformly Rotating Amature MMFS , 1982, IEEE Transactions on Power Apparatus and Systems.

[15]  Tsuyoshi Higuchi,et al.  Optimization procedure of surface PM synchronous motors , 1997 .

[16]  John Y. Hung,et al.  Design of currents to reduce torque ripple in brushless permanent magnet motors , 1993 .

[17]  R. Krishnan,et al.  Switched reluctance motor drives : modeling, simulation, analysis, design, and applications , 2001 .

[18]  A.M. El-Refaie,et al.  Comparison of synchronous PM machine types for wide constant-power speed range operation , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[19]  Z.Q. Zhu,et al.  Permanent magnet brushless machines with unequal tooth widths and similar slot and pole numbers , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[20]  Thomas M. Jahns.  Torque Production in Permanent-Magnet Synchronous Motor Drives with Rectangular Current Excitation , 1984, IEEE Transactions on Industry Applications.

[21]  compensation of anisotropy effects in flux-confining permanent-magnet structures , 1989, International Magnetics Conference.

[22]  Hoang Le-Huy,et al.  Minimization of Torque Ripple in Brushless DC Motor Drives , 1986, IEEE Transactions on Industry Applications.

[23]  D. Howe,et al.  Optimal split ratio for permanent magnet brushless motors , 2006, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

[24]  V. Gangla,et al.  Electromechanical forces and torque in brushless permanent magnetic machines , 1991 .

[25]  R. Hanitsch,et al.  Saturation effects in small brushless DC motors. A simplified approach , 1996 .

[26]  N. Ertugrul,et al.  Analytical Prediction of Noise of Magnetic Origin Produced by Permanent Magnet Brushless Motors , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[27]  Z. Zhu,et al.  Analytical prediction of rotor eddy current loss in brushless machines equipped with surface-mounted permanent magnets. II. Accounting for eddy current reaction field , 2001, ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501).

[28]  Z. Zhu,et al.  Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field , 1993 .

[29]  Kais Atallah,et al.  The application of Halbach cylinders to brushless AC servo motors , 1998 .

[30]  F. Profumo,et al.  A comparison between the axial flux and the radial flux structures for PM synchronous motors , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[31]  Thomas A. Lipo,et al.  Development of an IGBT Inverter Driven Axial-Flux PM Synchronous Motor Drive , 1991 .

[32]  Herbert Weh,et al.  Analytische Bestimmung des Nutungseinflusses auf die Feldverteilung und die Wirbelstromverluste in dauermagneterregten Synchronmaschinen , 1980 .

[33]  Fang Deng,et al.  Analytical modeling of eddy-current losses caused by pulse-width-modulation switching in permanent-magnet brushless direct-current motors , 1998 .

[34]  Shigeo Morimoto,et al.  Rotor design optimisation of a multi-layer interior permanent-magnet synchronous motor , 1998 .

[35]  M.A. Rahman,et al.  Permanent magnet motors for brushless operation , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[36]  K. Atallah,et al.  Armature reaction field and winding inductances of slotless permanent-magnet brushless machines , 1998 .

[37]  A. A. Arkadan,et al.  Computation of winding inductances of permanent magnet brushless DC motors with damper windings by energy perturbation , 1988 .

[38]  Hans-Peter Nee,et al.  Determination of d and q reactances of permanent-magnet synchronous motors without measurements of the rotor position , 2000 .

[39]  Angelo Raciti,et al.  Experimental Determination of Equivalent Circuit Parameters for PM Synchronous Motors , 1992 .

[40]  K. Miyashita,et al.  Development of a High Speed 2-Pole Permanent Magnet Synchronous Motor , 1980, IEEE Transactions on Power Apparatus and Systems.

[41]  J. De La Ree,et al.  Torque production in permanent-magnet synchronous motors , 1989 .

[42]  D. Howe,et al.  Analytical prediction of the cogging torque in radial-field permanent magnet brushless motors , 1992 .

[43]  B. J. Chalmers.  Influence of saturation in brushless permanent-magnet motor drives , 1992 .

[44]  Xiaoyong Zhu,et al.  Design and analysis of a novel stator hybrid excited doubly salient permanent magnet brushless motor , 2005, 2005 International Conference on Electrical Machines and Systems.

[45]  D. Howe,et al.  Comparative study of permanent magnet brushless motors with all teeth and alternative teeth windings , 2004 .

[46]  R. Krishnan,et al.  Design and development of a user-friendly PC-based CAE software for the analysis of torque/speed/position controlled PM brushless DC motor drive system dynamics , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[47]  Hermann Wagensonner.  Untersuchungen über Synchronmaschinen mit dauermagnetischem Polsystem , 1939 .

[48]  J. Bastos,et al.  Torque ripple attenuation in permanent magnet synchronous motors , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[49]  T.J.E. Miller,et al.  Back-EMF waveforms and core losses in brushless DC motors , 1994 .

[50]  William G. Dunford,et al.  Comparison of sinusoidal excitation and trapezoidal excitation of a brushless permanent magnet motor , 1990 .

[51]  D.C. Hanselman,et al.  Minimum torque ripple, maximum efficiency excitation of brushless permanent magnet motors , 1994, IEEE Trans. Ind. Electron..

[52]  W. Volkrodt,et al.  The permanent-magnet synchronous motor , 1963 .

[53]  I. Husain,et al.  Permanent Magnet Synchronous Motor Magnet Designs with Skewing for Torque Ripple and Cogging Torque Reduction , 2007 .

[54]  A.G. Jack,et al.  The design of small high speed brushless DC drives with precise speed stability , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[55]  S. Morimoto,et al.  Effects and compensation of magnetic saturation in permanent magnet synchronous motor drives , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[56]  N. Bianchi,et al.  Analysis and design of a PM Brushless Motor for high-speed operations , 2005, IEEE Transactions on Energy Conversion.

[57]  Z. Zhu,et al.  Slotless brushless permanent magnet machines: influence of design parameters , 1999 .

[58]  Gordon R. Slemon,et al.  AN improved method of optimization for electrical machines , 1991 .

[59]  G. Henneberger,et al.  Influence of end winding leakage in permanent magnet excited synchronous machines with asymmetrical rotor design , 1993 .

[60]  D. Howe,et al.  The computer-aided design of magnetizing fixtures for the post-assembly magnetization of rare-earth permanent brushless DC motors , 1992, 1992. Digests of Intermag. International Magnetics Conference.

[61]  Z. Q. Zhu,et al.  Design and analysis of high-speed brushless permanent magnet motors , 1997 .

[62]  R.H. Miller,et al.  Comparison Between Features and Performance Characteristics of Fifteen HP Samarium Cobalt and Ferrite Based Brushless DC Motors Operated by Same Power Conditioner , 1983, IEEE Transactions on Power Apparatus and Systems.

[63]  G. Bauerlein,et al.  A Brushless DC Motor with Solid-State Commutation , 1962 .

[64]  D. Howe,et al.  Analytical prediction of stator flux density waveforms and iron losses in brushless DC machines, accounting for load condition , 2001, ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501).

[65]  Z. Zhu,et al.  Eddy-current loss in the rotor magnets of permanent-magnet brushless machines having a fractional number of slots per pole , 2005, IEEE Transactions on Magnetics.

[66]  V. Honsinger,et al.  Performance of Polyphase Permanent Magnet Machines , 1980, IEEE Transactions on Power Apparatus and Systems.

[67]  S. Morimoto,et al.  High performance servo drive system of salient pole permanent magnet synchronous motor , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[68]  J. Ofori-Tenkorrang,et al.  A comparative analysis of torque production in Halbach and conventional surface-mounted permanent-magnet synchronous motors , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[69]  Thomas A. Lipo,et al.  A synchronous/permanent magnet hybrid AC machine , 2000 .

[70]  Gordon R. Slemon,et al.  Steady-State Analysis of a Permanent Magnet Synchronous Motor Drive with Voltage-Source Inverter , 1981, IEEE Transactions on Industry Applications.

[71]  Z. Zhu,et al.  Magnetic field analysis and inductances of brushless DC machines with surface-mounted magnets and non-overlapping stator windings , 1995 .

[72]  C. Espanet,et al.  BLDC motor stator and rotor iron losses and thermal behavior based on lumped schemes and 3D FEM analysis , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[73]  D. Howe,et al.  Calculation of DQ-axis inductances of PM brushless ac machines accounting for skew , 2005, INTERMAG Asia 2005. Digests of the IEEE International Magnetics Conference, 2005..

[74]  Tomonobu Senjyu,et al.  Investigation of influences of various losses on electromagnetic torque for surface-mounted permanent magnet synchronous motors , 2003 .

[75]  K. Uezato,et al.  Parameter measurement for PMSM using adaptive identification , 2002, Industrial Electronics, 2002. ISIE 2002. Proceedings of the 2002 IEEE International Symposium on.

[76]  D. Ryutov,et al.  The Inductrack: a simpler approach to magnetic levitation , 2000, IEEE Transactions on Applied Superconductivity.

[77]  B. Ackermann,et al.  New technique for reducing cogging torque in a class of brushless DC motors , 1992 .

[78]  J. A. Walker,et al.  Measurement and application of flux-linkage and inductance in a permanent-magnet synchronous machine , 2004 .

[79]  K. Atallah,et al.  AN improved method for predicting iron losses in brushless permanent magnet DC drives , 1992, 1992. Digests of Intermag. International Magnetics Conference.

[80]  D. Howe,et al.  Vibration of PM Brushless Machines Having a Fractional Number of Slots Per Pole , 2006, IEEE Transactions on Magnetics.

[81]  T.A. Lipo,et al.  A novel permanent magnet motor with doubly salient structure , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[82]  Gordon R. Slemon,et al.  Operating Limits of Inverter-Driven Permanent Magnet Motor Drives , 1987, IEEE Transactions on Industry Applications.

[83]  J. Gieras,et al.  Performance analysis of a coreless permanent magnet brushless motor , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[84]  Z. Zhu,et al.  Instantaneous magnetic field distribution in brushless permanent magnet DC motors. III. Effect of stator slotting , 1993 .

[85]  Torque in nested Halbach cylinders , 1999, IEEE International Magnetics Conference.

[86]  P. Pillay,et al.  Application characteristics of permanent magnet synchronous and brushless DC motors for servo drives , 1991 .

[87]  V. Honsinger.  The Fields and Parameters of Interior Type AC Permanent Magnet Machines , 1982, IEEE Transactions on Power Apparatus and Systems.

[88]  T. Sebastian,et al.  Torque ripple analysis of a PM brushless DC motor using finite element method , 2004, IEEE Transactions on Energy Conversion.

[89]  Tomonobu Senjyu,et al.  Accurate parameter measurement for high speed permanent magnet synchronous motors , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[90]  Rene Spee,et al.  The effects of motor parameters on the performance of brushless DC drives , 1987, IEEE Power Electronics Specialists Conference.

[91]  V. Honsinger.  Permanent Magnet Machines: Asychronous Operation , 1980, IEEE Transactions on Power Apparatus and Systems.

[92]  F. Magnussen,et al.  Parasitic Effects in PM Machines With Concentrated Windings , 2005, IEEE Transactions on Industry Applications.

[93]  S. Nasar,et al.  Fields in permanent magnet linear synchronous machines , 1986 .

[94]  Chang Seop Koh,et al.  New cogging-torque reduction method for brushless permanent-magnet motors , 2003 .

[95]  Jacek F. Gieras,et al.  Calculation of synchronous reactances of small permanent-magnet alternating-current motors: comparison of analytical approach and finite element method with measurements , 1998 .

[96]  Z.Q. Zhu,et al.  Unbalanced Magnetic Forces in Permanent-Magnet Brushless Machines With Diametrically Asymmetric Phase Windings , 2005, IEEE Transactions on Industry Applications.

[97]  Z. Zhu,et al.  Instantaneous magnetic field distribution in brushless permanent magnet DC motors. II. Armature-reaction field , 1993 .

[98]  Z. Zhu,et al.  Halbach permanent magnet machines and applications: a review , 2001 .

[99]  Gordon R. Slemon,et al.  Modeling of iron losses of permanent-magnet synchronous motors , 2003 .

[100]  D. Howe,et al.  Analytical determination of the instantaneous airgap field in a brushless permanent magnet DC motor , 1991 .

[101]  F. Profumo,et al.  A low loss permanent magnet brushless DC motor utilizing tape wound amorphous iron , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[102]  David L. Trumper,et al.  Magnet arrays for synchronous machines , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[103]  P. Pillay,et al.  An investigation into the torque behavior of a brushless DC motor drive , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[104]  G. Slemon,et al.  Modelling of permanent magnet synchronous motors , 1986 .

[105]  Xian Liu,et al.  Modeling and Design Optimization Of Permanent Magnet Motors , 1992 .

[106]  A. Kusko,et al.  Definition of the brushless DC motor , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[107]  R Hanitsch,et al.  On the design of brushless dc linear motors with permanent magnets. , 1999 .

[108]  Seok-Myeong Jang,et al.  The influence of magnetization pattern on the rotor losses of permanent magnet high-speed machines , 2004 .

[109]  Hirofumi Akagi,et al.  A High Performance AC Servo System with Permanent Magnet Synchronous Motors , 1986, IEEE Transactions on Industrial Electronics.

[110]  Tomonobu Senjyu,et al.  A novel calculation method for iron loss resistance suitable in modeling permanent-magnet synchronous motors , 2002 .

[111]  R. Wrobel,et al.  Optimisation of a brushless motor excited by multi-polar permanent magnet array , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[112]  Z. Zhu,et al.  Instantaneous magnetic field distribution in permanent magnet brushless DC motors. IV. Magnetic field on load , 1993 .

[113]  Hwi-Beom Shin,et al.  Effect of magnetization direction on iron loss characteristic in brushless DC motor , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[114]  Noriaki K. Sato.  A Brushless DC Motor With Armature Induced Voltage Commutation , 1972 .