Biaxial deformation behaviour of duplex stainless steels: Experiments and crystal plasticity based stress predictions

[1]  G. Chai,et al.  Anisotropic work hardening behaviour in duplex stainless steel under uni-axial loading: Interplay between phase morphology and crystallographic texture , 2022, Materials Science and Engineering: A.

[2]  A. K. Kanjarla,et al.  A crystal plasticity investigation on the influence of orientation relationships on texture evolution during rolling in fcc/bcc two phase materials , 2022, Materials Today Communications.

[3]  A. K. Kanjarla,et al.  Bain variant dependent plastic anisotropy and formability in duplex stainless steels , 2021, Materials Letters.

[4]  Ravi Kumar,et al.  The role of brass texture on the deformation response of 7075-T651 aluminum alloy under equi-biaxial tension , 2021 .

[5]  Ravi Kumar,et al.  Design and development of a miniaturized multiaxial test setup for in situ x-ray diffraction experiments. , 2021, The Review of scientific instruments.

[6]  Ravi Kumar,et al.  Texture strengthening and anisotropic hardening of mill annealed Ti-6Al-4V alloy under equi-biaxial tension , 2020 .

[7]  H. Kotadia,et al.  Microstructural evolution of 316L austenitic stainless steel during in-situ biaxial deformation and annealing , 2020, Materials Characterization.

[8]  A. K. Kanjarla,et al.  Role of deformation twinning and second phase on the texture evolution in a duplex stainless steel during cold rolling: Experimental and modelling study , 2020 .

[9]  M. Fu,et al.  A modified yield function for modeling of the evolving yielding behavior and micro-mechanism in biaxial deformation of sheet metals , 2020 .

[10]  A. K. Kanjarla,et al.  Crystal Plasticity Study of Heterogeneous Deformation Behavior in γ Matrix Channels during High Temperature Low Stress Creep of Single Crystal Superalloys , 2019, Materials Performance and Characterization.

[11]  J. Čapek,et al.  Microstructure evolution of stainless steel subjected to biaxial load path changes: In-situ neutron diffraction and multi-scale modeling , 2019, International Journal of Plasticity.

[12]  P. Dawson,et al.  Initiation and Propagation of Plastic Yielding in Duplex Stainless Steel , 2017, Metallurgical and Materials Transactions A.

[13]  R. Lebensohn,et al.  Mechanical response of stainless steel subjected to biaxial load path changes: Cruciform experiments and multi-scale modeling , 2018, International Journal of Plasticity.

[14]  H. Van Swygenhoven,et al.  Stresses and Strains in Cruciform Samples Deformed in Tension , 2017, Experimental mechanics.

[15]  Raphaël Pesci,et al.  Local behavior of an AISI 304 stainless steel submitted to in situ biaxial loading in SEM , 2017 .

[16]  R. Lebensohn,et al.  Intergranular Strain Evolution During Biaxial Loading: A Multiscale FE-FFT Approach , 2017, JOM.

[17]  A. Assempour,et al.  Prediction of ideal orientations and lattice rotations of FCC crystals in the equibiaxial tension loading: a rate-dependent crystal plasticity approach , 2016 .

[18]  H. V. Swygenhoven,et al.  Study of lattice strain evolution during biaxial deformation of stainless steel using a finite element and fast Fourier transform based multi-scale approach , 2016 .

[19]  Ravi Kumar,et al.  Deformation behavior of commercially pure (CP) titanium under equi-biaxial tension , 2016 .

[20]  A. Wilkinson,et al.  Assessment of X-ray diffraction and crystal plasticity lattice strain evolutions under biaxial loading , 2016 .

[21]  Tae-Ho Lee,et al.  Evaluation of single crystal elastic constants and stacking fault energy in high-nitrogen duplex stainless steel by in-situ neutron diffraction , 2016 .

[22]  M. Iadicola,et al.  Multiaxial constitutive behavior of an interstitial-free steel: Measurements through X-ray and digital image correlation. , 2016, Acta materialia.

[23]  A. Leacock,et al.  Evolution of mechanical properties in a 7075 Al-alloy subject to natural ageing , 2013 .

[24]  Marion Merklein,et al.  Development of a biaxial tensile machine for characterization of sheet metals , 2013 .

[25]  C. Sinclair,et al.  Biaxial Deformation of the Magnesium Alloy AZ80 , 2013, Metallurgical and Materials Transactions A.

[26]  D. Steglich,et al.  Biaxial deformation behaviour of AZ31 magnesium alloy: Crystal-plasticity-based prediction and experimental validation , 2012 .

[27]  Heung Nam Han,et al.  Microtexture development during equibiaxial tensile deformation in monolithic and dual phase steels , 2011 .

[28]  Meinhard Kuna,et al.  Characterization of stress–strain behavior of a cast TRIP steel under different biaxial planar load ratios , 2011 .

[29]  Helmut Schaeben,et al.  A novel pole figure inversion method: specification of the MTEX algorithm , 2008 .

[30]  Sten Johansson,et al.  Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling , 2008 .

[31]  O. Bouaziz,et al.  Bainite transformation stasis controlled by plastic work in austenite , 2003 .

[32]  Toshihiko Kuwabara,et al.  Measurement and analysis of differential work hardening in cold-rolled steel sheet under biaxial tension , 1998 .

[33]  Y. Zhou,et al.  Influence of f. c. c. rolling textures on biaxial sheet stretching , 1994 .

[34]  L. Anand,et al.  Crystallographic texture evolution in bulk deformation processing of FCC metals , 1992 .

[35]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .

[36]  M. Montagnani,et al.  Dynamic uniaxial and biaxial stress-strain relationships for austenitic stainless steels , 1980 .

[37]  Amit K. Ghosh.  A Criterion for ductile fracture in sheets under biaxial loading , 1976 .