Prediction of Compression Strength of Unidirectional Polymer Matrix Composites

An analytical formulation is developed for the prediction of compression strength of unidirectional polymer matrix composites. The exact solution of the problem is simplified into an explicit equation for compression strength. Then, a nondimensional group is identified and used to propose a simple formula for the prediction of compression strength. The final formula can be used in design or to estimate the compression strength of production parts without performing compression testing. No empirical or semi-empirical parameters are used. The formula is validated for a broad class of materials including a variety of polymer matrices reinforced with carbon and glass fibers. Three parameters are required: the shear stiffness and strength of the composite and the standard deviation of fiber misalignment in the composite. All three parameters can be measured by well-established techniques. Data from the literature is used to validate the formula.

[1]  S. S. Sternstein,et al.  Experiments to Reveal the Role of Matrix Properties and Composite Microstructure in Longitudinal Compression Strength , 1994 .

[2]  Dimitris C. Lagoudas,et al.  Compressive Failure due to Kinking of Fibrous Composites , 1993 .

[3]  E. Barbero,et al.  Predicting High Temperature Ultimate Strength of Continuous Fiber Metal Matrix Composites , 1993 .

[4]  S. W. Yurgartis.  Measurement of small angle fiber misalignments in continuous fiber composites , 1987 .

[5]  E. Barbero,et al.  The effect of fiber damage on the longitudinal creep of a CFMMC , 1993 .

[6]  E. Barbero,et al.  Imperfection sensitivity of fiber microbuckling in elastic-nonlinear polymer-matrix composites , 1997 .

[7]  T. MacRobert.  Higher Transcendental Functions , 1955, Nature.

[8]  Paul S. Steif,et al.  A model for kinking in fiber composites—I. Fiber breakage via micro-buckling , 1990 .

[9]  A. Crasto,et al.  The Effects of Constituent Properties on the Compression Strength of Advanced Composites , 1994 .

[10]  Paul S. Steif,et al.  A model for kinking in fiber composites—II. Kink band formation , 1990 .

[11]  E. Barbero,et al.  A damage mechanics model for compression strength of composites , 1996 .

[12]  Akhilesh Maewal,et al.  Postbuckling behavior of a periodically laminated medium in compression , 1981 .

[13]  Y. Weitsman,et al.  A mechanics model for the compressive response of fiber reinforced composites , 1994 .

[14]  S. Chaterjee,et al.  Test Methods for Composites A Status Report. Volume 3: Shear Test Methods , 1993 .

[15]  Y. Weitsman,et al.  On the buckling/kinking compressive failure of fibrous composites☆ , 1995 .

[16]  Jurgen Haberle,et al.  Strength and failure mechanisms of unidirectional carbon fibre-reinforced plastics under axial compression , 1992 .

[17]  W. Yin.  A new theory of kink band formation , 1992 .

[18]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[19]  Stelios Kyriakides,et al.  On the compressive failure of fiber reinforced composites , 1995 .

[20]  F. L. Matthews,et al.  A Micromechanics Model for Compressive Failure of Unidirectional Fibre-Reinforced Plastics , 1994 .