Molten droplet deposition and solidification at low Weber numbers

Low Weber number deposition of small molten droplets on cold targets is of importance in certain dropwise buildup processes, but at this time, critical elements are absent from our theoretical understanding of the deposition process, and prediction from basic principles is not possible. This paper lays down a framework for understanding low Weber number deposition in terms of similarity laws and experimentation. Based on experiments from the highly viscous limit to the inertia-dominated limit, correlations are given for the spreading velocity, spreading time scales, post-spreading oscillation amplitudes, and oscillation damping time scales. Molten droplets are arrested, and their final solid shape determined, by contact line freezing. In homologous deposition, where the drop and the target are of the same material, the spreading factor is determined principally by the Stefan number, the dimensionless parameter which measures the temperature difference between the fusion point and the target temperature. Some concluding remarks are offered on what needs to be done to accurately compute such deposition processes.

[1]  Ain A. Sonin,et al.  Motion and arrest of a molten contact line on a cold surface: An experimental study , 1997 .

[2]  S. Schiaffino,et al.  On the theory for the arrest of an advancing molten contact line on a cold solid of the same material , 1997 .

[3]  M. Grae Worster,et al.  The case for a dynamic contact angle in containerless solidification , 1996 .

[4]  M. Pasandideh-Fard,et al.  Capillary effects during droplet impact on a solid surface , 1996 .

[5]  S. Schiaffino,et al.  The fundamentals of molten microdrop deposition and solidification , 1996 .

[6]  N. Hatta,et al.  Deformation Process of a Water Droplet Impinging on a Solid Surface , 1995 .

[7]  Ain A. Sonin,et al.  Precise deposition of molten microdrops: the physics of digital microfabrication , 1994, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[8]  F. Gao.  Molten microdrop deposition and solidification processes , 1994 .

[9]  Dimos Poulikakos,et al.  Modeling of the deformation of a liquid droplet impinging upon a flat surface , 1993 .

[10]  M. Rein.  Phenomena of liquid drop impact on solid and liquid surfaces , 1993 .

[11]  P. Gennes.  Wetting: statics and dynamics , 1985 .

[12]  J. Madejski,et al.  Droplets on impact with a solid surface , 1983 .

[13]  V. A. Tatarchenko,et al.  Determination of the growth angle from the shape of a crystal lateral face and solidified separation drops , 1980 .

[14]  L. Tanner,et al.  The spreading of silicone oil drops on horizontal surfaces , 1979 .

[15]  V. Golubev.  Asymptote to the free surface of a viscous liquid creeping on a surface and the velocity dependence of the angle of contact , 1978 .

[16]  J. Madejski,et al.  Solidification in flow through channels and into cavities , 1976 .

[17]  O. Voinov.  Hydrodynamics of wetting , 1976 .

[18]  R. Hoffman.  A study of the advancing interface. I. Interface shape in liquid—gas systems , 1975 .

[19]  W. Macklin,et al.  A theoretical study of the ice accretion process , 1967 .

[20]  S. Chandrasekhar.  Hydrodynamic and Hydromagnetic Stability , 1961 .

[21]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[22]  Albin Henry Warth,et al.  The chemistry and technology of waxes , 1947 .