Two-parameter fracture mechanics in contemporary strength problems

[1]  Yury Matvienko,et al.  Safety factors in structural integrity assessment of components with defects , 2013 .

[2]  Y. Matvienko,et al.  Combining experimental and numerical analysis to estimate stress fields along the surface crack front , 2013 .

[3]  Y. Matvienko,et al.  In‐plane and out‐of‐plane constraint parameters along a three‐dimensional crack‐front stress field under creep loading , 2013 .

[4]  Yu. G. Matvienko,et al.  Maximum Average Tangential Stress Criterion for Prediction of the Crack Path , 2012, International Journal of Fracture.

[5]  Y. Matvienko.  Two approaches to taking nonsingular T-stresses into account in the criteria of fracture mechanics for bodies with notches , 2011 .

[6]  Guy Pluvinage,et al.  Two-parameter fracture criterion (Kρ,c-Tef,c) based on notch fracture mechanics , 2011 .

[7]  G. Pluvinage,et al.  The Effect of Hydrogen on the Master Failure Curve of APL 5L Gas Pipe Steels , 2011 .

[8]  G. Pluvinage,et al.  Corrosion defect assessment on pipes using limit analysis and notch fracture mechanics , 2011 .

[9]  Y. Matvienko.  DEVELOPMENT OF MODELS AND CRITERIA OF NOTCH FRACTURE MECHANICS RAZVOJ MODELA I KRITERIJUMA MEHANIKE LOMA ZAREZA , 2011 .

[10]  J. Yates,et al.  Quantifying crack tip displacement fields with DIC , 2010 .

[11]  G. Pluvinage,et al.  The effective T-stress estimation and crack paths emanating from U-notches , 2010 .

[12]  Yu. G. Matvienko,et al.  Failure Assessment Diagrams in Structural Integrity Analysis , 2009 .

[13]  Yu. G. Matvienko,et al.  Fracture mechanics approaches in the analysis of strains and fractures of bodies with notches and scotches , 2008 .

[14]  Stanislav Seitl,et al.  Two Parameter Fracture Mechanics: Fatigue Crack Behavior under Mixed Mode Condition , 2008, CP 2013.

[15]  A. Nikoobin,et al.  Photoelastic study of a center-cracked plate – The lateral load effects , 2007 .

[16]  V. V. Elksnin,et al.  A technique for evaluating the permissible depth of an extended surface flaw in a pressurized vessel , 2007 .

[17]  Yu. G. Matvienko,et al.  Analysis of permissible dimensions of cracklike defects based on a diagram of crack-growth resistance , 2007 .

[18]  X. Zhu,et al.  Specimen Size Requirements for Two-parameter Fracture Toughness Testing , 2005 .

[19]  Y. J. Chao,et al.  Variation of fracture toughness with constraint , 2003 .

[20]  F. M. Burdekin,et al.  Effects of biaxial loading and residual stresses on constraint , 2003 .

[21]  Wanlin Guo.  Three-dimensional analyses of plastic constraint for through-thickness cracked bodies , 1999 .

[22]  Noel P. O’Dowd,et al.  Constraint in the failure assessment diagram approach for fracture assessment , 1995 .

[23]  Nakamura Toshio,et al.  Determination of elastic T-stress along three-dimensional crack fronts using an interaction integral , 1992 .

[24]  Stanley T. Rolfe,et al.  Effects of crack depth on elastic-plastic fracture toughness , 1991 .

[25]  M. Williams,et al.  On the Stress Distribution at the Base of a Stationary Crack , 1956 .