Boosting Cu2ZnSnS4 solar cells efficiency by a thin Ag intermediate layer between absorber and back contact

In this work, 20 nm Ag is deposited on Mo coated soda lime glass prior to Cu2ZnSnS4 absorber deposition to improve the back contact and therefore enhance solar cell efficiency. This thin coating is found to inhibit the formation of SnS2, MoS2, and other defects especially voids at the back contact; therefore, reduces the series resistance and recombination leading to substantially higher short circuit current density (JSC), fill factor, open circuit voltage (VOC), and efficiency in comparison to the controlled non-coating Mo, though the former results in lower material crystallinity.

[1]  L. Stolt,et al.  Enhanced back reflectance and quantum efficiency in Cu(In,Ga)Se2 thin film solar cells with a ZrN back reflector , 2004 .

[2]  K. Jacob,et al.  Vegard's law: a fundamental relation or an approximation? , 2007 .

[3]  A. Kudo,et al.  Novel Stannite-type Complex Sulfide Photocatalysts AI2-Zn-AIV-S4 (AI = Cu and Ag; AIV = Sn and Ge) for Hydrogen Evolution under Visible-Light Irradiation , 2010 .

[4]  L. Peter,et al.  Towards sustainable photovoltaics: the search for new materials , 2011, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[5]  Marika Edoff,et al.  Chemical Insights into the Instability of Cu2ZnSnS4 Films during Annealing , 2011 .

[6]  Supratik Guha,et al.  The path towards a high-performance solution-processed kesterite solar cell ☆ , 2011 .

[7]  M. Edoff,et al.  Influence of precursor sulfur content on film formation and compositional changes in Cu2ZnSnS4 films and solar cells , 2012 .

[8]  M. Edoff,et al.  A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells. , 2012, Journal of the American Chemical Society.

[9]  Lei Zhang,et al.  Determining factor of MoSe2 formation in Cu(In,Ga)Se2 solar Cells , 2012 .

[10]  Aron Walsh,et al.  Kesterite Thin‐Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4 , 2012 .

[11]  L. Romankiw,et al.  A High Efficiency Electrodeposited Cu2ZnSnS4 Solar Cell , 2012 .

[12]  Supratik Guha,et al.  Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier , 2012 .

[13]  M. Placidi,et al.  On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks , 2013 .

[14]  M. Placidi,et al.  Inhibiting the absorber/Mo-back contact decomposition reaction in Cu2ZnSnSe4 solar cells: the role of a ZnO intermediate nanolayer , 2013 .

[15]  N. Bojarczuk,et al.  On the kinetics of MoSe2 interfacial layer formation in chalcogen-based thin film solar cells with a molybdenum back contact , 2013 .

[16]  W. Warta,et al.  Solar cell efficiency tables (version 43) , 2014 .

[17]  M. Green,et al.  Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol-gel route , 2014 .