Characterisation of TiC–NiMo reinforced Ni-based hardfacing

[1]  I. Hussainova,et al.  Advanced chromium carbide-based hardfacings , 2012 .

[2]  Maksim Antonov,et al.  Effect of temperature and load on three-body abrasion of cermets and steel , 2012 .

[3]  E. Badisch,et al.  Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions , 2011 .

[4]  Z. Liu,et al.  Microstructure of In Situ Tic-Mo-Ni And Tic-WC-Mo-Ni Cermets Synthesized by Reactive Hot-Pressing Sintering , 2011 .

[5]  I. Jasiuk,et al.  Nanoindentation testing and modeling of chromium-carbide-based composites , 2011 .

[6]  F. Sergejev,et al.  Residual Stresses in TiC-based Cermets Measured by Indentation , 2011 .

[7]  M. Roy,et al.  Wear behaviour of hardfaced Fe-Cr-C alloy and austenitic steel under 2-body and 3-body conditions at elevated temperature , 2010 .

[8]  Alexey E. Romanov,et al.  Effect of thermo-elastic residual stresses on erosive performance of cermets with core–rim structured ceramic grains , 2009 .

[9]  G. Fantozzi,et al.  Microstructure and mechanical properties of TiC–TiN based cermets for tools application , 2009 .

[10]  E. Badisch,et al.  Wear Mechanisms at High Temperatures. Part 1: Wear Mechanisms of Different Fe-Based Alloys at Elevated Temperatures , 2009 .

[11]  Petri Vuoristo,et al.  Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding , 2009 .

[12]  Wei Niu,et al.  Laser clad TiC reinforced NiCrBSi composite coatings on Ti–6Al–4V alloy using a CW CO2 laser , 2009 .

[13]  Friedrich Franek,et al.  Behaviour of iron-based hardfacing alloys under abrasion and impact , 2008 .

[14]  M. Gee,et al.  Wear mechanisms in abrasion and erosion of WC/Co and related hardmetals , 2007 .

[15]  Z. Zou,et al.  Fabricating TiC particles reinforced Fe-based composite coatings produced by GTAW multi-layers melting process , 2006 .

[16]  T. Pal,et al.  Solid particle erosion behaviour of hardfacing deposits on cast iron—Influence of deposit microstructure and erodent particles , 2006 .

[17]  B. Mellor.  Surface Coatings for Protection against Wear , 2006 .

[18]  I. Hussainova.  Microstructure and erosive wear in ceramic-based composites , 2005 .

[19]  Jong-ku Park,et al.  Mechanochemical synthesis of nanocomposite powder for ultrafine (Ti, Mo)C-Ni cermet without core-rim structure , 2004 .

[20]  N. Chen,et al.  Fabrication of nickel composite coatings reinforced with TiC particles by laser cladding , 2003 .

[21]  I. Hussainova.  Effect of microstructure on the erosive wear of titanium carbide-based cermets , 2003 .

[22]  Minlin Zhong,et al.  TiC particulate composite coating produced in situ by laser cladding , 2003 .

[23]  I. Reimanis,et al.  Combustion synthesis of TiC–Cr3C2 composites , 2001 .

[24]  Y. Kathuria.  Nd–YAG laser cladding of Cr3C2 and TiC cermets , 2001 .

[25]  J. Kübarsepp,et al.  Behaviour of TiC-base cermets in different wear conditions , 2001 .

[26]  P. Kulu,et al.  Wear resistance of thermal sprayed coatings on the base of recycled hardmetal , 2000 .

[27]  P. Shipway,et al.  Abrasion of mild steel in wet and dry conditions with the rubber and steel wheel abrasion apparatus , 2000 .

[28]  C. Subramanian,et al.  Metal-matrix composite coatings by PTA surfacing , 1998 .

[29]  George M. Pharr,et al.  On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation , 1992 .