Hierarchically porous polyHIPEs fabricated via ex-situ swelling strategy towards supports for noble-metal Ag nanoparticles

[1]  C. Hong,et al.  A robust ethane-selective hypercrosslinked porous organic adsorbent with high ethane capacity , 2022, Journal of Materials Chemistry A.

[2]  Shuoyu Wang,et al.  Preparation and structure tuning of CO2 adsorbent based on in-situ amine-functionalized hierarchical porous polymer , 2021, Microporous and Mesoporous Materials.

[3]  G. Sharma,et al.  Polyquaternium enhances the colloidal stability of chitosan-capped platinum nanoparticles and their antibacterial activity , 2021, Nanotechnology.

[4]  Yun-peng Zhu,et al.  Fabrication of Hierarchical Macroporous ZIF-8 Monoliths Using High Internal Phase Pickering Emulsion Templates. , 2021, Langmuir : the ACS journal of surfaces and colloids.

[5]  Yun-peng Zhu,et al.  Fabrication of emulsion-templated polystyrene absorbent using 4-arm star-shaped poly(ɛ-caprolactone) as property defining crosslinker , 2021 .

[6]  Erdem Yavuz,et al.  Hierarchically Porous High-Surface-Area Polymers with Interconnected Pores for Fast and Selective Albumin Adsorption , 2021 .

[7]  A. Velidandi,et al.  Study of parameters affecting the degradation of rhodamine-B and methyl orange dyes by Annona muricata leaf extract synthesized nanoparticles as well as their recyclability , 2021, Journal of Molecular Structure.

[8]  S. Kovačič,et al.  Highly porous polyelectrolyte beads through multiple-emulsion-templating: Synthesis and organic solvent drying efficiency , 2020 .

[9]  V. Deimede,et al.  Emulsion-templated macroporous ammonium based polymers: Synthesis and dye adsorption study , 2020 .

[10]  Xiaocang Yang,et al.  Fabrication of emulsion-templated macroporous poly(ε-caprolactone) towards highly effective and sustainable oil/water separation , 2020 .

[11]  Q. Guo,et al.  Nanofibrous, porous monoliths formed from gelating high internal phase emulsions using syndiotactic polystyrene , 2020 .

[12]  B. Tan,et al.  Functionalized hierarchical porous polymeric monoliths as versatile platforms to support uniform and ultrafine metal nanoparticles for heterogeneous catalysis , 2020 .

[13]  Yun-peng Zhu,et al.  Macroporous Lithium Adsorbent Monolith Prepared via High Internal Phase Emulsion Technique , 2020 .

[14]  Shiping Zhu,et al.  Engineering bicontinuous polymeric monoliths through high internal phase emulsion templating , 2020 .

[15]  Da In Kim,et al.  Polymer particles with controllable and complex structures for high immobilization of noble-metal nanoparticles , 2020 .

[16]  Xiaomin Zhu,et al.  Multicomponent Radziszewski Emulsion Polymerization toward Macroporous Poly(ionic liquid) Catalysts. , 2020, ACS macro letters.

[17]  Jiajie Fan,et al.  Core-shell Ag@Ni cocatalyst on the TiO2 photocatalyst: One-step photoinduced deposition and its improved H2-evolution activity , 2020 .

[18]  Shengmiao Zhang,et al.  Pickering gel emulsion stabilized by enzyme immobilized polymeric nanoparticles: a robust and recyclable biocatalyst system for biphasic catalysis , 2019, Reaction Chemistry & Engineering.

[19]  M. Silverstein,et al.  Emulsion Templating: Porous Polymers and Beyond , 2019, Macromolecules.

[20]  R. Islam,et al.  Photocatalytic degradation of rhodamine B under UV irradiation using Shorea robusta leaf extract-mediated bio-synthesized silver nanoparticles , 2019, International Journal of Environmental Science and Technology.

[21]  S. Siengchin,et al.  Preparation and characterization studies of modified cellulosic textile fabric composite with in situ-generated AgNPs coating , 2019, Journal of Industrial Textiles.

[22]  S. Kovačič,et al.  Strength versus toughness of emulsion templated Poly(Dicyclopentadiene) foams , 2019, Polymer.

[23]  P. Krajnc,et al.  Novel hypercrosslinking approach toward high surface area functional 2-hydroxyethyl methacrylate-based polyHIPEs , 2018, Reactive and Functional Polymers.

[24]  Yun-peng Zhu,et al.  Synthesis of Emulsion-Templated Magnetic Porous Hydrogel Beads and Their Application for Catalyst of Fenton Reaction. , 2018, Langmuir : the ACS journal of surfaces and colloids.

[25]  Lixi Zeng,et al.  Role of Secondary Particle Formation in the Persistence of Silver Nanoparticles in Humic Acid Containing Water under Light Irradiation. , 2017, Environmental science & technology.

[26]  S. Al‐Thabaiti,et al.  Cationic surfactant assisted morphology of Ag@Cu, and their catalytic reductive degradation of Rhodamine B , 2017 .

[27]  Hui-juan Wang,et al.  Kinetics of the acid orange 7 degradation in the photocatalytic system of UV/H2O2/TS-1 , 2017 .

[28]  Kai Cai,et al.  Pd–Au heterostructured nanonecklaces with adjustable interval and size as a superior catalyst for degradation of 4-nitrophenol , 2017 .

[29]  M. Silverstein.  Emulsion-templated polymers: Contemporary contemplations , 2017 .

[30]  A. Jilani,et al.  Development of Silver-Nanoparticle-Decorated Emulsion-Templated Hierarchically Porous Poly(1-vinylimidazole) Beads for Water Treatment. , 2017, ACS applied materials & interfaces.

[31]  Yun-peng Zhu,et al.  Preparation of polyHIPE via CuAAC ``click'' chemistry and its application as a highly efficient adsorbent of Cu(II) ions , 2017 .

[32]  B. Tan,et al.  Hypercrosslinked porous polymer materials: design, synthesis, and applications. , 2017, Chemical Society reviews.

[33]  J. Košek,et al.  Polystyrene Microstructured Foams Formed by Thermally Induced Phase Separation from Cyclohexanol Solution , 2017 .

[34]  Q. Liu,et al.  In situ formation of AgNPs on S. cerevisiae surface as bionanocomposites for bacteria killing and heavy metal removal , 2017, International Journal of Environmental Science and Technology.

[35]  Jitendra Panwar,et al.  Utilizing metal tolerance potential of soil fungus for efficient synthesis of gold nanoparticles with superior catalytic activity for degradation of rhodamine B. , 2016, Journal of environmental management.

[36]  T. Ahamad,et al.  Chitosan based polymer matrix with silver nanoparticles decorated multiwalled carbon nanotubes for catalytic reduction of 4-nitrophenol. , 2016, Carbohydrate polymers.

[37]  J. Simonin,et al.  On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kinetics , 2016 .

[38]  Yun-peng Zhu,et al.  Macroporous Polymers with Aligned Microporous Walls from Pickering High Internal Phase Emulsions. , 2016, Langmuir : the ACS journal of surfaces and colloids.

[39]  Lingling Xia,et al.  Hierarchical Porous Polystyrene Monoliths from PolyHIPE. , 2015, Macromolecular rapid communications.

[40]  Xiaosong Hu,et al.  Silver‐Based 4A Zeolite Composite Catalyst for Styrene Epoxidation by One‐Pot Hydrothermal Synthesis , 2015 .

[41]  D. Wan,et al.  One-pot synthesis of porous monolith-supported gold nanoparticles as an effective recyclable catalyst , 2015 .

[42]  Huarong Liu,et al.  Tailoring the morphology of emulsion-based (glycidylmethacrylate-divinylbenzene) monoliths , 2014 .

[43]  A. Bismarck,et al.  Polymerised high internal phase emulsions for fluid separation applications , 2014 .

[44]  M. Silverstein.  PolyHIPEs: Recent advances in emulsion-templated porous polymers , 2014 .

[45]  Irena Pulko,et al.  High internal phase emulsion templating--a path to hierarchically porous functional polymers. , 2012, Macromolecular rapid communications.

[46]  S. Shen,et al.  Preparation of TiO2 loaded with crystalline nano Ag by a one-step low-temperature hydrothermal method , 2012 .

[47]  Feng Chen,et al.  Self-assembly between graphene sheets and cationic poly(methyl methacrylate) (PMMA) particles: preparation and characterization of PMMA/graphene composites , 2012, Journal of Nanoparticle Research.

[48]  H. Yıldırım,et al.  Preparation and Characterization of Polyester–Glycidyl Methacrylate PolyHIPE Monoliths to Use in Heavy Metal Removal , 2012 .

[49]  Xuping Sun,et al.  Layer-by-layer self-assembly of multilayer films of polyelectrolyte/Ag nanoparticles for enzymeless hydrogen peroxide detection , 2011 .

[50]  N. Christofi,et al.  Photodegradation of congo red using XeBr, KrCl and Cl2 barrier discharge excilamps: A kinetics study , 2011 .

[51]  W. Wang,et al.  A New Strategy to Microporous Polymers: Knitting Rigid Aromatic Building Blocks by External Cross-Linker , 2011 .

[52]  V. T. Perchyonok,et al.  Streamlining Organic Free Radical Synthesis through Modern Molecular Technology: from Polymer Supported Synthesis to Microreactors and Beyond , 2010 .

[53]  Takuya Tanaka,et al.  A novel approach for preparation of micrometer-sized, monodisperse dimple and hemispherical polystyrene particles. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[54]  Shengmiao Zhang,et al.  PMMA based foams made via surfactant-free high internal phase emulsion templates. , 2009, Chemical communications.

[55]  V. T. Perchyonok,et al.  Stability of high internal phase emulsions with sole cationic surfactant and its tailoring morphology of porous polymers based on the emulsions , 2009 .

[56]  M. Silverstein,et al.  Bicontinuous hydrogel–hydrophobic polymer systems through emulsion templated simultaneous polymerizations , 2008 .

[57]  Megha Mathur,et al.  Removal of the hazardous dye rhodamine B through photocatalytic and adsorption treatments. , 2007, Journal of environmental management.

[58]  M. Okubo,et al.  Preparation and thermodynamic stability of micron-sized, monodisperse composite polymer particles of disc-like shapes by seeded dispersion polymerization. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[59]  Shengmiao Zhang,et al.  Synthesis of open porous emulsion-templated monoliths using cetyltrimethylammonium bromide , 2007 .

[60]  A. Bismarck,et al.  Tough reinforced open porous polymer foams via concentrated emulsion templating , 2006 .

[61]  A. Bismarck,et al.  Tailoring mechanical properties of highly porous polymer foams: Silica particle reinforced polymer foams via emulsion templating , 2006 .

[62]  M. Silverstein,et al.  PolyHIPE: IPNs, hybrids, nanoscale porosity, silica monoliths and ICP-based sensors , 2005 .

[63]  Neil R. Cameron,et al.  High internal phase emulsion templating as a route to well-defined porous polymers , 2005 .

[64]  M. Narkis,et al.  Polymerized high internal phase emulsions containing a porogen: Specific surface area and sorption , 2004 .

[65]  A. Barbetta,et al.  Morphology and Surface Area of Emulsion-Derived (PolyHIPE) Solid Foams Prepared with Oil-Phase Soluble Porogenic Solvents: Span 80 as Surfactant , 2004 .

[66]  B. Su,et al.  Tailoring Pore Size of Ordered Mesoporous Silicas Using One or Two Organic Auxiliaries as Expanders , 2002 .

[67]  A. Barbetta,et al.  The influence of porogen type on the porosity,surface area and morphology of poly(divinylbenzene) PolyHIPE foams , 2000 .

[68]  D. P. Gregory,et al.  Study of the formation of the open-cellular morphology of poly(styrene/divinylbenzene) polyHIPE materials by cryo-SEM , 1996 .

[69]  David C. Sherrington,et al.  Synthesis and ultrastructural studies of styrene-divinylbenzene Polyhipe polymers , 1991 .