Fracture analysis of girth welded pipelines with 3D embedded cracks subjected to biaxial loading conditions

Abstract Steel pipelines used for oil and gas transportation are joined by girth welding and welds may contain weld imperfections/defects such as lack of fusion, under-cuts, porosity, slag inclusion etc. of certain height and length at certain location along the longitudinal direction of the weld. During the installation and operation, these pipelines are exposed to large plastic deformation. Fracture assessment procedures: BS7910:2005 [1] or R6 [2] , are not suitable for such plastic strains (3%). The evolution of crack tip opening displacement (CTOD) of the pipeline with elliptical embedded crack in a girth weld is investigated under biaxial loading conditions using a three dimensional elastic–plastic finite element method. Based on the results, empirical formulas depicting relationship between the CTOD and the global strain are proposed.

[1]  K. Schwalbe,et al.  The Crack Tip Opening Displacement and J Integral Under Strain Control and Fully Plastic Conditions Estimated by the Engineering Treatment Model for Plane Stress Tension , 1994 .

[2]  Erling Østby,et al.  Probabilistic fracture assessment of surface cracked pipes using strain-based approach , 2006 .

[3]  F. M. Burdekin,et al.  Engineering critical analyses to BS 7910 — the UK guide on methods for assessing the acceptability of flaws in metallic structures , 2000 .

[4]  R. McMeeking,et al.  On criteria for J-dominance of crack-tip fields in large-scale yielding , 1979 .

[5]  Rudi Denys,et al.  A Preliminary Strain-Based Design Criterion for Pipeline Girth Welds , 2002 .

[6]  P. J. Budden.  Failure assessment diagram methods for strain-based fracture , 2006 .

[7]  Xiao Zhong-min,et al.  Fracture capacity of girth welded pipelines with 3D surface cracks subjected to biaxial loading conditions , 2012 .

[8]  Pc Paris,et al.  The Theory of Instability of the Tearing Mode of Elastic-Plastic Crack Growth , 1979 .

[9]  J. Rice,et al.  Plane strain deformation near a crack tip in a power-law hardening material , 1967 .

[10]  J. Hutchinson.  Fundamentals of the Phenomenological Theory of Nonlinear Fracture Mechanics , 1983 .

[11]  Robert A. Ainsworth,et al.  Assessment of the integrity of structures containing defects , 1987 .

[12]  John W. Hutchinson,et al.  Singular behaviour at the end of a tensile crack in a hardening material , 1968 .

[13]  Erling Østby,et al.  Fracture response of pipelines subjected to large plastic deformation under tension , 2004 .

[14]  Bjørn Skallerud,et al.  Fracture Control Offshore Pipelines: Advantages of Using Direct Calculations in Fracture Assessments of Pipelines , 2005 .