A novel flexure-based uniaxial force sensor with large range and high resolution

High performance force sensors often encounter the conflicting requirements of high resolution and large measurement range. To address this problem, this paper presents a conceptual design of a novel uniaxial force sensor with large range and dual-stage force resolutions which enables us to measure forces within a wide range with satisfied resolutions. The newly developed force sensor features an aluminum alloy body with a probe to transfer external forces into the sensing element. It employs an optical linear encoder to detect the displacement of the sensing body. This sensing scheme may immunize outside electromagnetic noises and therefore enhance the performance of the sensor thanks to its digital signal output. In this paper, an accurate, analytical model for calculating the static stiffness and dynamics of the system was developed by using pseudo-rigid-body-model (PRBM) methodology. To optimize the design, finite element simulations were conducted. After a prototype sensor was fabricated, preliminary characterization tests were carried out to verify the accuracy of the theoretical model and demonstrate the effectiveness of the design. The experiment results indicate that the structure of the new sensor is compact, and it has the ability to measure both micro range and macro range forces within one setup, meanwhile keeps very fine resolutions.

[1]  Xide Li,et al.  Investigation of loading and force sensing properties of a probe-type microforce sensor with force-distance curves , 2011 .

[2]  Sang-Gook Kim,et al.  Tunable stiffness scanning microscope probe , 2004, SPIE Optics East.

[3]  D. P. Potasek,et al.  Characterizing fruit fly flight behavior using a micro force sensor with a new comb drive configuration , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[4]  Bo Yang,et al.  Triaxial MRI-Compatible Fiber-optic Force Sensor , 2011, IEEE Transactions on Robotics.

[5]  Paul H. Chappell,et al.  A force sensor for automatic manipulation based on the Hall effect , 1993 .

[6]  B. Nelson,et al.  A Six-Axis MEMS Force–Torque Sensor With Micro-Newton and Nano-Newtonmeter Resolution , 2009, Journal of Microelectromechanical Systems.

[7]  Robert J. Wood,et al.  A novel multi-axis force sensor for microrobotics applications , 2009 .

[8]  Larry L. Howell,et al.  Dynamic Modeling of Compliant Mechanisms Based on the Pseudo-Rigid-Body Model , 2005 .

[9]  D. P. Potasek,et al.  Characterizing fruit fly flight behavior using a microforce sensor with a new comb-drive configuration , 2005, Journal of Microelectromechanical Systems.

[10]  W. Xiaomin,et al.  Numerical analysis of capacitive pressure micro-sensors , 2005 .

[11]  Jae Jong Lee,et al.  Passive compliant wafer stage for single-step nano-imprint lithography , 2005 .

[12]  Larry L. Howell,et al.  A Novel Fully Compliant Planar Linear-Motion Mechanism , 2004 .

[13]  Gloria J. Wiens,et al.  MEMS Optical Force Sensor Enhancement Via Compliant Mechanism , 2007 .

[14]  Yulong Zhao,et al.  A three-axial micro-force sensor based on MEMS technology , 2010 .

[15]  Stephanus Büttgenbach,et al.  Simulation, fabrication and characterization of a 3D piezoresistive force sensor , 2008 .

[16]  S.H. Winter,et al.  Use of Magnetorheological Fluid in a Force Feedback Glove , 2007, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[17]  Jun Zhang,et al.  Dynamic characteristics of piezoelectric six-dimensional heavy force/moment sensor for large-load robotic manipulator , 2012 .