Elastostatics of star-polygon tile-based architectured planar lattices

[1]  D. Rodopoulos,et al.  Enhanced Cellular Materials through Multiscale, Variable-Section Inner Designs: Mechanical Attributes and Neural Network Modeling , 2022, Materials.

[2]  Francisco Dos Reis,et al.  Inverse metamaterial design combining genetic algorithms with asymptotic homogenization schemes , 2022, International Journal of Solids and Structures.

[3]  S. Atre,et al.  3D printed tubular lattice metamaterials for mechanically robust stents , 2022, Composites Part B: Engineering.

[4]  A. Huespe,et al.  A topology optimization algorithm based on topological derivative and level-set function for designing phononic crystals , 2021, Engineering Computations.

[5]  A. Gleadall.  FullControl GCode Designer: open-source software for unconstrained design in additive manufacturing , 2021 .

[6]  Y. Estrin,et al.  Architecturing materials at mesoscale: some current trends , 2021, Materials Research Letters.

[7]  S. Fang,et al.  Bounds on the in-plane Poisson's ratios and the in-plane linear and area compressibilities for sheet crystals , 2021, Journal of the Mechanics and Physics of Solids.

[8]  P. Meier,et al.  Structural testing of a shear web attachment point on a composite lattice cylinder for aerospace applications , 2021 .

[9]  A. Huespe,et al.  A microarchitecture design methodology to achieve extreme isotropic elastic properties of composites based on crystal symmetries , 2021, Structural and Multidisciplinary Optimization.

[10]  P. Weaver,et al.  Morphing lattice boom for space applications , 2020 .

[11]  D. Fang,et al.  Compression experiment and numerical evaluation on mechanical responses of the lattice structures with stochastic geometric defects originated from additive-manufacturing , 2020 .

[12]  Jian Song,et al.  3D printing of titanium-coated gradient composite lattices for lightweight mandibular prosthesis , 2020 .

[13]  H. Oraizi,et al.  Reconfigurable honeycomb metamaterial absorber having incident angular stability , 2020, Scientific Reports.

[14]  N. Fleck,et al.  The crack growth resistance of an elastoplastic lattice , 2020, International Journal of Solids and Structures.

[15]  A. Huespe,et al.  Topology design of 2D and 3D elastic material microarchitectures with crystal symmetries displaying isotropic properties close to their theoretical limits , 2020 .

[16]  T. Lubensky,et al.  Multifunctional twisted kagome lattices: Tuning by pruning mechanical metamaterials. , 2020, Physical review. E.

[17]  Huaping Zhao,et al.  Nanoelectrode design from microminiaturized honeycomb monolith with ultrathin and stiff nanoscaffold for high-energy micro-supercapacitors , 2020, Nature Communications.

[18]  Zhichao Dong,et al.  Experimental and numerical studies on the compressive mechanical properties of the metallic auxetic reentrant honeycomb , 2019, Materials & Design.

[19]  T. Tancogne-Dejean,et al.  Stiffness and Strength of Hexachiral Honeycomb-Like Metamaterials , 2019, Journal of Applied Mechanics.

[20]  Hongmei Zhang,et al.  Effect of structural parameters on mechanical properties of Pyramidal Kagome lattice material under impact loading , 2019, International Journal of Impact Engineering.

[21]  S. Bargmann,et al.  Tunable auxeticity and elastomechanical symmetry in a class of very low density core-shell cubic crystals , 2019, Acta Materialia.

[22]  N. Fleck,et al.  Creep failure of honeycombs made by rapid prototyping , 2019, Acta Materialia.

[23]  Rafael N. Alexander,et al.  Computational universality of symmetry-protected topologically ordered cluster phases on 2D Archimedean lattices , 2019, Quantum.

[24]  Zheng-Dong Ma,et al.  Theoretical prediction of mechanical properties of 3D printed Kagome honeycombs and its experimental evaluation , 2019, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[25]  A. Huespe,et al.  Symmetry considerations for topology design in the elastic inverse homogenization problem , 2019, Journal of the Mechanics and Physics of Solids.

[26]  Seunghwa Ryu,et al.  Designing tough isotropic structural composite using computation, 3D printing and testing , 2019, Composites Part B: Engineering.

[27]  N. Fleck,et al.  The role of defects in dictating the strength of brittle honeycombs made by rapid prototyping , 2019, Acta Materialia.

[28]  V. Vitelli,et al.  Dualities and non-Abelian mechanics , 2019, Nature.

[29]  C. Tekoğlu,et al.  2D lattice material architectures for actuation , 2019, Journal of the Mechanics and Physics of Solids.

[30]  Lara A. Ferry,et al.  Classification and Selection of Cellular Materials in Mechanical Design: Engineering and Biomimetic Approaches , 2019, Designs.

[31]  M. Ryvkin,et al.  Damage propagation in 2d beam lattices: 2. Design of an isotropic fault-tolerant lattice , 2019, Archive of Applied Mechanics.

[32]  Lifeng Wang,et al.  Mechanical properties of sandwich composites with 3d-printed auxetic and non-auxetic lattice cores under low velocity impact , 2018, Materials & Design.

[33]  M. Pavier,et al.  Experimental study of modulus, strength and toughness of 2D triangular lattices , 2018, International Journal of Solids and Structures.

[34]  F. D. Reis,et al.  Computing the effective bulk and normal to shear properties of common two-dimensional architectured materials , 2018, Computational Materials Science.

[35]  Guoliang Huang,et al.  A study of topological effects in 1D and 2D mechanical lattices , 2018 .

[36]  S. Bargmann,et al.  Skeletonization-based beam finite element models for stochastic bicontinuous materials: Application to simulations of nanoporous gold , 2018, Journal of Materials Research.

[37]  Zi-Xing Lu,et al.  Yield surfaces of periodic honeycombs with tunable Poisson's ratio , 2018, International Journal of Mechanical Sciences.

[38]  Ruben Gatt,et al.  Mechanical metamaterials with star-shaped pores exhibiting negative and zero Poisson's ratio , 2018 .

[39]  Conner K. Dunn,et al.  Thermomechanically Triggered Two‐Stage Pattern Switching of 2D Lattices for Adaptive Structures , 2018 .

[40]  Jiafu Wang,et al.  Electromagnetic wave absorption and compressive behavior of a three-dimensional metamaterial absorber based on 3D printed honeycomb , 2018, Scientific Reports.

[41]  Yanyu Chen,et al.  Exploiting negative Poisson's ratio to design 3D-printed composites with enhanced mechanical properties , 2018 .

[42]  Xiaoming Mao,et al.  Fracturing of topological Maxwell lattices , 2018, New Journal of Physics.

[43]  Amir A. Zadpoor,et al.  Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials , 2018 .

[44]  N. Fleck,et al.  Tensile response of elastoplastic lattices at finite strain , 2017 .

[45]  C. Tekoğlu,et al.  A quest for 2D lattice materials for actuation , 2017 .

[46]  T. Schaedler,et al.  Architected Cellular Materials , 2016 .

[47]  G. S. Jeong,et al.  Viscoelastic lithography for fabricating self-organizing soft micro-honeycomb structures with ultra-high aspect ratios , 2016, Nature Communications.

[48]  B. Niu,et al.  Directional mechanical properties and wave propagation directionality of Kagome honeycomb structures , 2016 .

[49]  Katia Bertoldi,et al.  Hierarchical honeycomb auxetic metamaterials , 2015, Scientific Reports.

[50]  E. Lu,et al.  Ultralight shape-recovering plate mechanical metamaterials , 2015, Nature Communications.

[51]  Takahiro Shimada,et al.  Hierarchical ferroelectric and ferrotoroidic polarizations coexistent in nano-metamaterials , 2015, Scientific Reports.

[52]  Shu Yang,et al.  Directing the Deformation Paths of Soft Metamaterials with Prescribed Asymmetric Units , 2015, Advanced materials.

[53]  M. Brun,et al.  Auxetic two-dimensional lattices with Poisson's ratio arbitrarily close to −1 , 2014, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[54]  Damiano Pasini,et al.  Non linear constitutive models for lattice materials , 2014 .

[55]  Lin Yang,et al.  Hierarchical lattice composites for electromagnetic and mechanical energy absorptions , 2013 .

[56]  Jongmin Shim,et al.  3D Soft Metamaterials with Negative Poisson's Ratio , 2013, Advanced materials.

[57]  Damiano Pasini,et al.  Mechanical properties of hierarchical lattices , 2013 .

[58]  J. Ganghoffer,et al.  Construction of micropolar continua from the asymptotic homogenization of beam lattices , 2012 .

[59]  R. Lakes,et al.  Poisson's ratio and modern materials , 2011, Nature Materials.

[60]  Damiano Pasini,et al.  Analysis of the elastostatic specific stiffness of 2D stretching-dominated lattice materials , 2010 .

[61]  A. Decelle,et al.  Archimedean lattices in the bound states of wave interacting particles , 2009 .

[62]  D. Fang,et al.  Mechanical Properties of two novel planar lattice structures , 2008 .

[63]  A. Alderson,et al.  Auxetic materials , 2007 .

[64]  N. Fleck,et al.  The structural performance of the periodic truss , 2006 .

[65]  N. Fleck,et al.  Wave propagation in two-dimensional periodic lattices. , 2006, The Journal of the Acoustical Society of America.

[66]  Z. Hou,et al.  The bandgap of a photonic crystal with triangular dielectric rods in a honeycomb lattice , 2005 .

[67]  Tungyang Chen,et al.  Poisson's ratio for anisotropic elastic materials can have no bounds , 2005 .

[68]  Fpt Frank Baaijens,et al.  An approach to micro-macro modeling of heterogeneous materials , 2001 .

[69]  Joseph N. Grima,et al.  Do Zeolites Have Negative Poisson's Ratios? , 2000 .

[70]  K. Evans,et al.  Auxetic Materials : Functional Materials and Structures from Lateral Thinking! , 2000 .

[71]  Georgios E. Stavroulakis,et al.  Negative Poisson's ratios in composites with star-shaped inclusions: a numerical homogenization approach , 1997 .

[72]  K. Evans,et al.  Models for the elastic deformation of honeycombs , 1996 .

[73]  Roderic S. Lakes,et al.  Nonlinear Analysis of the Poisson's Ratio of Negative Poisson's Ratio Foams , 1995 .

[74]  Kenneth E. Evans,et al.  Auxetic polyethylene: The effect of a negative poisson's ratio on hardness , 1994 .

[75]  K. Evans,et al.  Modelling the mechanical properties of an auxetic molecular network , 1994 .

[76]  K. Evans,et al.  Strain-dependent behaviour of microporous polyethylene with a negative Poisson's ratio , 1993, Journal of Materials Science.

[77]  K. E. EVANS,et al.  Molecular network design , 1991, Nature.

[78]  M. Wolcott.  Cellular solids: Structure and properties , 1990 .

[79]  R. Lakes.  Foam Structures with a Negative Poisson's Ratio , 1987, Science.

[80]  Branko Grünbaum,et al.  Tilings by Regular Polygons , 1977 .

[81]  J. A. Rinde,et al.  Poisson's ratio for rigid plastic foams , 1970 .

[82]  Enlai Gao,et al.  Elastic anisotropy measure for two-dimensional crystals , 2020 .

[83]  Panagiotis E. Hadjidoukas,et al.  LatticeMech: A discrete mechanics code to compute the effective static properties of 2D metamaterial structures , 2020, SoftwareX.

[84]  Feng-Ming Li,et al.  Flutter and buckling characteristics and active control of sandwich panels with triangular lattice core in supersonic airflow , 2017 .

[85]  Tim Schmitz,et al.  Mechanics Of Composite Materials , 2016 .

[86]  Michael F. Ashby,et al.  Designing architectured materials , 2013 .

[87]  Joseph N. Grima,et al.  A generalised three-dimensional tethered-nodule model for auxetic materials , 2011 .

[88]  A. Authier,et al.  Physical properties of crystals , 2007 .

[89]  Martin Ostoja-Starzewski,et al.  Lattice models in micromechanics , 2002 .

[90]  A. Alderson.  A triumph of lateral thought , 1999 .

[91]  K E Evans,et al.  Modelling the mechanical properties of an auxetic molecular network , 1994 .

[92]  William Weaver,et al.  Structural dynamics by finite elements , 1987 .

[93]  Oskar Emil Meyer,et al.  Vorlesungen über die Theorie der Elasticität der festen Körper und des Lichtäthers , 1885 .