PV-TEG output: Comparison with heat sink and graphite sheet as heat dissipators
暂无分享,去创建一个
[1] Alajingi RamKumar,et al. Performance improvement of thermoelectric generator by drooping the cool side temperature with thermacool 0.3M coating , 2022, Case Studies in Thermal Engineering.
[2] Daisy Rani Alli,et al. Modelling Thermoelectric Generators to Harvest the Low-Temperature Changes in Electronic Devices , 2022, international journal of engineering trends and technology.
[3] M. Gopinath,et al. A review on solar energy-based indirect water-splitting methods for hydrogen generation , 2022, International Journal of Hydrogen Energy.
[4] H. Abdullah,et al. The Effect of Exterior Wall Color on Thermal Performance of Building , 2022, Tikrit Journal of Engineering Sciences.
[5] Asaad Saber Hamad Ameen,et al. Design and implementation of Evaporative Cooler Automation system at Erbil/Perdawd Power Plant , 2022, Tikrit Journal of Engineering Sciences.
[6] Shawnm Mudhafar Saleh,et al. Effect Of Pooled and Flat Stepped Spillway on Energy Dissipation Using Computational Fluid Dynamics , 2022, Tikrit Journal of Engineering Sciences.
[7] Alajingi RamKumar,et al. A comprehensive review on small-scale thermal energy harvesters: Advancements and applications , 2022, Materials Today: Proceedings.
[8] A. A. Mohammed,et al. An Experimental Investigation on Heat Transfer Enhancement in An Annulus with Rotating Outer Cylinder Using Nano Fluids , 2022, Tikrit Journal of Engineering Sciences.
[9] G. Sui,et al. High Efficiency Thermoelectric Temperature Control System With Improved Proportional Integral Differential Algorithm Using Energy Feedback Technique , 2022, IEEE Transactions on Industrial Electronics.
[10] C. Depcik,et al. Simulink Model of a Thermoelectric Generator for Vehicle Waste Heat Recovery , 2021, Applied Sciences.
[11] K. Prajwal,et al. Thermal analysis of a Thermoelectric Generator (TEG) using FEM technique , 2021 .
[12] F. Basrawi,et al. Multi-objective optimization to enhance the performance of thermo-electric generator combined with heat pipe-heat sink under forced convection , 2020 .
[13] F. Basrawi,et al. Enhancing the performance of a thermo-electric generator through multi-objective optimisation of heat pipes-heat sink under natural convection , 2020 .
[14] H. Tao,et al. The impact of square shape perforations on the enhanced heat transfer from fins: Experimental and numerical study , 2020 .
[15] A. Guizani,et al. Performance investigation of a concentrating photovoltaic thermal hybrid solar system combined with thermoelectric generators , 2020 .
[16] A. Abdalla,et al. Experimental and numerical investigation of heat transfer augmentation in heat sinks using perforation technique , 2019, Applied Thermal Engineering.
[17] Mahmoud Ahmed,et al. Performance evaluation of a new design of concentrator photovoltaic and solar thermoelectric generator hybrid system , 2019, Energy Conversion and Management.
[18] T. Ibrahim,et al. Experimental and numerical study of forced convection heat transfer in different internally ribbed tubes configuration using TiO2 nanofluid , 2019, Heat Transfer-Asian Research.
[19] Qiang Li,et al. Experimental optimization of operating conditions for concentrating photovoltaic-thermoelectric hybrid system , 2019, Journal of Power Sources.
[20] A. Rezania,et al. Experimental and numerical study on the transient behavior of multi-junction solar cell-thermoelectric generator hybrid system , 2019, Energy Conversion and Management.
[21] T. Ibrahim,et al. Performance Enhancement by Using Wet Pad in Vapor Compression Cooling System , 2019, Journal of Engineering and Technological Sciences.
[22] Mehran Ameri,et al. Exergetic advancement of photovoltaic/thermal systems (PV/T): A review , 2018, Renewable and Sustainable Energy Reviews.
[23] Kornelius Nielsch,et al. Thermoelectric Devices: A Review of Devices, Architectures, and Contact Optimization , 2018 .
[24] S. S. Hoseini,et al. Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer , 2018 .
[25] Lasse Rosendahl,et al. Transient Model of Hybrid Concentrated Photovoltaic with Thermoelectric Generator , 2017 .
[26] Youtong Zhang,et al. Modeling and experimental research of hybrid PV-thermoelectric system for high concentrated solar energy conversion , 2017 .
[27] Miqdam T. Chaichan,et al. Photovoltaic/Thermal (PV/T) systems: Status and future prospects , 2017 .
[28] F. J. Willars-Rodríguez,et al. Investigation of solar hybrid system with concentrating Fresnel lens, photovoltaic and thermoelectric generators , 2017 .
[29] Qiang Li,et al. Design of a novel concentrating photovoltaic–thermoelectric system incorporated with phase change materials , 2016 .
[30] H. Goldsmid,et al. Bismuth Telluride and Its Alloys as Materials for Thermoelectric Generation , 2014, Materials.
[31] Georgios Kokogiannakis,et al. Thermal management systems for Photovoltaics (PV) installations: A critical review , 2013 .
[32] Brian Norton,et al. Phase change materials for limiting temperature rise in building integrated photovoltaics , 2006 .
[33] Yulong Zhao,et al. Experimental research of solar thermoelectric generator based on flat heat pipe , 2022, Energy Reports.
[34] V. Mohanavel,et al. Analysing Analyzing the performance of combined solar photovoltaic power system with phase change material , 2022, Energy Reports.
[35] Zhang Heng,et al. Experimental investigation of a novel low concentrating photovoltaic/thermal–thermoelectric generator hybrid system , 2019, Energy.
[36] F. Basrawi,et al. Study on the Performance of a Thermo-Electric Generation Model with Two Different Materials of Heat Pipe-Heat Sink , 2018 .
[37] F. Basrawi,et al. Effect Of Perforation Area On Temperature Distribution Of The Rectangular Fins Under Natural Convection , 2016 .
[38] Siddig Omer,et al. Advancements in hybrid photovoltaic systems for enhanced solar cells performance , 2015 .