Least-weight composite plates with unconventional stacking sequences: Design, analysis and experiments

This study deals with the problem of the least-weight design of a composite multilayer plate subject to constraints of different nature (mechanical, geometrical and technological requirements). To face this problem, a multi-scale two-level design methodology is proposed. This approach aims at optimising simultaneously both geometrical and mechanical parameters of the laminate at each characteristic scale (mesoscopic and macroscopic ones). In this background, at the first level (macroscopic scale), the goal is to find the optimum value of geometrical and mechanical design variables minimising the structure mass and satisfying the set of imposed constraints (on first buckling load, membrane stiffness and feasibility constraints). The second-level problem (mesoscopic scale) aims at finding at least one stacking sequence meeting the geometrical and material parameters provided by the first-level problem. The multi-scale two-level optimisation approach is based on the polar formalism to describe the macroscopic behaviour of the composites (in the framework of the equivalent single-layer theories) and on a special genetic algorithm to perform composite calculations. The optimum solutions provided by the multi-scale two-level optimisation strategy are characterised by a weight saving of about 10% with enhanced mechanical properties when compared to conventional symmetric balanced stacks. The effectiveness of the optimum solutions is also proven through an experimental campaign of buckling tests. The experimental results are in excellent agreement with those foreseen by the numerical simulations.

[1]  Olivier Pironneau,et al.  Variational Analysis and Aerospace Engineering Mathematical Challenges for the Aerospace of the Future , 2016 .

[2]  Marco Montemurro,et al.  A multi-scale approach for the simultaneous shape and material optimisation of sandwich panels with cellular core , 2016 .

[3]  David Bassir,et al.  Multiobjective stacking sequence optimization for laminated composite structures , 2009 .

[4]  J. Gabriel.  The Defense , 2013 .

[5]  Marco Montemurro,et al.  An extension of the polar method to the First-order Shear Deformation Theory of laminates , 2015 .

[6]  R. Haftka,et al.  Improved genetic algorithm for minimum thickness composite laminate design , 1995 .

[7]  Layne T. Watson,et al.  Improved Genetic Algorithm for the Design of Stiffened Composite Panels , 1994 .

[8]  Marco Montemurro,et al.  A General Hybrid Optimization Strategy for Curve Fitting in the Non-uniform Rational Basis Spline Framework , 2017, Journal of Optimization Theory and Applications.

[9]  Yao Koutsawa,et al.  A two-level procedure for the global optimization of the damping behavior of composite laminated plates with elastomer patches , 2015 .

[10]  P. Trovalusci,et al.  A Statistically-Based Homogenization Approach for Particle Random Composites as Micropolar Continua , 2016 .

[11]  H. Altenbach,et al.  Generalized Continua as Models for Classical and Advanced Materials , 2016 .

[12]  Marco Montemurro,et al.  Corrigendum to "An extension of the polar method to the First-order Shear Deformation Theory of laminates" [Compos. Struct. 127 (2015) 328-339] , 2015 .

[13]  Tim Schmitz,et al.  Mechanics Of Composite Materials , 2016 .

[14]  Yao Koutsawa,et al.  Design of damping properties of hybrid laminates through a global optimisation strategy , 2012 .

[15]  Paolo Vannucci,et al.  Plane Anisotropy by the Polar Method* , 2005 .

[16]  Marco Montemurro,et al.  The polar analysis of the Third-order Shear Deformation Theory of laminates , 2015 .

[17]  P. Trovalusci,et al.  Sensitivity to material contrast in homogenization of random particle composites as micropolar continua , 2018 .

[18]  Mark Walker,et al.  Optimal laminate configurations with symmetric lay-ups for maximum postbuckling stiffness , 1994 .

[19]  Akira Todoroki,et al.  Stacking sequence optimization by a genetic algorithm with a new recessive gene like repair strategy , 1998 .

[20]  D. Roylance.  INTRODUCTION TO COMPOSITE MATERIALS , 2000 .

[21]  Sarp Adali,et al.  Optimal design of hybrid laminates with discrete ply angles for maximum buckling load and minimum cost , 1995 .

[22]  Yao Koutsawa,et al.  Identification of electromechanical properties of piezoelectric structures through evolutionary optimisation techniques , 2012 .

[23]  Marco Montemurro,et al.  Optimal design of advanced engineering modular systems through a new genetic approach , 2012 .

[24]  R. Haftka,et al.  Optimization of laminate stacking sequence for buckling load maximization by genetic algorithm , 1993 .

[25]  Mark Walker,et al.  Multiobjective optimization of laminated plates for maximum prebuckling, buckling and postbuckling strength using continuous and discrete ply angles , 1996 .

[26]  Marco Montemurro,et al.  A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part II: the optimisation strategy , 2014 .

[27]  Sarp Adali,et al.  Optimization of laminated composites subject to uncertain buckling loads , 2003 .

[28]  Marco Montemurro,et al.  A general B-Spline surfaces theoretical framework for optimisation of variable angle-tow laminates , 2019, Composite Structures.

[29]  J. L. Walsh,et al.  Stacking-Sequence Optimization for Buckling of Laminated Plates by Integer Programming , 1991 .

[30]  N. J. Pagano,et al.  INVARIANT PROPERTIES OF COMPOSITE MATERIALS. , 1968 .

[31]  Raphael T. Haftka,et al.  Maximization of buckling loads of composite panels using flexural lamination parameters , 2004 .

[32]  Francesco Aymerich,et al.  Optimization of laminate stacking sequence for maximum buckling load using the ant colony optimization (ACO)metaheuristic , 2008 .

[33]  Marco Montemurro,et al.  On the effective integration of manufacturability constraints within the multi-scale methodology for designing variable angle-tow laminates , 2017 .

[34]  Marco Montemurro,et al.  A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part I: homogenisation of core properties , 2014 .

[35]  G. Verchery,et al.  Les Invariants des Tenseurs d’Ordre 4 du Type de l’Élasticité , 1982 .

[36]  Paul M. Weaver,et al.  Optimisation of Anisotropic Composite Plates Incorporating Non-Conventional Ply Orientations , 2008 .

[37]  Marco Montemurro,et al.  A contribution to the development of design strategies for the optimisation of lightweight structures , 2018 .

[38]  Marco Montemurro,et al.  Design of the elastic properties of laminates with a minimum number of plies , 2012, Mechanics of Composite Materials.

[39]  Paolo Vannucci,et al.  A special class of uncoupled and quasi-homogeneous laminates , 2001 .

[40]  Paolo Vannucci,et al.  A Note on the Elastic and Geometric Bounds for Composite Laminates , 2013 .

[41]  Marco Montemurro,et al.  A new paradigm for the optimum design of variable angle tow laminates , 2016 .

[42]  C. G. Diaconu,et al.  Layup optimization of symmetrically laminated thick plates for fundamental frequencies using lamination parameters , 2002 .

[43]  Hideki Sekine,et al.  Feasible region in general design space of lamination parameters for laminated composites , 2002 .

[44]  Marco Montemurro,et al.  The Automatic Dynamic Penalisation method (ADP) for handling constraints with genetic algorithms , 2013 .

[45]  R. Luciano,et al.  A multiscale damage analysis of periodic composites using a couple-stress/Cauchy multidomain model: Application to masonry structures , 2018 .

[46]  Yongcun Zhang,et al.  A two-step optimization scheme for maximum stiffness design of laminated plates based on lamination parameters , 2012 .

[47]  J. Boehler,et al.  Mechanical Behavior of Anisotropic Solids / Comportment Méchanique des Solides Anisotropes , 1982 .