A WEIGHTED THREE-POINT-BASED STRATEGY FOR VARIANCE ESTIMATION

In manufacturing processes, it is widely accepted that uncertainty plays an important role and should be taken into account during analysis and design processes. However, uncertainty quantification of its effects on an end-product is a very challenging task, especially when an expensive computational effort is already needed in deterministic models such as sheet metal forming simulations. In this paper, we focus our work on the variance estimation of the system response. A weighted three-point-based strategy is proposed to efficiently and effectively estimate the variance of the system response. Three first-order derivatives for each variable are used to estimate the nonlinear behavior and variance of the system. The details of the derivation of the approach are presented in the paper. The optimal locations of the three points along each axis in the standard normal space and weights for input variables following normal distributions are proposed as (-1.8257,0.0,+1.8257) and (0.075,0.850,0.075), respectively. For input variables following uniform distributions U(-1,1), the optimal locations and weights are proposed as (-0.84517, 0.0,+0.84517) and (0.04667,0.90666,0.04667), respectively. The proposed approach is applicable to nonlinear and multivariable systems as well as problems having no explicit function such as those design simulations based on finite element methods. The significant accuracy improvement over the traditional first-order approximation is demonstrated with a number of test problems. The proposed method requires significantly less computational effort compared with the Monte Carlo simulations. Discussions and conclusions of this work are given at the end of the paper.

[1]  Daniel D. Frey,et al.  Key Inspection Characteristics , 2001 .

[2]  Anna C. Thornton.  Quantitative selection of variation reduction plans , 2000 .

[3]  R. J. Yang,et al.  Recent Applications on Reliability-Based Optimization of Automotive Structures , 2003 .

[4]  Wei Chen,et al.  Towards a Better Understanding of Modeling Feasibility Robustness in Engineering Design , 2000 .

[5]  P. J. Campion,et al.  Error and Uncertainty , 1973 .

[6]  Vincent Braibant,et al.  Nondeterministic "Possibilistic" Approaches for Structural Analysis and Optimal Design , 1999 .

[7]  Wing Kam Liu,et al.  Random field finite elements , 1986 .

[8]  Wei Chen,et al.  ROBUST CONCEPT EXPLORATION OF PROPULSION SYSTEMS WITH ENHANCED MODEL APPROXIMATION CAPABILITIES , 2000 .

[9]  I. Elishakoff,et al.  Antioptimization of structures with large uncertain-but-non-random parameters via interval analysis , 1998 .

[10]  Sheldon M. Ross,et al.  Introduction to probability models , 1975 .

[11]  Ted Belytschko,et al.  Variational approach to probabilistic finite elements , 1988 .

[12]  Thaweepat Buranathiti,et al.  An effective analytical model for springback prediction in straight flanging processes , 2004 .

[13]  Ramana V. Grandhi,et al.  Improved two-point function approximations for design optimization , 1995 .

[14]  Wei Chen,et al.  A Most Probable Point-Based Method for Efficient Uncertainty Analysis , 2001 .

[15]  Xiaoping Du,et al.  Efficient Uncertainty Analysis Methods for Multidisciplinary Robust Design , 2002 .

[16]  David Draper,et al.  Assessment and Propagation of Model Uncertainty , 2011 .

[17]  Ian D. Howarth,et al.  Towards a better understanding , 2003 .

[18]  Jian Cao,et al.  Analysis of an axisymmetric deep-drawn part forming using reduced forming steps , 2001 .

[19]  Wei Chen,et al.  Model Validation via Uncertainty Propagation Using Response Surface Models , 2002, Volume 2: 28th Design Automation Conference.

[20]  Adrian P. Butler,et al.  A comparison between Monte Carlo and first-order approximation methods in capture zone design , 2003 .

[21]  Kathleen V. Diegert,et al.  Error and uncertainty in modeling and simulation , 2002, Reliab. Eng. Syst. Saf..

[22]  Taylan Altan,et al.  The use of FEA and design of experiments to establish design guidelines for simple hydroformed parts , 2000 .

[23]  Averill M. Law,et al.  Simulation Modeling and Analysis , 1982 .

[24]  Yan-Gang Zhao,et al.  A general procedure for first/second-order reliabilitymethod (FORM/SORM) , 1999 .

[25]  R. Ghanem,et al.  Stochastic Finite Elements: A Spectral Approach , 1990 .

[26]  Xiaoping Du,et al.  A MOST PROBABLE POINT BASED METHOD FOR UNCERTAINTY ANALYSIS , 2000 .

[27]  Sheldon M. Ross,et al.  Introduction to probability models , 1975 .

[28]  Kwon-Hee Lee,et al.  Robust optimization considering tolerances of design variables , 2001 .

[29]  Shigeru Nakagiri,et al.  Finite element interval analysis of external loads identified by displacement input with uncertainty , 1999 .

[30]  Thaweepat Buranathiti,et al.  An approach for model validation in simulating sheet metal flanging processes , 2002 .