Enhanced numerical model of performance of an encapsulated three-phase transformer in laboratory environment

The paper presents a numerical thermal model of an encapsulated three-phase electrical transformer. This model is based on the coupled approach and involves a heat transfer analysis coupled with the examination of the specific power losses within the coils and the core, determined from a detailed analysis of the electromagnetic field. The thermal boundary conditions, i.e. local heat fluxes, are determined by considering a numerical model of the surrounding air. Additionally, the device is cooled via forced convection (water cooling system) and radiation (from the external walls). Moreover, for stranded coils and the core, anisotropic material properties were assumed. Results of the presented coupled analysis show that the temperature distribution within the transformer is more realistic and closer to the measurements when compared to the previous analysis limited to heat transfer problems with uniform internal heat sources and isotropic material properties only. The total heat transfer rate indicates that forced convection is the most important heat dissipation mechanism in this model.

[1]  Eric Van den Bulck,et al.  Modelling of the mixed convection in the windings of a disc-type power transformer , 2000 .

[2]  K. Preis,et al.  On the use of the magnetic vector potential in the finite-element analysis of three-dimensional eddy currents , 1989 .

[3]  Jacek Smolka,et al.  Numerical modelling of thermal processes in an electrical transformer dipped into polymerised resin by using commercial CFD package fluent , 2004 .

[4]  Eric Van den Bulck,et al.  Modelling of the mass flow distribution around an array of rectangular blocks in-line arranged and simulating the cross-section of a winding disc-type transformer , 2001 .

[5]  Leroy S. Fletcher,et al.  Effective thermal conductivity in multidimensional bodies , 1994 .

[6]  G. Swift,et al.  A fundamental approach to transformer thermal modeling. I. Theory and equivalent circuit , 2001 .

[7]  Stefanos Kollias,et al.  A novel iron loss reduction technique for distribution transformers based on a combined genetic algorithm - neural network approach , 2001 .

[8]  Ho-Myung Chang,et al.  Cryogenic cooling system of HTS transformers by natural convection of subcooled liquid nitrogen , 2003 .

[9]  A. Basak,et al.  Efficient transformer design by computing core loss using a novel approach , 1994 .

[10]  M. Ozisik.  Heat Transfer: A Basic Approach , 1984 .

[11]  R. D. De Doncker,et al.  Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[12]  Charles R. Sullivan,et al.  Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters , 2002, 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings..

[13]  S. Maksimovic,et al.  Non-stationary thermal model of indoor transformer stations , 2002 .

[14]  Sylvain Pelletier,et al.  Effect of electrical resistivity on core losses in soft magnetic iron powder materials , 1997 .

[15]  Gilberto Espinosa-Paredes,et al.  A thermal study of an encapsulated electrical transformer , 2002, Comput. Electr. Eng..

[16]  K. Preis,et al.  Thermal-electromagnetic coupling in the finite-element simulation of power transformers , 2006, IEEE Transactions on Magnetics.

[17]  Narendra S. Goel,et al.  A simple model for heat conduction in heterogeneous materials and irregular boundaries , 1992 .

[18]  M. Poloujadoff,et al.  A contribution to the modeling of three phase transformers using reluctances , 1996 .

[19]  Risto Mikkonen,et al.  Effective thermal conductivity in HTS coils , 2000 .

[20]  J. Anderson,et al.  Computational fluid dynamics : the basics with applications , 1995 .

[21]  K. Preis,et al.  FEM analysis of eddy current losses in nonlinear laminated iron cores , 2005, IEEE Transactions on Magnetics.

[22]  G. Olivier,et al.  3-D computation of transformers overheating under nonlinear loads , 2005, IEEE Transactions on Magnetics.

[23]  E. Snelling.  Soft ferrites: properties and applications , 1969 .

[24]  Scott J. Ormiston,et al.  THEORETICAL DETERMINATION OF ANISOTROPIC EFFECTIVE THERMAL CONDUCTIVITY IN TRANSFORMER WINDINGS , 2003 .

[25]  N. Narayana Rao,et al.  Elements of engineering electromagnetics , 1977 .