Bidirectional flyback inverter with low output voltage THD

This paper develops a single-phase voltage source inverter mainly containing a high frequency flyback bidirectional DC-DC converter - as a previous stage, and a full-bridge module. The flyback bidirectional converter generates a rectified sinusoidal voltage waveform across the output capacitor. The full bridge transistors switch two times in one AC period in order to transform the output capacitor voltage in an AC waveform. The converter ensures also galvanic insulation between input and output, and a possible high conversion voltage ratio given by transformer. A state-space averaging model for the proposed converter was used for stability analysis and to design a tracking controller for output capacitor voltage. Digital simulations validate inverter proper operations and a low output voltage THD value.

[1]  Juri Jatskevich,et al.  Circuit-averaged and state-space-averaged-value modeling of second-order flyback converter in CCM and DCM including conduction losses , 2013, 4th International Conference on Power Engineering, Energy and Electrical Drives.

[2]  Tore Undeland,et al.  Power Electronics: Converters, Applications and Design , 1989 .

[3]  Felipe S. F. e Silva,et al.  Bidirectional DC-AC converter for isolated microgrids with voltage unbalance reduction capabilities , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[4]  E. Gubia,et al.  Boost DC-AC inverter: a new control strategy , 2005, IEEE Transactions on Power Electronics.

[5]  K. Muhammedali Shafeeque,et al.  PV fed flyback DC-AC inverter with MPPT control , 2014, 2014 Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD).

[6]  K. Muhammedali Shafeeque,et al.  PV fed flyback DC-AC inverter with MPPT control , 2014 .

[7]  Nicolae Muntean,et al.  Novel Topology Flyback Inverter for a Microgrid System , 2014, SOFA.

[8]  Seddik Bacha,et al.  Classical Averaged Model , 2014 .

[9]  Seddik Bacha,et al.  Power Electronic Converters Modeling and Control: with Case Studies , 2013 .

[10]  Akshay Kumar Rathore,et al.  Small-Signal Modeling of Active-Clamped ZVS Current-Fed Full-Bridge Isolated DC/DC Converter and Control System Implementation Using PSoC , 2014, IEEE Transactions on Industrial Electronics.

[11]  Christophe Basso,et al.  Switch-Mode Power Supplies Spice Simulations and Practical Designs , 2008 .

[12]  Michael Evzelman,et al.  Simulation of Hybrid Converters by Average Models , 2014, IEEE Transactions on Industry Applications.

[13]  W. Marsden.  I and J , 2012 .

[14]  Quan Li,et al.  A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies With Three Different DC Link Configurations , 2008, IEEE Transactions on Power Electronics.

[15]  Hossin Hosseinian,et al.  Power Electronics , 2020, 2020 27th International Conference on Mixed Design of Integrated Circuits and System (MIXDES).

[16]  F. Blaabjerg,et al.  A review of single-phase grid-connected inverters for photovoltaic modules , 2005, IEEE Transactions on Industry Applications.

[17]  A.M. Salamah,et al.  Single-Phase Voltage Source Inverter With a Bidirectional Buck–Boost Stage for Harmonic Injection and Distributed Generation , 2009, IEEE Transactions on Power Electronics.

[18]  Elhassane Abdelmounim,et al.  The Performance comparative of Backstepping, Sliding Mode and PID controllers designed for a single-phase inverter UPS , 2014, 2014 International Conference on Multimedia Computing and Systems (ICMCS).