Study of a dipping method for flip-chip flux coating

A dipping method for flux coating is proposed in the paper. Flow process of the flux transferred into the groove is investigated by using an optical detection means. Flow process influenced by gluing speed and viscosity is analyzed by using two indicators including reflective area ratio and flow velocity. Experimental result shows that stably reflective area ratio of glue is associated with gluing speed instead of viscosity; and it decreases with the increase of gluing speed in a same viscosity. The reason is that different gluing speed changes the amount of the glue transferred to the groove. Flow velocity of glue is related with gluing speed, a greater gluing speed leads to greater maximum flow velocity at the same viscosity, which may be due to larger gluing speed gives greater inertial force to the glue. Real chip experiments verified the feasibility of this method.

[1]  Jun Yu Li,et al.  Design of Data Acquisition System Based on LabVIEW , 2012 .

[2]  Xiaolu Yang,et al.  An Improved Median-based Otsu Image Thresholding Algorithm , 2012 .

[3]  Lianghai Jin,et al.  Characteristic analysis of Otsu threshold and its applications , 2011, Pattern Recognit. Lett..

[4]  Raj N. Master,et al.  Novel jet fluxing application for advanced flip chip and BGA/CGA packages , 2000, 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070).

[5]  Jun Yu Li,et al.  Research of Multi-Axes Motion Control System Based on LabVIEW Platform , 2012 .

[6]  Zhonghua Lin,et al.  The Pupil Location Based on the OTSU Method and Hough Transform , 2011 .

[7]  K. Srihari,et al.  Fluxing for flip chip assembly - effect of bump damage , 2001, Advances in Electronic Materials and Packaging 2001 (Cat. No.01EX506).

[8]  Amir Nejat,et al.  A Newton–Krylov finite volume algorithm for the power-law non-Newtonian fluid flow using pseudo-compressibility technique , 2011 .

[9]  Junhui Li,et al.  Microstructural characteristics of Au/Al bonded interfaces , 2007 .

[10]  Wen-Hao Lee,et al.  Flux study for ultra fine pitch flip chip packages , 2009, 2009 4th International Microsystems, Packaging, Assembly and Circuits Technology Conference.

[11]  D. Crowley,et al.  Next generation electronics packaging utilizing flip chip technology , 2003, IEEE/CPMT/SEMI 28th International Electronics Manufacturing Technology Symposium, 2003. IEMT 2003..

[12]  Chongyoup Kim,et al.  Spreading of Boger fluid on horizontal surface , 2013 .

[13]  W. T. Chen,et al.  An investigation into the effects of flux residues on properties of underfill materials for flip chip packages , 2003 .

[14]  Luhua Deng,et al.  Interfacial Microstructures and Thermodynamics of Thermosonic Cu-Wire Bonding , 2011, IEEE Electron Device Letters.