论文信息 - Distributed feedback control for redundant manipulators based on virtual arms

Distributed feedback control for redundant manipulators based on virtual arms

A distributed feedback control for redundant manipulators based on virtual arms is proposed. The virtual arm has the same kinematic structure as the manipulator except that its end-point is located on the joint or link of the manipulator. Therefore, the configuration of the redundant manipulator can be represented as a set of virtual arms. Dynamic behavior of each subsystem is based on an end-point feedback control of the virtual arm on the operational space. Position control of the manipulator utilizing kinematic redundancy can be realized through cooperative and competitive interactions between subsystems, and the dynamic behavior of the whole system is always stable. The advantages of the method are discussed.<<ETX>>

Toshio Tsuji | Koji Ito | Seiya Nakayama

[1] Miomir Vukobratovic,et al. A dynamic approach to nominal trajectory synthesis for redundant manipulators , 1984, IEEE Transactions on Systems, Man, and Cybernetics.

[2] Tsuneo Yoshikawa,et al. Analysis and Control of Robot Manipulators with Redundancy , 1983 .

[3] Toshio Tsuji,et al. A Hierarchical Collision-Free Path Planning for Redundant Manipulators Based on Virtual Arms , 1990, Proceedings of the IEEE International Workshop on Intelligent Motion Control.

[4] M Potkonjak,et al. Two new methods for computer forming of dynamic equations of active mechanisms , 1979 .

[5] John M. Hollerbach,et al. Redundancy resolution of manipulators through torque optimization , 1987, IEEE J. Robotics Autom..

[6] Suguru Arimoto,et al. A New Feedback Method for Dynamic Control of Manipulators , 1981 .

[7] Sukhan Lee,et al. Robot kinematic control based on bidirectional mapping neural network , 1990, 1990 IJCNN International Joint Conference on Neural Networks.