The maximum pulse current estimation for the lithium-ion battery

Accurate information regarding the maximum available pulse current can help to determine the power capability of the battery and allow the battery to be operated within the safe operating voltage range. However, although estimation methods of the maximum available pulse current have been developed, they have the drawback of variation in the resistance inside the batteries. In this paper, the state of charge (SOC) and resistance of the battery are estimated from the dual extended Kalman filter (dual EKF). Furthermore, the lumped resistance, which represents the impedance inside the battery during the predefined time, is calculated using an easy numerical calculation based on the estimated values.

[1]  Ali Emadi,et al.  Electrical Modeling of Renewable Energy Sources and Energy Storage Devices , 2004 .

[2]  B.H. Cho,et al.  The State and Parameter Estimation of an Li-Ion Battery Using a New OCV-SOC Concept , 2007, 2007 IEEE Power Electronics Specialists Conference.

[3]  Eberhard Meissner,et al.  Battery Monitoring and Electrical Energy Management , 2003 .

[4]  Stephen W. Moore,et al.  2001-01-0959 A Review of Cell Equalization Methods for Lithium Ion and Lithium Polymer Battery Systems , 2001 .

[5]  Gregory L. Plett,et al.  High-performance battery-pack power estimation using a dynamic cell model , 2004, IEEE Transactions on Vehicular Technology.

[6]  Georg Brasseur,et al.  Modeling of high power automotive batteries by the use of an automated test system , 2003, IEEE Trans. Instrum. Meas..

[7]  S. Haykin.  Kalman Filtering and Neural Networks , 2001 .

[8]  Georg Brasseur,et al.  Modelling of high power automotive batteries by the use of an automated test system , 2002, IMTC/2002. Proceedings of the 19th IEEE Instrumentation and Measurement Technology Conference (IEEE Cat. No.00CH37276).

[9]  Suleiman Abu-Sharkh,et al.  Rapid test and non-linear model characterisation of solid-state lithium-ion batteries , 2004 .

[10]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 2. Modeling and identification , 2004 .

[11]  Rik W. De Doncker,et al.  Impedance-based non-linear dynamic battery modeling for automotive applications , 2003 .

[12]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 3. State and parameter estimation , 2004 .