Strain-based health monitoring and remaining life prediction of large caliber gun barrel

[1]  Bin Wu,et al.  Preparation of the projectile rotating band and its performance evaluation , 2016 .

[2]  Jiri Balla,et al.  Technical Diagnostics of Tank Cannon Smooth Barrel Bore and Ramming Device , 2015 .

[3]  Hwa-Yaw Tam,et al.  Fiber laser sensor for simultaneously axial strain and transverse load detection , 2015 .

[4]  Bin Wu,et al.  Tribology of rotating band and gun barrel during engraving process under quasi-static and dynamic loading , 2014 .

[5]  Bin Wu,et al.  Friction and wear between rotating band and gun barrel during engraving process , 2014 .

[6]  Taha Landolsi,et al.  Monitoring of strain induced by heat of hydration, cyclic and dynamic loads in concrete structures using fiber-optics sensors , 2014 .

[7]  Bin Wu,et al.  Fabricating Aluminum Bronze Rotating Band for Large-Caliber Projectiles by High Velocity Arc Spraying , 2014, Journal of Thermal Spray Technology.

[8]  Heikki Remes,et al.  Strain-based approach to fatigue crack initiation and propagation in welded steel joints with arbitrary notch shape , 2013 .

[9]  Masayuki Kamaya,et al.  Strain-based modeling of fatigue crack growth – An experimental approach for stainless steel , 2012 .

[10]  Heikki Keinänen,et al.  Influence of Rotating Band Construction on Gun Tube Loading: Part II: Measurement and Analysis , 2012 .

[11]  Zhi Zhou,et al.  Development and sensing properties study of FRP–FBG smart stay cable for bridge health monitoring applications , 2011 .

[12]  Yong Xiang Zhao,et al.  The framework for a strain-based fatigue reliability analysis , 2008 .

[13]  Nae-Ho Shin,et al.  Prediction of erosion from heat transfer measurements of 40 mm gun tubes , 2007 .

[14]  A. Sherman,et al.  Rhenium as a Hard Chrome Replacement for Gun Tubes , 2006 .

[15]  Tony D. Andrews,et al.  Projectile Driving Band Interactions With Gun Barrels , 2006 .

[16]  John H. Underwood,et al.  Thermomechanically controlled erosion in army cannons : A review , 2006 .

[17]  M. Perl,et al.  An Experimental-Numerical Determination of the Three-Dimensional Autofrettage Residual Stress Field Incorporating Bauschinger Effects , 2006 .

[18]  Anthony P. Parker,et al.  Stresses within compound tubes comprising a steel liner and an external carbon-fiber wrapped laminate , 2005 .

[19]  John H. Underwood,et al.  Critical fracture processes in army cannons: A review , 2003 .

[20]  M. Perl,et al.  Erosions and Their Effect on the Fatigue Life of Thick Walled, Autofrettaged, Pressurized Vessels , 2003 .

[21]  Myoungho Oh,et al.  New empirical method to enhance the accuracy in the erosion prediction of cannon tube , 2003 .

[22]  B. Lawton,et al.  The Influence of Additives on the Temperature, Heat Transfer, Wear, Fatigue Life, and Self Ignition Characteristics of a 155 mm Gun , 2003 .

[23]  Anthony P. Parker,et al.  Residual Stresses and Lifetimes of Tubes Subjected to Shrink Fit Prior to Autofrettage , 2003 .

[24]  B. Lawton,et al.  Thermo-chemical erosion in gun barrels , 2001 .

[25]  Dean W. Matson,et al.  Properties of thick sputtered Ta used for protective gun tube coatings , 2001 .

[26]  Paul J. Cote,et al.  Gas–metal reaction products in the erosion of chromium-plated gun bores , 2000 .

[27]  Suk-Hyun Nam,et al.  A study on the precision wear measurement for a high friction and high pressurized gun barrel by using a diamond indenter , 1999 .

[28]  R. S. Montgomery,et al.  Muzzle wear of cannon , 1975 .

[29]  R. A. Mahdavinejad,et al.  Prediction of cannon barrel life , 2008 .

[30]  Samuel Sopok,et al.  Thermal-chemical-mechanical gun bore erosion of an advanced artillery system part one: theories and mechanisms , 2005 .

[31]  Samuel Sopok,et al.  Thermal–chemical–mechanical gun bore erosion of an advanced artillery system part two: modeling and predictions , 2005 .

[32]  Jan Ming Ko,et al.  Fatigue analysis and life prediction of bridges with structural health monitoring data — Part II: application , 2001 .

[33]  Jan Ming Ko,et al.  Fatigue analysis and life prediction of bridges with structural health monitoring data — Part I: methodology and strategy , 2001 .

[34]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .