Interaction between optical fibre sensors and matrix cracks in cross-ply GRP laminates—part 1: passive optical fibres

Abstract The obtrusivity of a passive optical fibre embedded in the 0° ply of a model cross-ply GRP laminate has been investigated experimentally and theoretically. The experimental results show that for quasi-static loading and cyclic loads with a peak strain greater than the quasi-static cracking threshold, both the initiation and development of matrix cracks are insensitive to the presence of the optical fibre. However, for cyclic loading with a peak strain just below the cracking threshold, the matrix crack-growth rate is reduced significantly in the vicinity of the optical fibre. The reduction in the crack-growth rate can be understood in terms of a reduction in the strain-energy release rate for cracking as a consequence of the local stiffening of the 0° ply due to the presence of the optical fibre.

[1]  Ronald C. Averill,et al.  Optimization of Fiber Coatings to Minimize Stress Concentrations in Composite Materials , 1993 .

[2]  G. Carman,et al.  Optimization of Fiber Coatings for Transverse Performance: An Experimental Study , 1994 .

[3]  John A. Nairn,et al.  The Strain Energy Release Rate of Composite Microcracking: A Variational Approach , 1989 .

[4]  A. Dasgupta,et al.  Importance of coatings to optical fiber sensors embedded in smart structures , 1992 .

[5]  Isaac M Daniel,et al.  Progressive Transverse Cracking of Crossply Composite Laminates , 1990 .

[6]  G. Carman,et al.  Analytical Optimization of Coating Properties for Actuators and Sensors , 1993 .

[7]  L. McCartney Stress transfer mechanics for ply cracks in general symmetric laminates. , 1996 .

[8]  M. G. Bader,et al.  Transverse Ply Cracking in Cross-Ply CFRP Laminates—Initiation or Propagation Controlled? , 1997 .

[9]  Roger Davidson,et al.  Mechanical properties of composite materials containing embedded fiber-optic sensors , 1991, Other Conferences.

[10]  G. Reed,et al.  Optimization of fibre coating properties for fiber optic smart structures , 1996 .

[11]  Graham T. Reed,et al.  Optimisation of the coating of a fibre optical sensor embedded in a cross-ply GFRP laminate , 2002 .

[12]  J. Tong,et al.  On matrix crack growth in quasi-isotropic laminates—I. Experimental investigation , 1997 .

[13]  Effect of embedded optical fibers on the interlaminar fracture toughness of composite laminates , 1997 .

[14]  P. Smith,et al.  Intra-laminar fracture in angle-ply laminates , 1997 .

[15]  P. Smith,et al.  Strain energy release rates and the fatigue growth of matrix cracks in model arrays in composite laminates , 1991, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[16]  L. Crocker Mixed mode intra-laminar fracture in glass/epoxy laminates , 1998 .