Laser induced removal of spherical particles from silicon wafers

Laser-induced removal of spherical silica particles from silicon wafers was investigated. The cleaning efficiency and laser cleaning thresholds for particles with diameters of 0.5, 1.0, 2.5, and 5.0 μm were carefully measured. It is found that the cleaning efficiency is more sensitive to laser fluence than laser pulse number and repetition frequency. The particle ejecting energies were found to increase with laser fluence. The threshold laser fluences for removing particles with sizes of 0.5 and 1.0 μm are 225 and 100 mJ/cm2, respectively, when KrF excimer laser is used. The threshold laser fluences are only a value below 5.0 mJ/cm2 for particles with a size of 2.5 and 5 μm. A model including both linear expansion and elastic deformation model was proposed to explain the experimental results. With this model, the particle movement and deformation in laser cleaning process were calculated. The expressions for threshold laser fluences were derived. The theoretical predictions are found to be greater than the experimental results. The difference can be explained by the enhancement of light intensity near the contacting area, due to the focusing and scattering by spherical particles. This model is useful to the study of laser cleaning as well as particle adhesion and deformation on solid surfaces.

[1]  B. Derjaguin,et al.  General theoretical consideration of the influence of surface forces on contact deformations and the reciprocal adhesion of elastic spherical particles , 1983 .

[2]  S. Allen,et al.  Shock wave analysis of laser assisted particle removal , 1993 .

[3]  B. Derjaguin,et al.  On the influence of molecular forces on the deformation of an elastic sphere and its sticking to a rigid plane , 1980 .

[4]  R. Larciprete,et al.  Excimer laser cleaning of Si(100) surfaces at 193 and 248 nm studied by LEED, AES and XPS spectroscopies , 1995 .

[5]  A. N. Jette,et al.  Modeling of pulsed‐laser cleaning of metal optical surfaces at cryogenic temperatures , 1994 .

[6]  M. Kerker,et al.  Distribution of absorption centers within irradiated spheres , 1979 .

[7]  K. Mittal,et al.  Particles on Surfaces 1 , 1989 .

[8]  Floyd E. Hovis,et al.  Removal of small particles from surfaces by pulsed laser irradiation: observations and a mechanism , 1991, Photonics West - Lasers and Applications in Science and Engineering.

[9]  Z. Kam,et al.  Absorption and Scattering of Light by Small Particles , 1998 .

[10]  J. D. Kelley,et al.  A thermal detachment mechanism for particle removal from surfaces by pulsed laser irradiation , 1993 .

[11]  Werner Zapka,et al.  Laser‐cleaning techniques for removal of surface particulates , 1992 .

[12]  P. Leung,et al.  Photodeflection probing of the explosion of a liquid film in contact with a solid heated by pulsed excimer laser irradiation , 1993 .

[13]  William H. Press,et al.  The Art of Scientific Computing Second Edition , 1998 .

[14]  R. Larciprete,et al.  KrF-excimer-laser-induced native oxide removal from Si (100) surfaces studied by Auger electron spectroscopy , 1996 .

[15]  J. P. Barton,et al.  Internal and near‐surface electromagnetic fields for a spherical particle irradiated by a focused laser beam , 1988 .

[16]  Yongfeng Lu,et al.  Laser removal of particles from magnetic head sliders , 1996 .

[17]  T. Chong,et al.  Mechanism of and method to avoid discoloration of stainless steel surfaces in laser cleaning , 1997 .

[18]  K. Dishman,et al.  Comparison of particle size of cracking catalyst determined by laser light scattering and dry sieve methods , 1993 .

[19]  J. Longwell,et al.  Photophoresis of irradiated spheres: absorption centers , 1985 .

[20]  B. V. Derjaguin,et al.  Effect of contact deformations on the adhesion of particles , 1975 .

[21]  A. Kolomenskiǐ,et al.  Interaction of laser-generated surface acoustic pulses with fine particles: Surface cleaning and adhesion studies , 1998 .

[22]  A. C. Tam,et al.  A practical excimer laser-based cleaning tool for removal of surface contaminants , 1994 .