Coplanar propagation paths of 3D cracks in infinite bodies loaded in shear

Abstract Bower and Ortiz, recently followed by Lazarus, developed a powerful method, based on a theoretical work of Rice, for numerical simulation of planar propagation paths of mode 1 cracks in infinite isotropic elastic bodies. The efficiency of this method arose from the need for the sole 1D meshing of the crack front. This paper presents an extension of Rice’s theoretical work and the associated numerical scheme to mixed-mode (2 + 3) shear loadings. Propagation is supposed to be channeled along some weak planar layer and to remain therefore coplanar, as in the case of a geological fault for instance. The capabilities of the method are illustrated by computing the propagation paths of cracks with various initial contours (circular, elliptic, rectangular, heart-shaped) in both fatigue and brittle fracture. The crack quickly reaches a stable, almost elliptic shape in all cases. An approximate but accurate analytic formula for the ratio of the axes of this stable shape is derived.

[1]  J. Rice,et al.  Some remarks on elastic crack-tip stress fields , 1972 .

[2]  Michael Ortiz,et al.  A three-dimensional analysis of crack trapping and bridging by tough particles , 1991 .

[3]  N. Fares.  Crack Fronts Trapped by Arrays of Obstacles: Numerical Solutions Based on Surface Integral Representation , 1989 .

[4]  D. F. Hays,et al.  Table of Integrals, Series, and Products , 1966 .

[5]  Michael Ortiz,et al.  A variational boundary integral method for the analysis of 3‐D cracks of arbitrary geometry modelled as continuous distributions of dislocation loops , 1993 .

[6]  Véronique Lazarus,et al.  Brittle fracture and fatigue propagation paths of 3D plane cracks under uniform remote tensile loading , 2003 .

[7]  K. Hwang,et al.  The boundary-layer effect on the crack tip field in mechanism-based strain gradient plasticity , 2001 .

[8]  Huajian Gao,et al.  Nearly Circular Connections of Elastic Half Spaces , 1987 .

[9]  Huajian Gao,et al.  Shear Stress Intensity Factors for a Planar Crack With Slightly Curved Front , 1986 .

[10]  T. Belytschko,et al.  Non‐planar 3D crack growth by the extended finite element and level sets—Part II: Level set update , 2002 .

[11]  M. Ortiz,et al.  An Analysis of Crack Trapping by Residual Stresses in Brittle Solids , 1993 .

[12]  Michael Ortiz,et al.  An analysis of non-planar crack growth under mixed mode loading , 1994 .

[13]  A.Yu. Popov,et al.  Forced oscillations in imperfect and statically loaded shells , 1986 .

[14]  John R. Rice,et al.  Weight Function Theory for Three-Dimensional Elastic Crack Analysis , 1989 .

[15]  I. S. Gradshteyn,et al.  Table of Integrals, Series, and Products , 1976 .

[16]  Hiroshi Tada,et al.  The stress analysis of cracks handbook , 2000 .

[17]  James R. Rice,et al.  First-Order Variation in Elastic Fields Due to Variation in Location of a Planar Crack Front , 1985 .

[18]  V. Lazarus,et al.  Crack paths in three-dimensional elastic solids. II: three-term expansion of the stress intensity factors: applications and perspectives , 1999 .

[19]  Michael Ortiz,et al.  Solution of three-dimensional crack problems by a finite perturbation method , 1990 .

[20]  Huajian Gao,et al.  Nearly circular shear mode cracks , 1988 .

[21]  D. Chopp,et al.  Extended finite element method and fast marching method for three-dimensional fatigue crack propagation , 2003 .

[22]  H. Bueckner.  NOVEL PRINCIPLE FOR THE COMPUTATION OF STRESS INTENSITY FACTORS , 1970 .

[23]  Richard P. Gangloff,et al.  Fracture Mechanics: Perspectives and Directions (Twentieth Symposium) , 1989 .

[24]  T. Belytschko,et al.  Non‐planar 3D crack growth by the extended finite element and level sets—Part I: Mechanical model , 2002 .

[25]  M. K. Kassir,et al.  Three-Dimensional Stress Distribution Around an Elliptical Crack Under Arbitrary Loadings , 1966 .

[26]  H. Bueckner,et al.  Weight functions and fundamental fields for the penny-shaped and the half-plane crack in three-space , 1987 .