Low-temperature oxide-free silicon and germanium wafer bonding based on a sputtered amorphous Ge

We report a potential low-cost method for low-temperature silicon (Si) and germanium (Ge) wafer bonding based on an intermediate amorphous Ge (a-Ge). The sputtered a-Ge is demonstrated to be extremely flat (RMS = ∼0.28 nm) and hydrophilic (contact angle = ∼3°). The a-Ge turns to be the polycrystalline phase at the Si/Ge/Si bonded interface, whereas it fully turns to be single-crystal phase at the Ge/Ge/Si bonded interface after annealing. The simulated stress distribution reveals that the maximum thermal stress in a-Ge dominates the crystallization process and the crystalline phase of the intermediate Ge layer depends on the induction of seed crystals. More importantly, the threading dislocation and oxide layer are not observed at the bonded interface. This finding may be applied to fabricate high-performance Si-based Ge photoelectric devices.

[1]  H. Moriceau,et al.  Water Stress Corrosion in Bonded Structures , 2015 .

[2]  O. Nakatsuka,et al.  Characterization of bonding structures of directly bonded hybrid crystal orientation substrates , 2008 .

[3]  J. Campbell,et al.  Thermal desorption of Ge native oxides and the loss of Ge from the surface , 2004 .

[4]  Brian Corbett,et al.  Characterization of germanium/silicon p–n junction fabricated by low temperature direct wafer bonding and layer exfoliation , 2012 .

[5]  M. Koyanagi,et al.  Surface tension-driven chip self-assembly with load-free hydrogen fluoride-assisted direct bonding at room temperature for three-dimensional integrated circuits , 2010 .

[6]  M. Taniwaki,et al.  Analysis of a wafer bonded Ge /Si heterojunction by transmission electron microscopy , 2007 .

[7]  I. Ferain,et al.  Low temperature germanium to silicon direct wafer bonding using free radical exposure , 2010 .

[8]  Harold Gamble,et al.  Thin film sputtered silicon for silicon wafer bonding applications , 2003 .

[9]  Toshio Ogino,et al.  Oxidation of Ge(100) and Ge(111) surfaces: an UPS and XPS study , 1995 .

[10]  F. C. Marques,et al.  Coefficient of thermal expansion and elastic modulus of thin films , 1999 .

[11]  Akira Sakai,et al.  Mechanical Properties and Chemical Reactions at the Directly Bonded Si–Si Interface , 2009 .

[12]  T. Suni,et al.  Effects of Plasma Activation on Hydrophilic Bonding of Si and SiO2 , 2002 .

[13]  Werner Schrenk,et al.  High power terahertz quantum cascade lasers with symmetric wafer bonded active regions , 2013 .

[14]  Manfred Reiche,et al.  Hydrophobic silicon wafer bonding , 1994 .

[15]  M. Taniwaki,et al.  Crystallographic Properties of Ge/Si Heterojunctions Fabricated by Wet Wafer Bonding , 2010 .

[16]  R. Soref,et al.  Si/Ge junctions formed by nanomembrane bonding. , 2011, ACS nano.

[17]  Ian Appelbaum,et al.  Electronic measurement and control of spin transport in silicon , 2007, Nature.

[18]  Ryutaro Maeda,et al.  Surface activated bonding of silicon wafers at room temperature , 1996 .

[19]  Ryutaro Maeda,et al.  Wafer-scale spontaneous bonding of silicon wafers by argon-beam surface activation at room temperature , 2003 .

[20]  Moon J. Kim,et al.  Sequential Plasma Activated Process for Silicon Direct Bonding , 2006 .

[21]  Tadatomo Suga,et al.  Investigation of fluorine containing plasma activation for room-temperature bonding of Si-based materials , 2012, Microelectron. Reliab..

[22]  R. Maeda,et al.  Room-temperature microfluidics packaging using sequential plasma activation process , 2006, IEEE Transactions on Advanced Packaging.

[23]  Low-temperature hydrophobic silicon wafer bonding , 2003 .

[24]  Naoteru Shigekawa,et al.  Electrical properties of Si/Si interfaces by using surface-activated bonding , 2013 .

[25]  Ge/Si Heterojunction Photodiodes Fabricated by Low Temperature Wafer Bonding , 2008 .