Active Gate Control for Current Balancing of Parallel-Connected IGBT Modules in Solid-State Modulators

In modern pulsed power systems, often, fast solid-state switches like MOSFETs and insulated gate bipolar transistor (IGBT) modules are used to generate short high power pulses. In order to increase the pulsed power, solid-state switches have to be connected in series or in parallel. Depending on the interconnection of the switches, parameter variations in the switches and in the system can lead to an unbalanced voltage or current. Therefore, the switches are generally derated, which results in an increased number of required devices, cost, and volume. With an active gate control, derating and preselection of the switching devices can be avoided. In this paper, an active gate control of paralleled IGBT modules, which has been developed for converters with inductive load, is explained in detail and adapted to a solid-state modulator. This paper focuses on achieving a low-inductance IGBT current measurement, the control unit implementation with a field-programmable gate array and a digital signal processor, as well as the balancing of the pulse currents.

[1]  A. Chattock.  IX. On a magnetic potentiometer , 1887 .

[2]  A. Chattock.  On a Magnetic Potentiometer , 1887 .

[3]  W. Rogowski,et al.  Die Messung der magnetischen Spannung , 1912 .

[4]  Tore Undeland,et al.  Power Electronics: Converters, Applications and Design , 1989 .

[5]  James Rulison,et al.  An alternative low-cost current-sensing scheme for high-current power electronics circuits , 1990 .

[6]  D. A. Ward,et al.  Using Rogowski coils for transient current measurements , 1993 .

[7]  W. F. Ray,et al.  Rogowski transducers for high bandwidth high current measurement , 1994 .

[8]  G. Torri,et al.  Large power voltage source IGBT inverters for industrial application , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[9]  P. Hofer,et al.  Paralleling intelligent IGBT power modules with active gate-controlled current balancing , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[10]  François Costa,et al.  Wide bandwidth, large AC current probe for power electronics and EMI measurements , 1997, IEEE Trans. Ind. Electron..

[11]  Patrick Hofer,et al.  Parallelschaltung von Leistungshalbleitern mit steuerseitig geregelter Stromverteilung , 1997 .

[12]  P. Hofer-Noser,et al.  Monitoring of paralleled IGBT/diode modules , 1999 .

[13]  P. Hofer-Noser,et al.  A new current measuring principle for power electronic applications , 1999, 11th International Symposium on Power Semiconductor Devices and ICs. ISPSD'99 Proceedings (Cat. No.99CH36312).

[14]  W. F. Ray,et al.  High performance Rogowski current transducers , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[15]  N. Karrer,et al.  PCB Rogowski coils for high di/dt current measurement , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[16]  W. F. Ray,et al.  Rogowski transducers for measuring large magnitude short duration pulses , 2000 .

[17]  Nicolas Karrer.  Hochdynamische Erfassung elektrischer Ströme über stossfrei verkoppelte Wandler , 2002 .

[18]  J.D. van Wyk,et al.  An overview of integratable current sensor technologies , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[19]  C.R. Hewson,et al.  Verification of Rogowski current transducer's ability to measure fast switching transients , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..