Integration of Topology Optimisation and Design Variants Selection for Additive Manufacturing-Based Systematic Product Redesign

[1]  Philip Tack,et al.  3D-printing techniques in a medical setting: a systematic literature review , 2016, BioMedical Engineering OnLine.

[2]  Suphunnika Ibbotson,et al.  Direct digital manufacturing: definition, evolution, and sustainability implications , 2015 .

[3]  K. C. Desai.  Factors Influencing Success of Metal to Plastic Conversion Programs for Under-hood Applications , 1996 .

[4]  Charlie C. L. Wang,et al.  Current and future trends in topology optimization for additive manufacturing , 2018 .

[5]  Pouyan Ahangar,et al.  Current Biomedical Applications of 3D Printing and Additive Manufacturing , 2019, Applied Sciences.

[6]  Francesco Leali,et al.  A Methodological Approach for the Design of Inclusive Assistive Devices by Integrating Co-design and Additive Manufacturing Technologies , 2020, IHSI.

[7]  A. Brandão,et al.  Additive layer manufacturing of poly (ether ether ketone) via FDM , 2018, Composites Part B: Engineering.

[8]  Brad E Dicianno,et al.  Innovations With 3‐Dimensional Printing in Physical Medicine and Rehabilitation: A Review of the Literature , 2016, PM & R : the journal of injury, function, and rehabilitation.

[9]  C. Badini,et al.  Mechanical and Thermal Behavior of Ultem® 9085 Fabricated by Fused-Deposition Modeling , 2020 .

[10]  Francesco Leali,et al.  Integrated CAD platform approach for Design for Additive Manufacturing of high performance automotive components , 2020, International Journal on Interactive Design and Manufacturing (IJIDeM).

[11]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[12]  J. Plocher,et al.  Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures , 2019 .

[13]  Christian Lindemann,et al.  Towards a sustainable and economic selection of part candidates for additive manufacturing , 2015 .

[14]  C. Broeckhoven,et al.  Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing , 2019, Additive Manufacturing.

[15]  Thomas Vietor,et al.  A new methodological framework for design for additive manufacturing , 2016 .

[16]  Anton Wiberg,et al.  Design for additive manufacturing – a review of available design methods and software , 2019, Rapid Prototyping Journal.

[17]  Francesco Leali,et al.  Assessment of Design for Additive Manufacturing Based on CAD Platforms , 2019, Lecture Notes in Mechanical Engineering.

[18]  Michele Germani,et al.  A multi-objective sequential method for manufacturing cost and structural optimization of modular steel towers , 2019, Engineering with Computers.

[19]  Francesco Leali,et al.  A Co-Design Method for the Additive Manufacturing of Customised Assistive Devices for Hand Pathologies , 2019, J. Integr. Des. Process. Sci..

[20]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .