A fully-integrated charge pump for self-powered implantable retinal prostheses

This paper presents a compact fully-integrated charge pump based voltage doubler for self-powered implantable retinal prostheses. The target input voltage is 0.55 V to meet the output voltage of on-chip photovoltaic cells, and the target output is around 1 V to provide sufficient current for neuron stimulation. Several techniques are adopted in the proposed design, including gate-boosting circuits to enhance current driving capability, a time-interleaving technique to reduce the size of the output capacitor, and a non-overlapping clock generator to suppress the shoot-through current. The proposed charge pump was implemented in 0.18 μm CMOS process with core chip area of 700 μm × 280 μm. The measurement results demonstrate that the proposed charge pump is capable of providing around 1 V output from an input voltage of 0.55 V with 500 μA loading current. The peak power efficiency is 73.4 % and the total area is 700 μm × 280 μm.

[1]  Chung-Yu Wu,et al.  The design of CMOS self-powered 256-pixel implantable chip with on-chip photovoltaic cells and active pixel sensors for subretinal prostheses , 2015, 2015 IEEE Biomedical Circuits and Systems Conference (BioCAS).

[2]  Yi-Chun Shih,et al.  An Inductorless DC–DC Converter for Energy Harvesting With a 1.2-$ \mu\hbox{W}$ Bandgap-Referenced Output Controller , 2011, IEEE Transactions on Circuits and Systems II: Express Briefs.

[3]  Chih-Cheng Hsieh,et al.  A 0.8-V 4096-Pixel CMOS Sense-and-Stimulus Imager for Retinal Prosthesis , 2013, IEEE Transactions on Electron Devices.

[4]  Zhihua Wang,et al.  Ultra-low-voltage low-power charge pump for solar energy harvesting systems , 2009, 2009 International Conference on Communications, Circuits and Systems.