An Analytical Solution for Non-Linear Viscoelastic Impact

The paper presents an analytical solution for the centric viscoelastic impact of two smooth balls. The contact period has two phases, compression and restitution, delimited by the moment corresponding to maximum deformation. The motion of the system is described by a nonlinear Hunt–Crossley equation that, when compared to the linear model, presents the advantage of a hysteresis loop closing in origin. There is only a single available equation obtained from the theorem of momentum. In order to solve the problem, in the literature, there are accepted different supplementary hypotheses based on energy considerations. In the present paper, the differential equation is written under a convenient form; it is shown that it can be integrated and a first integral is found—this being the main asset of the work. Then, all impact parameters can be calculated. The effect of coefficient of restitution upon all collision characteristics is emphasized, presenting importance for the compliant materials, in the domain of small coefficients of restitution. The results (variations of approach, velocity, force vs. time and hysteresis loop) are compared to two models due to Lankarani and Flores. For quasi-elastic collisions, the results are practically the same for the three models. For smaller values of the coefficient of restitution, the results of the present paper are in good agreement only to the Flores model. The simplified algorithm for the calculus of viscoelastic impact parameters is also presented. This algorithm avoids the large calculus volume required by solving the transcendental equations and definite integrals present in the mathematical model. The method proposed, based on the viscoelastic model given by Hunt and Crossley, can be extended to the elasto–visco–plastic nonlinear impact model.

[1]  Paulo Flores,et al.  Contact Force Models for Multibody Dynamics , 2016 .

[2]  S. Djerassi Collision with friction; Part A: Newton’s hypothesis , 2009 .

[3]  Method of Integration for Equation of Two Balls in Dumped Collision , 2015 .

[4]  Hamid M. Lankarani,et al.  Treatment of Impact with Friction in Planar Multibody Mechanical Systems , 2001 .

[5]  Michal Feckan,et al.  Averaging Methods for Second-Order Differential Equations and Their Application for Impact Systems , 2020, Mathematics.

[6]  J. Keller Impact With Friction , 1986 .

[7]  H. Deresiewicz A note on Hertz's theory of impact , 1968 .

[8]  Ferdinand Freudenstein,et al.  Dynamic Analysis of Mechanical Systems With Clearances—Part 2: Dynamic Response , 1971 .

[9]  Palmieri,et al.  On the Evaluation of Surface Fatigue Strength of a Stainless-Steel Aeronautical Component , 2019, Metals.

[10]  R. Kačianauskas,et al.  Improvement of Viscoelastic Damping for the Hertz Contact of Particles Due to Impact Velocity , 2017 .

[11]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[12]  S. Heinrich,et al.  The normal and oblique impact of three types of wet granules , 2011 .

[13]  Bin Chen,et al.  The Painlevé paradox studied at a 3D slender rod , 2008 .

[14]  Comment: collision with friction; part B: Poisson’s and Stronge’s hypotheses , 2010 .

[15]  E. J. Routh Dynamics of a System of Rigid Bodies , 2016 .

[16]  J. Wittenburg,et al.  Dynamics of systems of rigid bodies , 1977 .

[17]  G. Hu,et al.  A normal contact force approach for viscoelastic spheres of the same material , 2019, Powder Technology.

[18]  F. Pfeiffer,et al.  Multiple impacts with friction in rigid multibody systems , 1995 .

[19]  Robert J. Rogers,et al.  An Experimental Study of Contact Forces During Oblique Elastic Impact , 2009 .

[20]  W. Goldsmith,et al.  Plate impact and perforation by projectiles , 1965 .

[21]  Shlomo Djerassi Collision with friction; Part B: Poisson’s and Stornge’s hypotheses , 2008 .

[22]  Holly O. Witteman,et al.  Modeling of Impact Dynamics: A Literature Survey , 2000 .

[23]  K. H. Hunt,et al.  Coefficient of Restitution Interpreted as Damping in Vibroimpact , 1975 .

[24]  R. Brach,et al.  Mechanical Impact Dynamics: Rigid Body Collisions , 1991 .

[25]  C. S. Koshy,et al.  Study of the effect of contact force model on the dynamic response of mechanical systems with dry clearance joints: computational and experimental approaches , 2013 .

[26]  Jorge Alberto Cadete Ambrosio Elastic-plastic large deformation of flexible multibody systems in crash analysis. , 1991 .

[27]  金海,et al.  Impact model resolution on Painlevé's paradox , 2004 .

[28]  H. Lankarani,et al.  A comparative study of the viscoelastic constitutive models for frictionless contact interfaces in solids , 2015 .

[29]  M. T. Mason,et al.  Two-Dimensional Rigid-Body Collisions With Friction , 1992 .

[30]  L. Wan,et al.  Contact Response Analysis of Vertical Impact between Elastic Sphere and Elastic Half Space , 2018, Shock and Vibration.

[31]  F. Pfeiffer,et al.  Dynamical systems with unilateral contacts , 1992 .

[32]  Ferdinand Freudenstein,et al.  Dynamic Analysis of Mechanical Systems With Clearances—Part 1: Formation of Dynamic Model , 1971 .

[33]  B. Brogliato,et al.  Frictionless multiple impacts in multibody systems. II. Numerical algorithm and simulation results , 2008, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[34]  W. Stronge GENERALIZED IMPULSE AND MOMENTUM APPLIED TO MULTIBODY IMPACT WITH FRICTION* , 2001 .

[35]  J. Awrejcewicz,et al.  Bifurcation phenomena and statistical regularities in dynamics of forced impacting oscillator , 2019, Nonlinear Dynamics.

[36]  Hamid M. Lankarani,et al.  A Contact Force Model With Hysteresis Damping for Impact Analysis of Multibody Systems , 1989 .

[37]  Stefan Heinrich,et al.  Energy absorption during compression and impact of dry elastic-plastic spherical granules , 2010 .

[38]  J. Ambrósio,et al.  Dynamic Analysis for Planar Multibody Mechanical Systems with Lubricated Joints , 2004 .

[39]  Jan Awrejcewicz,et al.  Properties of impact events in the model of forced impacting oscillator: Experimental and numerical investigations , 2019, International Journal of Non-Linear Mechanics.

[40]  H. Lankarani,et al.  Spatial rigid-multibody systems with lubricated spherical clearance joints: modeling and simulation , 2010 .

[41]  I. Argatov Mathematical modeling of linear viscoelastic impact: Application to drop impact testing of articular cartilage , 2012, 1206.2681.

[42]  B. Brogliato,et al.  Frictionless multiple impacts in multibody systems. I. Theoretical framework , 2008 .

[43]  William James Stronge Friction in collisions : resolution of a paradox , 1991 .

[44]  R. Brach Rigid Body Collisions , 1989 .

[45]  Margarida F. Machado,et al.  On the continuous contact force models for soft materials in multibody dynamics , 2011 .

[46]  Jorge Ambrósio,et al.  On the contact detection for contact-impact analysis in multibody systems , 2010 .

[47]  Rajendra Singh,et al.  Estimation of impact damping parameters for a cam–follower system based on measurements and analytical model , 2016 .

[48]  W. Stronge Rigid body collisions with friction , 1990, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[49]  Daisuke Nishiura,et al.  Development of Viscoelastic Multi-Body Simulation and Impact Response Analysis of a Ballasted Railway Track under Cyclic Loading , 2017, Materials.

[50]  Yin-Tien Wang,et al.  Dynamics of rigid bodies undergoing multiple frictional contacts , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.