Magnetic Model Self-Identification for PM Synchronous Machine Drives

The magnetic model self-identification of PM synchronous machines is proposed and experimentally validated. Provided that the shaft is free to turn, the commissioning procedure consists of spinning the machine to positive and negative speed values by way of an appropriate pattern of $dq$ current reference values. The flux linkage versus current curves of the machine are constructed during the test via the standard measurements available on any industrial drive: phase currents, dc-link voltage, and shaft position. With respect to the literature, the proposed method does not require a specific test rig nor offline mathematical manipulation.

[1]  Peter J. Savagian,et al.  Design and Performance of Electrical Propulsion System of Extended Range Electric Vehicle (EREV) Chevrolet Volt , 2015, IEEE Transactions on Industry Applications.

[2]  Robert D. Lorenz,et al.  High frequency injection-based stator flux linkage and torque estimation for DB-DTFC implementation on IPMSMs considering cross-saturation effects , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[3]  Z. Q. Zhu,et al.  Investigation of Effectiveness of Sensorless Operation in Carrier-Signal-Injection-Based Sensorless-Control Methods , 2011, IEEE Transactions on Industrial Electronics.

[4]  G Pellegrino,et al.  Accurate Inverter Error Compensation and Related Self-Commissioning Scheme in Sensorless Induction Motor Drives , 2010, IEEE Transactions on Industry Applications.

[5]  P. Garcia,et al.  Measurement and Adaptive Decoupling of Cross-Saturation Effects and Secondary Saliencies in Sensorless-Controlled IPM Synchronous Machines , 2007, 2007 IEEE Industry Applications Annual Meeting.

[6]  G. Pellegrino,et al.  Direct Flux Field-Oriented Control of IPM Drives With Variable DC Link in the Field-Weakening Region , 2009, IEEE Transactions on Industry Applications.

[7]  F. Blaabjerg,et al.  “Active Flux” DTFC-SVM Sensorless Control of IPMSM , 2009, IEEE Transactions on Energy Conversion.

[8]  M. Trlep,et al.  Evaluation of saturation and cross-magnetization effects in interior permanent magnet synchronous motor , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[9]  R.D. Lorenz,et al.  High resolution velocity estimation for all digital, AC servo drives , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[10]  Robert D. Lorenz,et al.  High-Frequency Injection-Based Stator Flux Linkage and Torque Estimation for DB-DTFC Implementation on IPMSMs Considering Cross-Saturation Effects , 2014 .

[11]  Seung-Ki Sul,et al.  Inverter output voltage synthesis using novel dead time compensation , 1996 .

[12]  S. Hiti,et al.  Identification of machine parameters of a synchronous motor , 2003, IEEE Transactions on Industry Applications.

[13]  Kum-Kang Huh,et al.  Comparison of interior and surface PM machines equipped with fractional-slot concentrated windings for hybrid traction applications , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[14]  Hans-Peter Nee,et al.  Determination of d and q reactances of permanent-magnet synchronous motors without measurements of the rotor position , 2000 .

[15]  T.J.E. Miller,et al.  Torque prediction using the flux-MMF diagram in AC, DC, and reluctance motors , 1996 .

[16]  Paolo Guglielmi,et al.  Impact of cross-saturation in sensorless control of transverse-laminated synchronous reluctance motors , 2006, IEEE Transactions on Industrial Electronics.

[17]  Ayman M. El-Refaie,et al.  Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges , 2010, IEEE Transactions on Industrial Electronics.

[18]  T. M. Jahns,et al.  The expanding role of PM machines in direct-drive applications , 2011, 2011 International Conference on Electrical Machines and Systems.

[19]  Robert D. Lorenz,et al.  Deadbeat-Direct Torque and Flux Control of Interior Permanent Magnet Synchronous Machines With Discrete Time Stator Current and Stator Flux Linkage Observer , 2011, IEEE Transactions on Industry Applications.

[20]  S. Jurkovic,et al.  Design and performance of electrical propulsion system of extended range electric vehicle (EREV) Chevrolet Voltec , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[21]  Gianmario Pellegrino,et al.  Experimental Identification of the Magnetic Model of Synchronous Machines , 2013, IEEE Transactions on Industry Applications.

[22]  Gianmario Pellegrino,et al.  Predictive direct flux vector control of Permanent Magnet Synchronous Motor drives , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[23]  N. Bianchi,et al.  Magnetic models of saturated interior permanent magnet motors based on finite element analysis , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[24]  M.F. Rahman,et al.  A Comparative Analysis of Two Test Methods of Measuring$d$- and$q$-Axes Inductances of Interior Permanent-Magnet Machine , 2006, IEEE Transactions on Magnetics.