Shish–kebab-like cylindrulite structures resulted from periodical shear-induced crystallization of isotactic polypropylene

[1]  Dujing Wang,et al.  Effect of Matrix Molecular Mass on the Crystallization of β-Form Isotactic Polypropylene around an Oriented Polypropylene Fiber , 2010 .

[2]  Yong Huang,et al.  Effect of chain disentanglement on melt crystallization behavior of isotactic polypropylene , 2009 .

[3]  R. Androsch,et al.  Mesophase formation in poly(propylene-ran-1-butene) by rapid cooling , 2009 .

[4]  K. Nitta,et al.  Influence of structural organization on tensile properties in mesomorphic isotactic polypropylene , 2009 .

[5]  Dujing Wang,et al.  Shear-induced orientation in the crystallization of an isotactic polypropylene nanocomposite , 2009 .

[6]  Q. Zhang,et al.  Shish–kebab of polyolefin by “melt manipulation” strategy in injection-molding: A convenience pathway from fundament to application , 2008 .

[7]  Shouke Yan,et al.  Initial Stage of iPP β to α Growth Transition Induced by Stepwise Crystallization , 2008 .

[8]  G. Ehrenstein,et al.  Vibration welding of alpha and beta isotactic polypropylenes: Mechanical properties and structure , 2008 .

[9]  Takeshi Karino,et al.  Molecular Basis of the Shish-Kebab Morphology in Polymer Crystallization , 2007, Science.

[10]  Haiqing Hu,et al.  Formation of cylindrite structures in shear-induced crystallization of isotactic polypropylene at low shear rate , 2007 .

[11]  J. Keum,et al.  Thermal Stability of Shear-Induced Shish-Kebab Precursor Structure from High Molecular Weight Polyethylene Chains , 2006 .

[12]  B. Hsiao,et al.  FLOW-INDUCED SHISH KEBAB PRECURSOR STRUCTURES IN ENTANGLED POLYMER MELTS , 2005 .

[13]  Q. Fu,et al.  Vibration‐induced change of crystal structure in isotactic polypropylene and its improved mechanical properties , 2004 .

[14]  P. Zhu,et al.  Morphological distribution of injection-moulded isotactic polypropylene: a study of synchrotron small angle X-ray scattering , 2004 .

[15]  Dujing Wang,et al.  A Scanning Electron Microscopy Study on the Morphologies of Isotactic Polypropylene Induced by Its Own Fibers , 2004 .

[16]  J. Viana.  Development of the skin layer in injection moulding: phenomenological model , 2004 .

[17]  G. Floudas,et al.  Shear induced crystallization in poly(ε-caprolactone): effect of shear rate , 2003 .

[18]  T. Taniguchi,et al.  Crystallization kinetics of polypropylene under high pressure and steady shear flow , 2003 .

[19]  Dujing Wang,et al.  Optical microscopic study on the morphologies of isotactic polypropylene induced by its homogeneity fibers , 2003 .

[20]  B. Hsiao,et al.  Mesophase as the Precursor for Strain-Induced Crystallization in Amorphous Poly(ethylene terephthalate) Film , 2002 .

[21]  M. Nobile,et al.  Shear‐induced crystallization of isotactic poly(1‐butene) , 2002 .

[22]  I. Šics,et al.  Orientation‐induced crystallization in isotactic polypropylene melt by shear deformation , 2002 .

[23]  A. Cunha,et al.  The thermomechanical environment and the microstructure of an injection moulded polypropylene copolymer , 2002 .

[24]  B. Hsiao,et al.  Shear-Enhanced Crystallization in Isotactic Polypropylene. 3. Evidence for a Kinetic Pathway to Nucleation , 2002 .

[25]  A. Nogales,et al.  Shear-induced crystallization of isotactic polypropylene with different molecular weight distributions: in situ small- and wide-angle X-ray scattering studies , 2001 .

[26]  B. Hsiao,et al.  Shear-enhanced crystallization in isotactic polypropylenePart 2. Analysis of the formation of the oriented “skin” , 2000 .

[27]  Cornelia Vasile.  Handbook of Polyolefins , 2000 .

[28]  A. Isayev,et al.  Crystallinity and microstructure in injection moldings of isotactic polypropylenes. Part II: Simulation and experiment , 1999 .

[29]  J. Karger‐Kocsis,et al.  The role of metastability in the micromorphologic features of sheared isotactic polypropylene melts , 1999 .

[30]  Geoffrey R. Mitchell,et al.  The development of organized structures in polyethylene crystallized from a sheared melt, analyzed by WAXS and TEM , 1999 .

[31]  M. Bevis,et al.  Processing and Physical Property Relationships in Injection-Molded Isotactic Polypropylene .2. Morphology and Crystallinity , 1997 .

[32]  M. Bevis,et al.  Processing and physical property relationships in injection‐molded isotactic polypropylene. 1. Mechanical properties , 1997 .

[33]  J. Karger‐Kocsis,et al.  Rules of supermolecular structure formation in sheared isotactic polypropylene melts , 1996 .

[34]  H. Janeschitz-Kriegl,et al.  On the development of oblong particles as precursors for polymer crystallization from shear flow: Origin of the so-called fine grained layers , 1996 .

[35]  A. Jánosi,et al.  Comparative X-ray scattering, microscopical, and mechanical studies on rectangular plates injection molded from different types of isotactic polypropylene , 1996 .

[36]  M. Fujiyama.  Structures and Properties of Injection Moldings of β-Crystal Nucleator-Added Polypropylenes , 1995 .

[37]  J. Karger‐Kocsis,et al.  Interfacial morphologies in carbon fibre-reinforced polypropylene microcomposites , 1995 .

[38]  J. Karger‐Kocsis,et al.  The difference between transcrystallization and shear-induced cylindritic crystallization in fibre-reinforced polypropylene composites , 1994, Journal of Materials Science Letters.

[39]  W. Wenig,et al.  Injection molding of polypropylene: X‐ray investigation of the skin–core morphology , 1993 .

[40]  J. Karger‐Kocsis,et al.  Direct evidence of row-nucleated cylindritic crystallization in glass fiber-reinforced polypropylene composites , 1993 .

[41]  J. Varga.  Supermolecular structure of isotactic polypropylene , 1992, Journal of Materials Science.

[42]  H. Janeschitz-Kriegl,et al.  Crystallization processes in quiescent and moving polymer melts under heat transfer conditions , 1990 .

[43]  M. Fujiyama,et al.  Structure of skin layer in injection‐molded polypropylene , 1988 .

[44]  M. Fujiyama,et al.  Skin/core morphology and tensile impact strength of injection‐molded polypropylene , 1979 .