Compatibilizing effect of maleated polypropylene on the mechanical properties and morphology of injection molded polyamide 6/polypropylene/organoclay nanocomposites

Abstract Polyamide 6/polypropylene (PA6/PP=70/30 parts) blends containing 4 phr (parts per hundred resin) of organophilic modified montmorillonite (organoclay) were prepared using twin screw extruder followed by injection molding. Maleated polypropylene (MAH-g-PP) was used to compatibilize the blend system. The mechanical properties of PA6/PP nanocomposites were studied through tensile and flexural tests. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to assess the fracture surface morphology and the dispersion of the organoclay, respectively. X-ray diffraction (XRD) was used to characterize the formation of nanocomposites. The thermal properties were characterized by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The dynamic mechanical properties of PA6/PP nanocomposites were analyzed by using dynamic mechanical thermal analyzer (DMTA). The strength and stiffness of PA6/PP nanocomposites were improved significantly in the presence of MAH-g-PP. This has been attributed to the synergistic effect of organoclay and MAH-g-PP. The MAH-g-PP compatibilized PA6/PP nanocomposites showed a homogeneous morphology supporting the compatibility improvement between PA6, PP and organoclay. TEM and XRD results revealed the formation of nanocomposites as the organoclay was intercalated and exfoliated. A possible chemical interaction between PA6, PP, organophilic modified montmorillonite and MAH-g-PP was proposed based on the experimental work.

[1]  J. Seppälä,et al.  Oxygen barrier properties of polypropylene/polyamide 6 blends , 1995 .

[2]  Seung‐Man Yang,et al.  Effects of mixing porcedures on properties of compatibilized polypropylene/nylon 6 blends , 1994 .

[3]  J. Jog,et al.  PP/clay nanocomposites: A study of crystallization and dynamic mechanical behavior , 2001 .

[4]  R. K. Datta,et al.  Reactive Compatibilization of Polypropylene and Nylon , 1995 .

[5]  Z. Ishak,et al.  Hygrothermal aging studies of short carbon fiber reinforced nylon 6.6 , 1994 .

[6]  R. Mülhaupt,et al.  Morphological stability of poly(propylene) nanocomposites , 2001 .

[7]  Kiyohito Koyama,et al.  Development of shear flow thermal rheometer for direct measurement of crystallization fraction of polymer melts under shear deformation , 2000 .

[8]  S. Devi,et al.  Relationship between morphology and mechanical properties of binary and compatibilized ternary blends of polypropylene and nylon 6 , 1996 .

[9]  D. R. Paul,et al.  Nylon 6 nanocomposites by melt compounding , 2001 .

[10]  P. Hope,et al.  Polymer Blends and Alloys , 1993 .

[11]  Jiaqi Fan,et al.  Polyamide 6-clay nanocomposites/polypropylene-grafted-maleic anhydride alloys , 2001 .

[12]  O. Park,et al.  Thermal characteristics of organoclay and their effects upon the formation of polypropylene/organoclay nanocomposites , 2000 .

[13]  Marco Zanetti,et al.  Thermal behaviour of poly(propylene) layered silicate nanocomposites , 2001 .

[14]  D. R. Paul,et al.  Impact-modified nylon 6/polypropylene blends: 1. Morphology-property relationships , 1995 .

[15]  R. Mülhaupt,et al.  Poly(propylene)/organoclay nanocomposite formation: Influence of compatibilizer functionality and organoclay modification , 2000 .

[16]  R. Silverstein,et al.  Spectrometric identification of organic compounds , 2013 .

[17]  Jie Yin,et al.  Preparation and properties of montmorillonite/organo-soluble polyimide hybrid materials prepared by a one-step approach , 2001 .

[18]  K. Winey,et al.  Melt intercalation of polystyrene in layered silicates , 1996 .

[19]  A. Coran,et al.  Rubber-Thermoplastic Compositions. Part IX. Blends of Dissimilar Rubbers and Plastics with Technological Compatibilization , 1985 .

[20]  E. Giannelis,et al.  Nanocomposites based on montmorillonite and unsaturated polyester , 1998 .

[21]  J. S. Shelley,et al.  Reinforcement and environmental degradation of nylon-6/clay nanocomposites , 2001 .

[22]  Warren P. Mason,et al.  Introduction to polymer viscoelasticity , 1972 .

[23]  S. Hsiao,et al.  Synthesis and properties of organosoluble polyimide/clay hybrids , 2001 .

[24]  Sang Jin Park,et al.  Morphological, thermal and rheological properties of the blends polypropylene/nylon-6, polypropylene/nylon-6/(maleic anhydride-g-polypropylene) and (maleic anhydride-g-polypropylene)/nylon-6 , 1990 .

[25]  Toshio Kurauchi,et al.  Synthesis of nylon 6-clay hybrid by montmorillonite intercalated with ε-caprolactam , 1993 .

[26]  S. Devi,et al.  The effect of composition on morphological, thermal, and mechanical properties of polypropylene/nylon-6/polypropylene-g-butyl acrylate blends , 1996 .

[27]  Hongbin Zhang,et al.  Synthesis and characterization of nylon 1012/clay nanocomposite , 2002 .

[28]  T. Kurauchi,et al.  Synthesis and properties of polyimide–clay hybrid , 1993 .

[29]  N. Ogata,et al.  Structure and thermal/mechanical properties of poly (∈-caprolactone)-clay blend , 1997 .

[30]  H. Lindberg,et al.  Synthesis of epoxy–clay nanocomposites: influence of the nature of the clay on structure , 2001 .

[31]  M. A. Gómez,et al.  Crystallization kinetics of polypropylene-polyamide compatibilized blends , 1995 .

[32]  O. Park,et al.  The fabrication of syndiotactic polystyrene/organophilic clay nanocomposites and their properties , 2001 .

[33]  K. Seefeldt,et al.  Rheology of Polypropylene/Clay Hybrid Materials , 2001 .

[34]  Jack G. Zhou,et al.  Morphological development in absorbable poly(glycolide), poly(glycolide-co-lactide) and poly(glycolide-co-caprolactone) copolymers during isothermal crystallization , 2000 .

[35]  R. Mülhaupt,et al.  Mechanical and morphological properties of elastomer‐modified polypropylene/polyamide‐6 blends , 1995 .

[36]  A. Okada,et al.  Preparation and Mechanical Properties of Polypropylene−Clay Hybrids , 1997 .

[37]  Rolf Mülhaupt,et al.  Morphology and rheology of polystyrene nanocomposites based upon organoclay , 2000 .

[38]  M. A. Gómez,et al.  Rheological properties, crystallization, and morphology of compatibilized blends of isotactic polypropylene and polyamide , 1997 .

[39]  A. Hasegawa,et al.  Studies on polymer blend of nylon 6 and polypropylene or nylon 6 and polystyrene using the reaction of polymer , 1974 .

[40]  J. Karger‐Kocsis,et al.  The effect of organoclay on the mechanical properties and morphology of injection‐molded polyamide 6/polypropylene nanocomposites , 2004 .