Damage monitoring using fiber optic sensors and by analysing electro-mechanical admittance signatures obtained from piezo sensor

Damage monitoring is the need of the hour in this age of infrastructure. Many methods are being used for damage monitoring in different mechanical and civil structures. Some of them are strain based methods in which abruptly increased strain signifies the presence of damage in the structure. This article focuses on crack monitoring of a fixedfixed beam using fiber optic sensors which can measure strain locally or globally. The two types of fiber optic sensors used in this research are fiber Bragg grating (FBG) and fiber optic polarimetric sensors (FOPS). FBG and FOPS are used for local strain monitoring (at one point only) and global strain monitoring (in the entire specimen) respectively. At the centre of the specimen, a piezoelectric wafer active sensor (PWAS) is also attached. PWAS is used to obtain electromechanical admittance (EMA) signatures. Further, these EMA signatures are analysed to access the damage state in the beam. These multiple smart materials together provide improved information on damages in the specimen which is very valuable for the structural health monitoring (SHM) of the specimen.

[1]  Anand Asundi,et al.  Fibre optic sensors for load-displacement measurements and comparisons to piezo sensor based electromechanical admittance signatures , 2015, Smart Structures.

[2]  Anand Asundi,et al.  On-line health monitoring of smart composite structures using fiber polarimetric sensor , 1999 .

[3]  Chao Wang,et al.  Application of Multiplexed FBG and PZT Impedance Sensors for Health Monitoring of Rocks , 2008, Sensors.

[4]  Anand Asundi,et al.  Efficient design of Fiber Optic Polarimetric Sensors for crack location and sizing , 2015 .

[5]  Roberto Lopez-Anido,et al.  Structural health monitoring of marine composite structural joints using embedded fiber Bragg grating strain sensors , 2009 .

[6]  Hui Liu,et al.  Experimental study on sensing capability of fibre optic and piezoceramic sensors for load monitoring , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  Dragan Coric,et al.  Distributed strain measurements using fiber Bragg gratings in small-diameter optical fiber and low-coherence reflectometry. , 2010, Optics express.

[8]  Anand Asundi,et al.  Structural health monitoring using a fiber optic polarimetric sensor and a fiber optic curvature sensor - static and dynamic test , 2001 .

[9]  J. Sirohi,et al.  Fundamental Understanding of Piezoelectric Strain Sensors , 1999, Smart Structures.

[10]  S. Alkoy,et al.  Piezoelectric Sensors and Sensor Materials , 1998 .

[11]  C. Liang,et al.  Coupled Electro-Mechanical Analysis of Adaptive Material Systems-Determination of the Actuator Power Consumption and System Energy Transfer , 1997 .

[12]  Farhad Ansari Applications of fiber optic sensors in engineering mechanics : a collection of state-of-the-art papers in the application of fiber optic technologies to civil structures , 1993 .

[13]  Anand Asundi,et al.  Effect of the location and size of a single crack on first fundamental frequency of a cantilever beam using fiber optic polarimetric sensors and characterisation of FBG sensors , 2013, Other Conferences.

[14]  R. Measures Structural Monitoring with Fibre Optic Technology , 2001 .

[15]  Ephrahim Garcia,et al.  A Self-Sensing Piezoelectric Actuator for Collocated Control , 1992 .

[16]  Maria Prudenziati,et al.  Resonant pressure sensor based on piezoelectric properties of ferroelectric thick films , 1992 .

[17]  Michael A. Davis,et al.  Fiber grating sensors , 1997 .

[18]  Jung-Ryul Lee,et al.  In-flight health monitoring of a subscale wing using a fiber Bragg grating sensor system , 2003 .

[19]  Venu Gopal Madhav Annamdas,et al.  Practical implementation of piezo‐impedance sensors in monitoring of excavation support structures , 2012 .

[20]  James S. Sirkis Interpretation of Embedded Optical Fiber Sensor Signals , 1993 .

[21]  Kun Zhou,et al.  Fatigue Monitoring of Double Surface Defects Using PZT Based Electromechanical Impedance and Digital Image Correlation Methods , 2014 .

[22]  Chung Bang Yun,et al.  Multiple Crack Detection of Concrete Structures Using Impedance-based Structural Health Monitoring Techniques , 2006 .

[23]  Venu Gopal Madhav Annamdas,et al.  Facts of Piezo Impedance Technique in Crack Propagation Studies for an Engineering Structure , 2012 .