Practical Design Guidelines for the Development of High-Precision Roll-to-Roll Slot-Die Coating Equipment and the Process

This paper proposes practical design guidelines for roll-to-roll (R2R) slot-die coating equipment with a precision mechanism enabling high-accuracy coating performance. The equipment is developed for specially fabricating organic photovoltaic devices. An R2R transportation module (capable of unwinding, in-feeding, out-feeding, and rewinding), a slot-die coating module, a far-infrared drying module, and a cleanliness control module are incorporated into the equipment. When used to apply an organic solution, the developed equipment can provide an operating tension of 2.3%-11.3%, a coating velocity of 2-7 m/min, a coating thickness of 28-95 nm, a uniformity of 8%-23%, and a roughness of 2.86-7.71 nm. A review of this equipment on the basis of theoretical and experimental approaches is included in the detailed equipment specifications and design guidelines for R2R slot-die coating machines.

[1]  Changwan Kim,et al.  A Novel Method to Guarantee the Specified Thickness and Surface Roughness of the Roll-to-Roll Printed Patterns Using the Tension of a Moving Substrate , 2010, Journal of Microelectromechanical Systems.

[2]  Hannes Schache,et al.  Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells , 2009 .

[3]  Soon-Oh Kwon,et al.  The effect of tension on the lateral dynamics and control of a moving web , 2005 .

[4]  Dominique Knittel,et al.  Advanced Motion Control Design for Longitudinal Web Dynamics in Roll-to-Roll Systems: Velocity or Position Control? , 2013 .

[5]  Frederik C. Krebs,et al.  Roll-to-roll coated PBI membranes for high temperature PEM fuel cells , 2012 .

[6]  Hyunkyoo Kang,et al.  Modeling and Matching Design of a Tension Controller Using Pendulum Dancer in Roll-to-Roll Systems , 2011 .

[7]  Hadj Benkreira,et al.  Direct forward gravure coating on unsupported web , 1998 .

[8]  Jie Zhang,et al.  Controlled Growth of Large‐Area High‐Performance Small‐Molecule Organic Single‐Crystalline Transistors by Slot‐Die Coating Using A Mixed Solvent System , 2013, Advanced materials.

[9]  Dominique Knittel,et al.  Modelling and fast position control of a new unwinding-winding mechanism design , 2013, Math. Comput. Simul..

[10]  Jongsu Lee,et al.  An advanced model for the numerical analysis of the radial stress in center-wound rolls , 2016 .

[11]  Ronn Andriessen,et al.  Roll‐to‐Roll Slot–Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors , 2015 .

[12]  Kee-Hyun Shin,et al.  Improvement of cross-machine directional thickness deviation for uniform pressure-sensitive adhesive layer in roll-to-roll slot-die coating process , 2015 .

[13]  Dongjin Lee,et al.  Register control algorithm for high resolution multilayer printing in the roll-to-roll process , 2015 .

[14]  Seyul Kim,et al.  A one-step roll-to-roll process of stable AgNW/PEDOT:PSS solution using imidazole as a mild base for highly conductive and transparent films: optimizations and mechanisms , 2015 .

[15]  F. Krebs,et al.  Roll‐to‐Roll fabrication of large area functional organic materials , 2013 .

[16]  Ji Wang,et al.  Precision design and control of a flexure-based roll-to-roll printing system , 2016 .

[17]  Hyunkyoo Kang,et al.  Statistical analysis for the manufacturing of multi-strip patterns by roll-to-roll single slot-die systems , 2014 .

[18]  Ulrich S. Schubert,et al.  Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices , 2014 .

[19]  Markus Hösel,et al.  Development of Lab‐to‐Fab Production Equipment Across Several Length Scales for Printed Energy Technologies, Including Solar Cells , 2015 .

[20]  Jae-Woong Yu,et al.  Intense pulsed light annealed buffer layers for organic photovoltaics , 2015 .

[21]  Reinhard R. Baumann,et al.  Roll-to-Roll Screen Printed Radio Frequency Identification Transponder Antennas for Vehicle Tracking Systems , 2013 .

[22]  Prabhakar R. Pagilla,et al.  Characteristics of active and passive dancers: A comparative study , 2006 .

[23]  Jan Fyenbo,et al.  Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing , 2010 .

[24]  A. Ugural,et al.  Advanced strength and applied elasticity , 1981 .

[25]  Hyunkyoo Kang,et al.  A study on tension behavior considering thermal effects in roll-to-roll E-printing , 2010 .

[26]  Suren A. Gevorgyan,et al.  Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules , 2014 .

[27]  Janghoon Park,et al.  Roll-to-roll gravure printed silver patterns to guarantee printability and functionality for mass production , 2015 .

[28]  Mehmet Karakaya,et al.  Roll-to-roll production of spray coated N-doped carbon nanotube electrodes for supercapacitors , 2014 .

[29]  R. Baughman,et al.  Carbon Nanotubes: Present and Future Commercial Applications , 2013, Science.

[30]  Kee-Hyun Shin,et al.  Optimized design for anti-reflection coating process in roll-to-roll slot-die coating system , 2014 .

[31]  Young Tae Cho,et al.  Overlay accuracy on a flexible web with a roll printing process based on a roll-to-roll system. , 2015, The Review of scientific instruments.

[32]  Jeongdai Jo,et al.  Design of roll-to-roll printing equipment with multiple printing methods for multi-layer printing. , 2012, The Review of scientific instruments.

[33]  Renata Solarska,et al.  Low-temperature roll-to-roll coating procedure of dye-sensitized solar cell photoelectrodes on flexible polymer-based substrates , 2011 .

[34]  Dongwoo Kang,et al.  Direct and precise measurement of displacement and velocity of flexible web in roll-to-roll manufacturing systems. , 2013, The Review of scientific instruments.

[35]  Christoph J. Brabec,et al.  Determining the coating speed limitations for organic photovoltaic inks , 2013 .

[36]  Hwiyong Choi,et al.  Lateral control system for roll-to-roll fabrication process of organic photovoltaic , 2014 .

[37]  Kee-Hyun Shin,et al.  Roll-to-Roll Coating Technology and Its Applications: A Review , 2016 .

[38]  Frederik C. Krebs,et al.  Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing , 2009 .

[39]  K. P. Vijayakumar,et al.  Improving the performance of ITO/ZnO/P3HT:PCBM/Ag solar cells by tuning the surface roughness of sprayed ZnO , 2015 .

[40]  Janghoon Park,et al.  A 250-mm-width, flexible, and continuous roll-to-roll slot-die coated carbon nanotube/silver nanowire film fabrication and a study on the effect of anti-reflective overcoat , 2016 .

[41]  Kwong-Yang Lee,et al.  Minimum wet thickness in extrusion slot coating , 1992 .

[42]  Jongsu Lee,et al.  Analysis of dynamic thermal characteristic of register of roll-to-roll multi-layer printing systems , 2015 .

[43]  Kyung Hyun Choi,et al.  Highly stable flex sensors fabricated through mass production roll-to-roll micro-gravure printing system , 2015 .

[44]  Sehun Rhee,et al.  A study of the effects of drying and sintering on the performance of organic photovoltaic devices , 2014 .

[45]  Haroon S. Kheshgi,et al.  Low-flow limit in slot coating: Theory and experiments , 2000 .