论文信息 - Overvoltage Calculation on Bam Substation by Monte Carlo Method with Accurate Substation Components Modeling

Overvoltage Calculation on Bam Substation by Monte Carlo Method with Accurate Substation Components Modeling

Insulation design of power equipment is based on the frequency of occurrence of a specific event, the overvoltage probability distribution corresponding to this event, and the failure probability of the insulation. The lightning performance of substation has major influence on the reliability of power system. This paper deals with the evaluation of the overvoltage on Bam substation (230 kV/132 kV substation in the south east of Iran) by using Monte Carlo method. In this simulation accurate available models for substation component are used in ATP.

B. Vahidi | M. Ghorat | E. Goudarzi

[1] Juan A. Martinez-Velasco,et al. Parametric Analysis of the Lightning Performance of Overhead Transmission Lines Using an Electromagnetic Transients Program , 2003 .

[2] F. de Leon,et al. Reduced order model for transformer transients , 1992 .

[3] S. Skok,et al. Simulation of a lightning stroke into transmission line by Monte Carlo method , 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

[4] P. Pinceti,et al. A simplified model for zinc oxide surge arresters , 1999 .

[5] Darlan A. Fernandes,et al. A Coupling Capacitor Voltage Transformer Representation for Electromagnetic Transient Studies , 2003 .

[6] J.A. Martinez,et al. Lightning performance analysis of transmission lines using the EMTP , 2003, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).

[7] J.A. Martinez,et al. Tower modeling for lightning analysis of overhead transmission lines , 2005, IEEE Power Engineering Society General Meeting, 2005.

[8] J.G. Herrera,et al. Statistical evaluation of transferred voltages through transformers due to lightning induced overvoltages , 2003, 2003 IEEE Bologna Power Tech Conference Proceedings,.