Development of cardiac troponin-I biosensor based on boron nitride quantum dots including molecularly imprinted polymer.

The cardiac Troponin-I (cTnI) is one of the subunits of cardiac troponin complexes and a pivotal biochemical marker of acute myocardial infarction (AMI). Due to its myocardial specificity, cTnI is widely used for the diagnosis of AMI diseases. In this study, a novel imprinted biosensor approach based on boron nitride quantum dots (BNQDs) was presented for cTnI detection in plasma samples. Various characterization methods such as scanning electron microscope (SEM), transmission electron microscope (TEM), x-ray diffraction (XRD), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used for all characterizations of nanomaterials. After the characterization analysis, cTnI imprinted electrode was developed in the presence of 100.0 mM pyrrole containing 25.0 mM cTnI. After that, the analytical studies of cTnI in plasma samples were performed by using cTnI imprinted biosensor. The results of the study have revealed that 0.01-5.00 ng mL-1 and 0.0005 ng mL-1 were found as the linearity range and the detection limit (LOD). Moreover, the selectivity of cTnI imprinted glassy carbon electrode (GCE) was investigated for plasma sample analysis in the presence of other nonspecific and specific proteins including cardiac myoglobin (MYG), bovine serum albumin (BSA) and cardiac troponin T (cTnT), respectively. Furthermore, the prepared biosensor was examined in terms of stability, repeatability, reproducibility and reusability. Finally, the imprinted biosensor was applied to the plasma samples having high recovery.

[1]  M. L. Yola,et al.  Direct‐methanol Fuel Cell Based on Functionalized Graphene Oxide with Mono‐metallic and Bi‐metallic Nanoparticles: Electrochemical Performances of Nanomaterials for Methanol Oxidation , 2016 .

[2]  M. de Antonio,et al.  Head-to-head comparison of high-sensitivity troponin T and sensitive-contemporary troponin I regarding heart failure risk stratification. , 2013, Clinica chimica acta; international journal of clinical chemistry.

[3]  Jun‐Jie Zhu,et al.  Electrochemical immunosensor for simultaneous detection of dual cardiac markers based on a poly(dimethylsiloxane)-gold nanoparticles composite microfluidic chip: a proof of principle. , 2010, Clinical chemistry.

[4]  Haydar Yüksek,et al.  A highly selective and sensitive voltammetric sensor with molecularly imprinted polymer based silver@gold nanoparticles/ionic liquid modified glassy carbon electrode for determination of ceftizoxime , 2018 .

[5]  M. A. Mahdi,et al.  High sensitivity and fast response and recovery times in a ZnO nanorod array/p-Si self-powered ultraviolet detector , 2012 .

[6]  Molecular sieves materials modified carbon paste electrodes for the determination of cardiac troponin I by anodic stripping voltammetry , 2005 .

[7]  K. Pyörälä,et al.  Myoglobin, creatine kinase MB, troponin T, and troponin I — rapid bedside assays in patients with acute chest pain , 1999, International journal of clinical & laboratory research.

[8]  D. A. Brownson,et al.  2D Hexagonal Boron Nitride (2D-hBN) Explored for the Electrochemical Sensing of Dopamine. , 2016, Analytical chemistry.

[9]  Peiyi Wu,et al.  Facile preparation and multifunctional applications of boron nitride quantum dots. , 2015, Nanoscale.

[10]  H. Gallardo,et al.  A label-free electrochemical immunosensor based on an ionic organic molecule and chitosan-stabilized gold nanoparticles for the detection of cardiac troponin T. , 2014, The Analyst.

[11]  E. Goldys,et al.  Nanocomposites of gold nanoparticles and graphene oxide towards an stable label-free electrochemical immunosensor for detection of cardiac marker troponin-I. , 2016, Analytica chimica acta.

[12]  Jingquan Liu,et al.  Boron Nitride Quantum Dots with Solvent‐Regulated Blue/Green Photoluminescence and Electrochemiluminescent Behavior for Versatile Applications , 2017 .

[13]  Ying Chen,et al.  Large-scale mechanical peeling of boron nitride nanosheets by low-energy ball milling , 2011 .

[14]  Y. Iwanaga,et al.  Heart Failure, Chronic Kidney Disease, and Biomarkers , 2010 .

[15]  Ulrich Friess,et al.  Cardiac markers: a clear cause for point-of-care testing , 2009, Analytical and bioanalytical chemistry.

[16]  A. Turner,et al.  An electrochemical immunosensor for cardiac Troponin I using electrospun carboxylated multi-walled carbon nanotube-whiskered nanofibres. , 2018, Talanta.

[17]  J. Hale,et al.  Strategic use of immunoprecipitation and LC/MS/MS for trace-level protein quantification: myosin light chain 1, a biomarker of cardiac necrosis. , 2007, Analytical chemistry.

[18]  Se Young Oh,et al.  Electrochemical detection of cardiac troponin I using a microchip with the surface-functionalized poly(dimethylsiloxane) channel. , 2007, Biosensors & bioelectronics.

[19]  Y. Bando,et al.  Hybridization of Au nanoparticle-loaded TiO2 with BN nanosheets for efficient solar-driven photocatalysis , 2014 .

[20]  Jonathan Rivnay,et al.  Combined Optical and Electronic Sensing of Epithelial Cells Using Planar Organic Transistors , 2014, Advanced materials.

[21]  D. Holt,et al.  Markers of myocardial damage. , 1998, Clinical chemistry.

[22]  M. L. Yola,et al.  A Highly Efficient Nanomaterial with Molecular Imprinting Polymer: Carbon Nitride Nanotubes Decorated with Graphene Quantum Dots for Sensitive Electrochemical Determination of Chlorpyrifos , 2017 .

[23]  M. Meyyappan,et al.  Label-free detection of cardiac troponin-I using carbon nanofiber based nanoelectrode arrays. , 2013, Analytical chemistry.

[24]  G. Boriani,et al.  Evaluation of myocardial injury following repeated internal atrial shocks by monitoring serum cardiac troponin I levels. , 2000, Chest.

[25]  S W Sharkey,et al.  Improved detection of minor ischemic myocardial injury with measurement of serum cardiac troponin I. , 1997, Clinical chemistry.

[26]  A. Mulchandani,et al.  Pt nanoparticles-chemical vapor deposited graphene composite based immunosensor for the detection of human cardiac troponin I , 2014 .

[27]  Xuebin Wang,et al.  Highly water-soluble, porous, and biocompatible boron nitrides for anticancer drug delivery. , 2014, ACS nano.

[28]  Mehmet Lütfi Yola,et al.  Electrochemical Detection of Atrazine by Platinum Nanoparticles/Carbon Nitride Nanotubes with Molecularly Imprinted Polymer , 2017 .

[29]  S. H. Tsang,et al.  Controllable Synthesis of Highly Luminescent Boron Nitride Quantum Dots. , 2015, Small.

[30]  E. Wang,et al.  Boron Nitride Quantum Dots as Efficient Coreactant for Enhanced Electrochemiluminescence of Ruthenium(II) Tris(2,2'-bipyridyl). , 2018, Analytical chemistry.

[31]  M. L. Yola,et al.  Molecular imprinting polymer with polyoxometalate/carbon nitride nanotubes for electrochemical recognition of bilirubin , 2017 .

[32]  Se-Hwan Paek,et al.  A fluorescent immunosensor for high-sensitivity cardiac troponin I using a spatially-controlled polymeric, nano-scale tracer to prevent quenching. , 2016, Biosensors & bioelectronics.

[33]  M. L. Yola,et al.  Core-Shell Nanoparticles/Two-Dimensional (2D) Hexagonal Boron Nitride Nanosheets with Molecularly Imprinted Polymer for Electrochemical Sensing of Cypermethrin , 2018 .

[34]  A. Srivastava,et al.  Immunoassay for troponin I using a glassy carbon electrode modified with a hybrid film consisting of graphene and multiwalled carbon nanotubes and decorated with platinum nanoparticles , 2016, Microchimica Acta.

[35]  L. Kubota,et al.  An SPR immunosensor for human cardiac troponin T using specific binding avidin to biotin at carboxymethyldextran-modified gold chip. , 2007, Clinica chimica acta; international journal of clinical chemistry.

[36]  Il-Hoon Cho,et al.  Chemiluminometric enzyme-linked immunosorbent assays (ELISA)-on-a-chip biosensor based on cross-flow chromatography. , 2009, Analytica chimica acta.