New insight into the use of latent catalysts for the synthesis of urea formaldehyde adhesives and the mechanical properties of medium density fiberboards bonded with them

[1]  A. Pizzi,et al.  Comparison of the properties of urea-formaldehyde resins by the use of formalin or urea formaldehyde condensates , 2018, Journal of Adhesion Science and Technology.

[2]  A. Nuryawan,et al.  Swelling Behaviour of Cured Urea–Formaldehyde Resin Adhesives with Different Formaldehyde to Urea Mole Ratios , 2015 .

[3]  Jizhi Zhang,et al.  Effect of Melamine Allocation Proportion on Chemical Structures and Properties of Melamine-Urea-Formaldehyde Resins , 2015 .

[4]  G. Du,et al.  Competitive formation of the methylene and methylene ether bridges in the urea–formaldehyde reaction in alkaline solution: a combined experimental and theoretical study , 2015, Wood Science and Technology.

[5]  P. Ghorbannezhad,et al.  Investigation on MDF market demand in Iran , 2014 .

[6]  Qining Sun,et al.  Effect of different catalysts on urea–formaldehyde resin synthesis , 2014 .

[7]  A. Mendes,et al.  Formaldehyde emission in wood based panels: effect of curing reactions , 2014 .

[8]  A. Nuryawan,et al.  Comparison of thermal curing behavior of liquid and solid urea–formaldehyde resins with different formaldehyde/urea mole ratios , 2014, Journal of Thermal Analysis and Calorimetry.

[9]  V. Causin,et al.  Crystallinity and domain size of cured urea–formaldehyde resin adhesives with different formaldehyde/urea mole ratios , 2013 .

[10]  João Ferra,et al.  Alternative to latent catalysts for curing UF resins used in the production of low formaldehyde emission wood-based panels , 2012 .

[11]  Mário Rui P. F. N. Costa,et al.  Comparison of UF synthesis by alkaline-acid and strongly acid processes , 2012 .

[12]  Byung‐Dae Park,et al.  Hydrolytic stability and crystallinity of cured urea–formaldehyde resin adhesives with different formaldehyde/urea mole ratios , 2011 .

[13]  F. Duvernay,et al.  New insight into the formation of hexamethylenetetramine (HMT) in interstellar and cometary ice analogs , 2011 .

[14]  Todd F. Shupe,et al.  Characterization and Performance of Melamine Enhanced Urea Formaldehyde Resin for Bonding Southern Pine Particleboard , 2011 .

[15]  J. Li,et al.  Study on Properties of Modified Low Molar Ratio Urea-Formaldehyde Resins (I) , 2010 .

[16]  Byung‐Dae Park,et al.  Hydrolytic stability of cured urea‐formaldehyde resins modified by additives , 2009 .

[17]  Byung‐Dae Park,et al.  Dynamic mechanical analysis of urea–formaldehyde resin adhesives with different formaldehyde‐to‐urea molar ratios , 2008 .

[18]  Liu Jian-zhan.  Curing mechanism of urea-formaldehyde resin and its application. , 2007 .

[19]  Byung‐Dae Park,et al.  Effects of formaldehyde to urea mole ratio on thermal curing behavior of urea–formaldehyde resin and properties of particleboard , 2006 .

[20]  T. Pehk,et al.  Hydroxymethylation and polycondensation reactions in urea–formaldehyde resin synthesis , 2006 .

[21]  Byung‐Dae Park,et al.  Differential scanning calorimetry of urea–formaldehyde adhesive resins, synthesized under different pH conditions , 2006 .

[22]  Liu Jianzhang,et al.  Curing Characteristics of Low Molar Ratio Urea-Formaldehyde Resins , 2006 .

[23]  M. Fatehi,et al.  A pharmacological study on Berberis vulgaris fruit extract. , 2005, Journal of ethnopharmacology.

[24]  F. Separovic,et al.  NMR structural elucidation of amino resins , 2004 .

[25]  Zhou Wen-rui.  The new progress of urea-formaldehyde resin with low formaldehyde content and its wood-products with low formaldehyde emission , 2004 .

[26]  Byung‐Dae Park,et al.  Reactivity, chemical structure, and molecular mobility of urea–formaldehyde adhesives synthesized under different conditions using FTIR and solid‐state 13C CP/MAS NMR spectroscopy , 2003 .

[27]  M. Zanetti,et al.  Qualitätssteigerung von MUF-Harzen für Spanplatten und Verringerung des Melaningehaltes durch Puffer und Zusätze , 2003 .

[28]  A. Hüttermann,et al.  Modification of lignin for the production of new compounded materials , 2001, Applied Microbiology and Biotechnology.

[29]  C. Bauschlicher,et al.  On the reaction CH2O+NH3→CH2NH+H2O , 2001 .

[30]  A. H. Conner,et al.  UREA-FORMALDEHYDE ADHESIVE RESINS , 2001 .

[31]  Moon G. Kim.  Examination of selected synthesis parameters for typical wood adhesive-type urea–formaldehyde resins by 13C-NMR spectroscopy. II , 2000 .

[32]  A. Pizzi,et al.  Hexamine hardener behaviour: effects on wood glueing, tannin and other wood adhesives , 1999, Holz als Roh- und Werkstoff.

[33]  A. Pizzi,et al.  Uron and uron–urea-formaldehyde resins , 1999 .

[34]  John A. Youngquist,et al.  Wood-based Composites and Panel Products , 1999 .

[35]  M. Dunky,et al.  Urea–formaldehyde (UF) adhesive resins for wood , 1998 .

[36]  J. Valenzuela,et al.  Theory and Practice of the Preparation of Low Formaldehyde Emission UF Adhesives , 1994 .

[37]  A. Pizzi,et al.  13C NMR analysis method for urea–formaldehyde resin strength and formaldehyde emission , 1993 .

[38]  E. Ferg,et al.  The Correlation of Strength and Formaldehyde Emission with the Crystalline/Amorphous Structure of UF Resins , 1992 .