Standardized Low-Power Wireless Communication Technologies for Distributed Sensing Applications

Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH) and DASH7 Alliance Mode (D7AM), are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA), are based on contention medium access control (MAC) layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT) paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers.

[1]  Pere Tuset,et al.  On the suitability of the 433 MHz band for M2M low‐power wireless communications: propagation aspects , 2014, Trans. Emerg. Telecommun. Technol..

[2]  Glenn Ergeerts,et al.  Survey of the DASH7 Alliance Protocol for 433 MHz Wireless Sensor Communication , 2013, Int. J. Distributed Sens. Networks.

[3]  Philip Levis,et al.  RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks , 2012, RFC.

[4]  Felipe García-Sánchez,et al.  Current Trends in Wireless Mesh Sensor Networks: A Review of Competing Approaches , 2013, Sensors.

[5]  Carlos León,et al.  Five Years of Designing Wireless Sensor Networks in the Doñana Biological Reserve (Spain): An Applications Approach , 2013, Sensors.

[6]  Jonathan Simon,et al.  Channel-Specific Wireless Sensor Network Path Data , 2007, 2007 16th International Conference on Computer Communications and Networks.

[7]  Aloysius K. Mok,et al.  WirelessHART™: Real-Time Mesh Network for Industrial Automation , 2010 .

[8]  Kin K. Leung,et al.  MAC Essentials for Wireless Sensor Networks , 2010, IEEE Communications Surveys & Tutorials.

[9]  Maria Rita Palattella,et al.  6TiSCH Wireless Industrial Networks: Determinism Meets IPv6 , 2014 .

[10]  Pascal Thubert,et al.  Compression Format for IPv6 Datagrams over IEEE 802.15.4-Based Networks , 2011, RFC.

[11]  H M D Utidjian,et al.  The Proposed Standard , 1976 .

[12]  Luis Muñoz,et al.  Integration of Utilities Infrastructures in a Future Internet Enabled Smart City Framework , 2013, Sensors.

[13]  Rafael Asorey-Cacheda,et al.  On Maximizing the Lifetime of Wireless Sensor Networks by Optimally Assigning Energy Supplies , 2013, Sensors.

[14]  Gennaro Boggia,et al.  Standardized Protocol Stack for the Internet of (Important) Things , 2013, IEEE Communications Surveys & Tutorials.

[15]  Cristina Cano,et al.  Low energy operation in WSNs: A survey of preamble sampling MAC protocols , 2011, Comput. Networks.

[16]  Ankur Mehta,et al.  Mitigating Multipath Fading through Channel Hopping in Wireless Sensor Networks , 2010, 2010 IEEE International Conference on Communications.

[17]  Kevin Weekly,et al.  OpenWSN: a standards‐based low‐power wireless development environment , 2012, Trans. Emerg. Telecommun. Technol..

[18]  Maria Rita Palattella,et al.  IETF 6TSCH: Combining IPv6 Connectivity with Industrial Performance , 2013, 2013 Seventh International Conference on Innovative Mobile and Internet Services in Ubiquitous Computing.