A power conversion system for ac furnace with enhanced arc stability

This paper proposes a criterion for ac arc stability and an optimal converter topology for a non-ferrous metal ac arc furnace. The ac arc furnace rated for 36kA/224V/21MW has been investigated. The key parameters of modified Cassie-Mayr arc model have been calculated by the electromagnetic and flow simulations for electric arc. The used arc simulation model has been validated by a laboratory free-burning arc setup. It has been shown that the steepness of arc current at zero-crossing determines the arc stability, and the associated peak arc resistance can be used as its quantitative measure. Among the evaluated three power converter systems, the forced commutated inverter topology with a six-step modulation realizes the steepest current at zero-crossing resulting in the best arc stability. The proposed converter topology having a high degree of arc stability is expected to bring about reliable operation of ac arc furnace and enhanced productivity of the total furnace system.

[1]  S. Alvarez,et al.  Evaluation of IGCTs & IGBTs Choppers for DC Electrical Arc Furnaces , 2004 .

[2]  Henri Foch,et al.  A comparative study of AC/DC converters for high-power DC arc furnace , 2005, IEEE Transactions on Industrial Electronics.

[3]  O. Mayr.  Beiträge zur Theorie des statischen und des dynamischen Lichtbogens , 1943 .

[4]  J. Wikston,et al.  The effect of current and voltage transformers accuracy on harmonic measurements in electrical arc furnaces , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[5]  Yongsug Suh,et al.  Parallel Connection of Integrated Gate Commutated Thyristors (IGCTs) and Diodes , 2009, IEEE Transactions on Power Electronics.

[6]  King Jet Tseng,et al.  An experimentally verified hybrid Cassie-Mayr electric arc model for power electronics simulations , 1997 .

[7]  P. Ladoux,et al.  A new concept of electrical power supply for AC arc furnaces , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[8]  S. B. Dewan,et al.  Application of 46 kV, 100 MVA smart predictive line controller (SPLC) to AC electric arc furnace , 1999, IEEE Power Engineering Society. 1999 Winter Meeting (Cat. No.99CH36233).

[9]  Tomas Larsson.  Voltage source converters for mitigation of flicker caused by arc furnaces , 1998 .

[10]  Yongsug Suh,et al.  Arc stability criteria in AC arc furnace and optimal converter topologies , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.