Layout Optimization for Blended Wing Body Aircraft Structure

AbstractStructural layout design of blended wing body (BWB) aircraft in the preliminary design phase is a challenging optimization problem due to large numbers of design variables and various constraints. A two-loop optimization strategy is proposed to solve the BWB aircraft structural layout design problem considering constraints of the displacement, stress, strain, and buckling. The two-loop optimization consists of an inner loop and an outer loop. The inner loop is to optimize each stiffened panel of the BWB aircraft structure, and outer loop is to find the best layout design. To improve computational efficiency, an equivalent finite element model is applied to BWB aircraft structure analysis, and an analytical method is used for buckling and static analysis of the stiffened panels. The proposed method can efficiently solve the structural layout optimization problem of a notional BWB aircraft with acceptable computational burden. The result indicates the mass of main load-carrying structure of the BWB aircraft is reduced by 9.28% compared to that of the initial structural layout.

[1]  Armando Vavalle,et al.  Aerodynamic considerations of blended wing body aircraft , 2004 .

[2]  Lei Li,et al.  Aircraft wing structural design optimization based on automated finite element modelling and ground structure approach , 2016 .

[3]  Q. Liang,et al.  A level set method for topology optimization of continuum structures with bounded design domains , 2008 .

[4]  Victor Li.  Hybrid Wing Body (HWB) Aircraft Design and Optimization using Stitched Composites , 2015 .

[5]  Tianhang Xiao,et al.  A fast and automatic full-potential finite volume solver on Cartesian grids for unconventional configurations , 2017 .

[6]  Dimitri N. Mavris,et al.  A Parametric and Physics-Based Approach to Structural Weight Estimation of the Hybrid Wing Body Aircraft , 2013 .

[7]  Dawn C. Jegley,et al.  PRSEUS Development for the Hybrid Wing Body Aircraft , 2011 .

[8]  Xing Ouyang,et al.  Structural-Optimization Strategy for Composite Wing Based on Equivalent Finite Element Model , 2016 .

[9]  Frank H. Gern.  Update on HCDstruct - A Tool for Hybrid Wing Body Conceptual Design and Structural Optimization , 2015 .

[10]  R. H. Liebeck,et al.  Design of the Blended Wing Body Subsonic Transport , 2002 .

[11]  Peter Horst,et al.  Multilevel optimization in aircraft structural design evaluation , 2008 .

[12]  Michael Chun-Yung Niu,et al.  Composite airframe structures : practical design information and data , 1993 .

[13]  Michael Chun-Yung Niu,et al.  Airframe Structural Design: Practical Design Information and Data on Aircraft Structures , 1988 .

[14]  Frank H. Gern.  Improved Aerodynamic Analysis for Hybrid Wing Body Conceptual Design Optimization , 2012 .

[15]  Blaine K. Rawdon,et al.  Environmentally Responsible Aviation (ERA) Project - N+2 Advanced Vehicle Concepts Study and Conceptual Design of Subscale Test Vehicle (STV) Final Report , 2011 .

[16]  Haibo Jin,et al.  A Layout Optimization Method of Composite Wing Structures Based on Carrying Efficiency Criterion , 2011 .

[17]  Christos Kassapoglou,et al.  Design and Analysis of Composite Structures: With Applications to Aerospace Structures , 2010 .

[18]  Xing Ouyang,et al.  Flutter analysis for wing structure using finite element modeling with equivalent stiffness , 2014 .

[19]  Vivek Mukhopadhyay.  Hybrid Wing-Body (HWB) Pressurized Fuselage Modeling, Analysis, and Design for Weight Reduction , 2012 .

[20]  Garima Singh,et al.  Topology Optimization of a Blended-Wing-Body Aircraft Structure , 2016 .

[21]  Vivekanand Mukhopadhyay.  Hybrid-Wing-Body Vehicle Composite Fuselage Analysis and Case Study , 2014 .

[22]  Dawn C. Jegley,et al.  Development of the PRSEUS Multi-Bay Pressure Box for a Hybrid Wing Body Vehicle , 2015 .

[23]  Craig L. Nickol,et al.  Hybrid Wing Body Configuration System Studies , 2009 .