Effect of Monolithic LaB6 on the Ablation Resistance of ZrC/SiC Coating Prepared by Supersonic Plasma Spraying for C/C Composites

[1]  Hejun Li,et al.  Ablation behavior of rare earth La-modified ZrC coating for SiC-coated carbon/carbon composites under an oxyacetylene torch , 2016 .

[2]  Yiguang Wang,et al.  Multiple ablation resistance of La2O3/Y2O3-doped C/SiC–ZrC composites , 2015 .

[3]  Xiaohong Shi,et al.  Effect of SiC Location on the Ablation of C/C-SiC Composites in Two Heat Fluxes , 2015 .

[4]  P. David,et al.  High temperature oxidation of two- and three-dimensional hafnium carbide and silicon carbide coatings , 2014 .

[5]  Hejun Li,et al.  Effect of Y2O3 on the oxidation resistant of ZrSiO4/SiC coating prepared by supersonic plasma spraying technique for carbon/carbon composites , 2013 .

[6]  Wei Sun,et al.  Effect of fiber architecture and density on the ablation behavior of carbon/carbon composites modified by Zr–Ti–C , 2013 .

[7]  D. Alfano,et al.  Effects of LaB6 addition on arc-jet convectively heated SiC-containing ZrB2-based ultra-high temperature ceramics in high enthalpy supersonic airflows , 2013 .

[8]  Hejun Li,et al.  Effect of heat flux on ablation behaviour and mechanism of C/C–ZrB2–SiC composite under oxyacetylene torch flame , 2013 .

[9]  Kezhi Li,et al.  Effects of porous C/C density on the densification behavior and ablation property of C/C–ZrC–SiC composites , 2013 .

[10]  Hejun Li,et al.  Ablation behavior and mechanism of C/C–ZrC–SiC composites under an oxyacetylene torch at 3000 °C , 2013 .

[11]  Xiaohong Shi,et al.  Effect of surface ablation products on the ablation resistance of C/C–SiC composites under oxyacetylene torch , 2013 .

[12]  S. Dong,et al.  Fabrication of a ZrC–SiC matrix for ceramic matrix composites via in-situ reaction and its application , 2013 .

[13]  Zhihua Yang,et al.  Oxidation of ZrC–30 vol% SiC composite in air from low to ultrahigh temperature , 2012 .

[14]  Zhihua Yang,et al.  Improved Oxidation Resistance of Zirconium Carbide at 1500°C by Lanthanum Hexaboride Additions , 2011 .

[15]  D. Sciti,et al.  High temperature oxidation of ZrC–20%MoSi2 in air for future solar receivers , 2011 .

[16]  Hejun Li,et al.  Microstructures and Ablation Resistance of ZrC Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying , 2011 .

[17]  William E Lee,et al.  Toward Oxidation-Resistant ZrB2-SiC Ultra High Temperature Ceramics , 2011 .

[18]  Hui Li,et al.  Structure–property differences between supersonic and conventional atmospheric plasma sprayed zirconia thermal barrier coatings , 2011 .

[19]  Erica L. Corral,et al.  Ultra‐High‐Temperature Ceramic Coatings for Oxidation Protection of Carbon–Carbon Composites , 2008 .

[20]  Jiecai Han,et al.  The addition of lanthanum hexaboride to zirconium diboride for improved oxidation resistance , 2007 .

[21]  Hejun Li,et al.  Si–W–Mo coating for SiC coated carbon/carbon composites against oxidation , 2007 .

[22]  Donald M. Curry,et al.  Oxidation microstructure studies of reinforced carbon/carbon , 2006 .

[23]  Xiaohong Shi,et al.  Silicon carbide coating to protect carbon/carbon composites against oxidation , 2005 .

[24]  S. Shimada.  Interfacial reaction on oxidation of carbides with formation of carbon , 2001 .

[25]  G. Blount,et al.  Carbon-carbon composites: a summary of recent developments and applications , 1997 .

[26]  K. Upadhya,et al.  Materials for ultrahigh temperature structural applications , 1997 .

[27]  S. Shimada,et al.  Formation and Microstructure of Carbon‐Containing Oxide Scales by Oxidation of Single Crystals of Zirconium Carbide , 1995 .

[28]  G. Savage.  Carbon-carbon composites , 1993 .

[29]  E. Fitzer.  The future of carbon-carbon composites , 1987 .