Characterization of shear behaviour in consolidated granular biomass

[1]  J. Stickel,et al.  The effects of physical and chemical preprocessing on the flowability of corn stover , 2016 .

[2]  Allison E. Ray,et al.  Evaluating the Pelletization of 'Pure' and Blended Lignocellulosic Biomass Feedstocks , 2015 .

[3]  D. Klingenberg,et al.  Effects of process variables on the yield stress of rheologically modified biomass , 2015, Rheologica Acta.

[4]  Marek Molenda,et al.  Mechanical properties of sawdust and woodchips , 2015 .

[5]  Álvaro Ramírez-Gómez,et al.  Assessment on bulk solids best practice techniques for flow characterization and storage/handling equipment design for biomass materials of different classes , 2015 .

[6]  Hai‐feng Liu,et al.  Effect of granular shape on angle of internal friction of binary granular system , 2015 .

[7]  Haifeng Lu,et al.  Effect of storage time on the flowability of biomass-coal granular system , 2014 .

[8]  P. Marchal,et al.  Rheology of powders and nanopowders through the use of a Couette four-bladed vane rheometer: flowability, cohesion energy, agglomerates and dustiness , 2014, Journal of Nanoparticle Research.

[9]  Hai‐feng Liu,et al.  Gravity discharge characteristics of biomass-coal blends in a hopper , 2014 .

[10]  Enrique Teruel,et al.  Handling behavior of two milled biomass: SRF poplar and corn stover , 2013 .

[11]  Diego Barletta,et al.  Flow properties and arching behavior of biomass particulate solids , 2013 .

[12]  M. Molenda,et al.  The Mechanical Parameters of Rapeseed Cake , 2012 .

[13]  D. Barletta,et al.  The measurement of powder flow properties with a mechanically stirred aerated bed , 2012 .

[14]  D. Klingenberg,et al.  Rheology of concentrated biomass , 2011 .

[15]  Dingena L. Schott,et al.  Physical properties of solid biomass , 2011 .

[16]  Phani Adapa,et al.  Physical and frictional properties of non-treated and steam exploded barley, canola, oat and wheat straw grinds , 2010 .

[17]  Sylvia H. Larsson.  Kinematic wall friction properties of reed canary grass powder at high and low normal stresses , 2010 .

[18]  G. Schoenau,et al.  Compaction characteristics of barley, canola, oat and wheat straw , 2009 .

[19]  J. R. Cooke,et al.  Measuring shear properties and normal stresses generated within a rotational shear cell for consolidated and non-consolidated powders , 2009 .

[20]  Kurt A. Rosentrater,et al.  Flowability and handling characteristics of bulk solids and powders – a review with implications for DDGS , 2008 .

[21]  Klein E. Ileleji,et al.  The angle of repose of bulk corn stover particles , 2008 .

[22]  A. E. Sáez,et al.  Vane Rheology of Cohesionless Glass Beads , 2008 .

[23]  Reg Freeman,et al.  Measuring the flow properties of consolidated, conditioned and aerated powders — A comparative study using a powder rheometer and a rotational shear cell , 2007 .

[24]  B. Moghtaderi,et al.  Flow properties of biomass and coal blends , 2006 .

[25]  Erik Dahlquist,et al.  Methods for determination of moisture content in woodchips for power plants—a review , 2004 .

[26]  N. Solimanjad.  New method for measuring and characterisation of friction coefficient at wide range of densities in metal powder compaction , 2003 .

[27]  Howard A. Barnes,et al.  Rotating vane rheometry — a review , 2001 .

[28]  P. Marchal,et al.  Experimental study of powder rheological behaviour , 1999 .

[29]  A. W. Jenike.  Gravity flow of bulk solids , 1961 .