Implications for Using Biogas as a Fuel Source for Solid Oxide Fuel Cells: Internal Dry Reforming in a Small Tubular Solid Oxide Fuel Cell

The feasibility of operating a solid oxide fuel cell (SOFC) on biogas has been studied over a wide compositional range of biogas, using a small tubular solid oxide fuel cell system operating at 850 °C. It is possible to run the SOFC on biogas, even at remarkably low levels of methane, at which conventional heat engines would not work. The power output varies with methane content, with maximum power production occurring at 45% methane, corresponding to maximal production of H2 and CO through internal dry reforming. Direct electrocatalytic oxidation of methane does not contribute to the power output of the cell. At higher methane contents methane decomposition becomes significant, leading to increased H2 production, and hence transiently higher power production, and deleterious carbon deposition and thus eventual cell deactivation.

[1]  Kevin Kendall,et al.  Biogas powering a small tubular solid oxide fuel cell , 1998 .

[2]  R. Mark Ormerod,et al.  Internal Reforming in Solid Oxide Fuel Cells , 1999 .

[3]  C. Au,et al.  Pulse study of methane partial oxidation to syngas over SiO2-supported nickel catalysts , 1996 .

[4]  R. J. Crookes,et al.  Assessment of simulated biogas as a fuel for the spark ignition engine , 1998 .

[5]  X. Verykios,et al.  Catalytic Partial Oxidation of Methane to Synthesis Gas over Ni-Based Catalysts: I. Catalyst Performance Characteristics☆ , 1998 .

[6]  J. Mcdonald.  Repairing the damaged spinal cord. , 1999, Scientific American.

[7]  S. Goto,et al.  Application of mist pyrolysis method to preparation of Ni/ZrO2 anode catalyst for SOFC type reactor , 2001 .

[8]  Malcolm L. H. Green,et al.  Partial oxidation of methane to synthesis gas, and carbon dioxide as an oxidising agent for methane conversion , 1992 .

[9]  K. L. Tan,et al.  Partial oxidation of methane to syngas over Ni/MgO, Ni/CaO and Ni/CeO2 , 1998 .

[10]  Caine M. Finnerty,et al.  Development of a novel test system for in situ catalytic, electrocatalytic and electrochemical studies of internal fuel reforming in solid oxide fuel cells , 2000 .

[11]  Mahmoud Hammad,et al.  Evaluating variable organic waste to produce methane , 1999 .

[12]  Caine M. Finnerty,et al.  Carbon formation on and deactivation of nickel-based/zirconia anodes in solid oxide fuel cells running on methane , 1998 .

[13]  J. Fouletier,et al.  Catalytic properties of new anode materials for solid oxide fuel cells operated under methane at intermediary temperature , 2001 .

[14]  R. H. Dowdy.  Energy, Agriculture and Waste Management , 1977 .

[15]  N. Minh.  Ceramic Fuel Cells , 1993 .

[16]  G. Marin,et al.  Partial oxidation of methane to synthesis gas over Rh/α-Al2O3 at high temperatures , 1997 .

[17]  Raymond Anthony George,et al.  Status of tubular SOFC field unit demonstrations , 2000 .

[18]  Caine M. Finnerty,et al.  Internal reforming over nickel/zirconia anodes in SOFCS oparating on methane : influence of anode formulation, pre-treatment and operating conditions , 2000 .

[19]  D. Duprez,et al.  Deactivation of steam-reforming model catalysts by coke formation: I. Kinetics of the Formation of Filamentous Carbon in the Hydrogenolysis of cyclopentane on Ni/Al2O3 Catalysts , 1990 .