Fast torque control system of PMSM based on model predictive control

This paper describes a fast torque control system of permanent magnet synchronous motor (PMSM) based on model predictive control (MPC). This torque controller selects directly one of the voltage vector of voltage source PWM inverter considering voltage saturation explicitly. To obtain the fast torque response at the transient state and the stable current response at the steady state, the problem with selecting the voltage vector to output is formulated based on MPC. In this paper, real-time implementation method using a look-up table, which is designed beforehand, is discussed and the experimental results are shown.

[1]  S. Bolognani,et al.  Combined speed and current Model Predictive Control with inherent field-weakening features for PMSM Drives , 2008, MELECON 2008 - The 14th IEEE Mediterranean Electrotechnical Conference.

[2]  Kiyoshi Ohishi,et al.  High-performance speed servo system considering Voltage saturation of a vector-controlled induction motor , 2006, IEEE Transactions on Industrial Electronics.

[3]  S. Doki,et al.  A Novel Current Control System of IPMSM Operating at High Speed based on Model Predictive Control , 2007, 2007 Power Conversion Conference - Nagoya.

[4]  Nesimi Ertugrul,et al.  Field-weakening performance of interior permanent-magnet motors , 2000 .

[5]  Shigeo Morimoto,et al.  Servo drive system and control characteristics of salient pole permanent magnet synchronous motor , 1993 .

[6]  Shigeo Morimoto,et al.  Wide-speed operation of interior permanent magnet synchronous motors with high-performance current regulator , 1994 .

[7]  Seung-Ki Sul,et al.  Overmodulation strategy for high performance torque control , 1996 .

[8]  Jan M. Maciejowski,et al.  Predictive control : with constraints , 2002 .

[9]  Seung-Ki Sul,et al.  A novel dynamic overmodulation strategy for fast torque control of high-saliency-ratio AC motor , 2005, IEEE Transactions on Industry Applications.

[10]  Seung-Ki Sul,et al.  Overmodulation strategy for high performance torque control , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[11]  Hideo Nakai,et al.  Development and testing of the torque control for the permanent-magnet synchronous motor , 2005, IEEE Transactions on Industrial Electronics.

[12]  S. Doki,et al.  Novel Techniques for Fast Torque Response of IPMSM Based on Space-Vector Control Method in Voltage Saturation Region , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[13]  S. Doki,et al.  Harmonic Currents Estimation and Compensation Method for Current Control System of IPMSM in Overmodulation Range , 2007, 2007 Power Conversion Conference - Nagoya.

[14]  Shinji Doki,et al.  Novel Voltage Limiter for Fast Torque Response of IPMSM in Voltage Saturation Region , 2008 .

[15]  S. Doki,et al.  Realization of a fast current control system of PMSM based on model predictive control , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.